• Herbal Formula Science
• /
• v.29 no.4
• /
• pp.331-331
• /
• 2021

• KOMUNHWA
• /
• no.70
• /
• pp.63-88
• /
• 2007

The purpose of this writing is to examine the places and instruments of the dissection for deformed animal carcasses excavated in shellfish stacks of the period of the Proto-Three Kingdoms(삼한) and the Three Kingdoms(삼국). The remains were chosen, which had been excavated and finished in the analysis of the animal carcasses, and the main objects are all shells and deer, especially among Mammalia. As the result, the dissection of shells was not taken place in the habitats of the animals, but inside or around of the residence of the people. For deer, too, it was done in the public place or specific area around and inside the residence. As concerns the method of dissection for shells, for Pelecypoda(부족류), represented by Meretrix lusoria(백합), the inner meat was taken out by wrenching the shell with a kind of small knives, or by boiling, and sometimes by cracking the middle of the shell in the case of big Meretrix lusoria and Dosinorbis japonicus(떡조개). For Rapana venosa(피뿔고둥), representative of Gastropoad(배발류), the people broke the top or some parts of the body to get the inner meat or used some kind of needles and stylus to pick the inner meat out after boiling. Abalones‘ meat was attached firmly to the shell, so very sharp and proper metal instruments were used to take the meat out Relatively small-sized Reishia clavigera(대수리),Top shell(밤고둥) meats were taken out by breaking the top parts after boiling, then sucking the meats, or by picking them out by using needles and stylus in the original shape. In the case of large Mammalia like deer, in the full consideration of the point that deer itself are used in various ways, they were dissected in the order of skinning, taking out the internal organs, cutting front and rear legs, separating joint parts and meats, extracting bone-marrow by 철정, 철부, ironed hand knife in very delicate ways. It seems that skinning, and front and rear legs' cutting were taken place in the place around the residence, on the other hand joint parts' separating and bone-marrow extracting in the residence. The tools for the dissection were confirmed to be hand-knife, honed ax, hammer stone, bondstone, needles and stylus, and some other sharp instrument. They were used properly according to objects.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2011

Oats are an important crop for forage production with good palatability of livestock. Compared with other winter cereals crops for forage, oats may be widely sowing, autumn (October), spring (early of March) and summer (late of August). The objectives of this study were to compare the effects of sowing dates and varieties on the growth, forage yield and feed quality. Oat were sown in 14 October and 10 March, and harvested 20 days after heading in middle region of Korea. Varieties used were the 3 winter oat cultivars with cold tolerant and 3 cultivars for summer sowing. Heading was delayed about 12 days in spring sowing than in autumn sowing and the difference among varieties was 8 days. The rate of spike and leaf above aerial parts reduced and the rate of culm increased in spring sowing than in autumn. The variety 'Donghan' was higher the rate of spike and lower the rate of culm than that of other varieties. In spring sowing than in autumn, acid detergent fiber (ADF) content was higher, and neutral detergent fiber (NDF) and digestible dry matter (DDM) content was lower. In DDM content surveyed on 20 days after heading, 'Donghan' was higher in autumn sowing and 'Samhan' in spring sowing than that of other varieties. The oat variety 'Samhan', 'Donghan' and 'Chohan' were higher fresh yield in autumn than in spring, but similar dry matter yield. The variety 'Swan', 'Darkhorse' and 'Hispeed' were higher fresh and dry matter yield in spring than in autumn. The variety 'Donghan' can supplement high quality forage production in middle region at October and March because of the high-tillering and rate of spike per aerial part.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.155-163
• /
• 2018

The present study was carried out to investigate the physicochemical properties of hot water extracts of red ginseng powder prepared by two-stage hot air drying method using steamed ginseng and steaming liquid for 2.5 h under high-temperature and high-pressure autoclave condition. The total polyphenols, total flavonoids, total sugar, acid polysaccharides and crude saponin in hot water extracts from red ginseng powder were analyzed and determined, and the flavor components of ginseng were measured using color difference meter and an electronic tongue. The total polyphenol, total flavonoid, total polysaccharide, and acid polysaccharide of the red ginseng hot water extract obtained by autoclaving (ARG) were 9.06 mg GAE/g, 3.38 mg NE/g, 35.22 g/100 g, and 10.90 g/100 g, respectively. The final contents of the total polyphenols, total flavonoids, crude saponin were higher than those determined using other red ginseng methods; the time required for steamed red ginseng production reduced. The total ginsenoside content of ginseng including Rb1 was 10.69 mg/g, which is the lowest ARG. The processing conditions affected the conversion to ginsenosides unique to red ginseng. Red ginseng and steaming liquid obtained from the autoclave are expected to be in need for non-food materials and products as well as foods by improving the flavor components through conversion of red ginseng components into low molecular weight.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.226-230
• /
• 2010

'Gwanghan' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2009. It was derived from a cross between 'Early80' and 'Gwiri23'. A parent, 'Early80', has early heading and high yielding, while Gwiri23 has mid-heading with large-size grain. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon and Yeoncheon, respectively. A line, 'SO96016-B-112-YB-12-7', was selected for earliness, cold tolerance, and good agronomic characteristics and designated as a line name of 'Gwiri64'. The line was subsequently evaluated for cold tolerance, earliness, and forage yield in four different locations, Yesan, Iksan, Kimjae, and Jeju, from 2007 to 2009, and finally named as 'Gwanghan'. Over 3 years, the average forage dry matter yield of 'Gwanghan' harvested at milk-ripe stage was $16.4MT\;ha^{-1}$, compared with $15.4MT\;ha^{-1}$ of check cultivar 'Samhan'. 'Gwanghan's' heading date is about 3 days earlier than that of check cultivar, and is adapted primarily for winter cultivation in the mid-southern regions of Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.168-172
• /
• 2009

'Punghan' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2008. It was derived from a cross between 'Beltsville 61-150 (IT133501)' and $F_1$ between 'Sikyonggwiri' and 'PA202-210'. A oat cultivar from USA, 'Beltsville 61-150', has a high cold tolerance, while the $F_1$ between 'Sikyonggwiri' and 'PA202-210' has early heading and high yielding with large-size grain. Subsequent enerations followed by the cross were handled in bulk and pedigree selection programs at Suwon and Yeoncheon, respectively. A line, 'SO99013-B-YB-31', was selected for earliness and good agronomic characteristics and designated as a line name of 'Gwiri 60'. The line 'Gwiri 60' was subsequently evaluated for winter hardiness, earliness, and forage yield in five locations, Yesan, Cheongwon, Iksan, Kimjae, and Jeju, from 2006 to 2008 and finally named as 'Punghan'. Over 3 years, the average forage dry matter yield of 'Punghan' harvested at milk-ripe stage was $14.5\;ton\;ha^{-1}$, compared with $13.6\;ton\;ha^{-1}$ of check cultivar 'Samhan'. 'Punghan' is about 2 days earlier in heading date than check cultivar. 'Punghan' is adapted primarily for winter planting use in the mid-southern regions of Korean peninsula.

• Economic and Environmental Geology
• /
• v.1 no.1
• /
• pp.9-34
• /
• 1968

Manganese ore deposits of the Samhan Changgun Properties are located at the valley of west-lope-side of Changgun-bong (1132m) occupied over the Myon border between Sochon-myon and Jaesan-myon Pongwha-gun, Kyongsang-Pukdo. Geology of the more property and it's vicinity consists of Wonnan formation and Yulri formation of pre-Cambrain and Changgun limestone formation, Mica-schist formation, quartizite formation and Jaesan formation (containing coal bearing zone the unknown age. And granites and dykes were intruded into the above formation later. 1. Management deposits is embedded the formation of Janggun limestone especially Contact zone in the contact zone to of Chunyang Granite limestone enclosed by Granite, and Maginal zone of fault line in the limestone. Therefore, Chunyang Granite is Closely related to ore deposit. Pegmatite which is near by ore deposit was intruded before mineralization and it seems to be a channelway of ore solution. The most important ore deposits of property grouped into south deposit, east deposit, east-Gachon deposit, South-Gachon deposit, Durimgok deposit and West deposit, out-crops at several place. Besides these deposits there also are several prospects on outcrop scathered. Hydrothermal alteration take place strongly in the well rock and it's sequence are Characterized as following; 1) Dolomitization 2) Carbonization 3) Mamgamotozation 4) Pyritization 5) Silicification 6) Oxidation 2. The grade of manganese dioxide is up to Mn 45% in Maximum, but generally, averaging Mn 30~35% of high grade ore and averaging Mn 30~32% of manganese carbonates are mined in his property.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.9
• /
• pp.191-198
• /
• 2019

All over the Republic of Korea, there are many masonry buildings which have been built since 1970s. When the earthquake at Po-Hang occurred, this is the main cause of huge damage because the masonry buildings have not seismic capacity. When masonry buildings are failed, two type of the failure modes can be shown, which are in-plane mode and out-plane mode. In-plane mode can have seismic capacity in masonry so diagonal shear test is performed in this study. The purpose of this study was to find the best way to reinforce the materials through the diagonal shear test. Through the test, shear stress and shear modulus of elasticity will be calculated, referred to the ASTM E 519-02. The variables in this test are ${\phi}3$ wire, three types of wire meshes, polypropylene strap and different types of brick. Each variable is applied to the same condition of the $1.2m{\times}1.2m$ masonry walls which are made by ASTM E 519-02. Compared to each variable with shear stress and shear modulus of elasticity, the best way of reinforcing method to have seismic capacity will be proved in this study.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.5-37
• /
• 2004

A wooden coffin has been given academic attention in Kaya(伽倻), due to the place the stage of Samhan society appropriately in the development of ancient korea history. Special attention must be paid on Dohang-Ri(道項里) woden coffin, since it is expected to explain the origin of Arakaya(阿羅伽倻) in the region of southen korea peninsula. Dohang-Ri wooden coffin is become generally knowen two types, and complete its unique feature in Chin-Han(辰韓) and Byun-Han(弁韓). Recently the fact that Dohang-Ri wooden coffin is discovered only in the king tombs of Chang Won Daho-Ri(昌原茶戶里) and it is remarkable of political connection between Kuya-Kuk (狗邪國) and Anya-Kuk(安邪國). Various ironware unearth of Dohang-Ri has seen similar to that from Daho-Ri, but it has not bronze mirror be maid Chines, symbol with dignity of social position in the ruling ciass. It seems that political unit of Daho-Ri is advanced sociaity and central force than Dohang-Ri in the Byun-Han. The later of two century, I have a think about wooden coffin changes the wooden chamble of Dohang-Ri and Daho-Ri that it go out of sight at AD.2 century. Becouse of possitive achaelogical sites has not confirm, it request radical interpretaion. I inference to accordingly to the it appearance connected of the wars between the eight country of southen regins in korea peninsula at the first half of AD.3 cencury. Exactly, the politial units of Dohang-Ri and Daho-Ri has concentration of trade in Racdong river(洛東江) and Nam river(南江) water system and that give form to coexistence system of economic and political mutuality.

• Journal of architectural history
• /
• v.20 no.3
• /
• pp.23-38
• /
• 2011

The Axes and Adzes are the oldest tools since the beginning of human history which is used to cut the tree and make part of architecture such as boards, square timber etc. Nowadays, these old woodworking tools especially "Jagui(자귀)" (adze) has been almost disappeared at the working site of residential and cultural properties. It is necessary to study Korean traditional woodworking tools to keep Korean traditional skill and technology. It has been reviewed the change of shape of "Jagui(자귀)" (adze) from before Samhan (삼한) period to Joseon Dynasty through excavated relics and paintings and summarize as follows: Based on excavation relics of Dahori, both plate type blade and pocket type blade are used for "Tokki(도끼)" (axe) and "Jagui(자귀)" (adze). The excavated "Jagui(자귀)" (adze) from Jeongbaikri 356 tomb, near Pyongyang is prototype of "Jagui(자귀)" (adze) used nowdays which has almost same shape as well as the insert method of blade and handle. The auxiliary handle is inserted to blade and the main handle is inserted to the auxiliary handle which is different from the method of Chinese and Japanese "Jagui(자귀)" (adze). The length of handle of "Jagui(자귀)" (adze) until late Joseon Dynasty is short by which we assume it is used for a sitting position as hand held Jagui and from that time long handle has been introduced for a standing position which is called "Sunjagui(선자귀)". "Jagui(자귀)" (adze) has been used since the beginning of human history but it is almost disappeared at the most of woodworking site which is the crisis of Korean traditional architecture and we have to do something to keep it.