• Title/Summary/Keyword: 삼중치

Search Result 32, Processing Time 0.023 seconds

Pulp Treatment of Triple Tooth in Primary Dentition: Two Case Reports (유치열에 나타난 삼중치에서 치수 치료 : 증례 보고)

  • Jeong, Hankeul;Lee, Nanyoung;Lee, Sangho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.43 no.2
    • /
    • pp.192-199
    • /
    • 2016
  • Triple tooth is rare in primary dentition; it is the abnormal fusion of three teeth. There are a few reports of double teeth, but triple teeth are rare. These multiple teeth create several clinical problems, not only esthetic problems but also a high caries susceptibility, congenital missing permanent tooth germ(s), orthodontic problems, and periodontal problems. They also make it difficult to perform pulp treatment because of the complex tooth structure. A 1-year 7-month-old male underwent a partial pulpotomy with mineral trioxide aggregate (MTA) when pulp exposure caused by deep caries occurred at a maxillary anterior triple tooth in the first case. The second case was a 1-year 9-month-old male presenting with a fracture line at a mandibular anterior triple tooth. After removing the fractured fragment, a pulpectomy was performed at the remaining primary lateral incisors. Specific complications were not observed during 24 and 6 months of follow-up, respectively.

Parametric Analysis of Design Capacity for Tritium Removal Facility

  • 손순환;정양근;이철언
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.05b
    • /
    • pp.250-255
    • /
    • 1997
  • 중수로형(PHWR) 원자력발전소는 감속재와 냉각재로 중수를 사용하고 있어 방사성 수소동위원소인 삼중수소 생성량이 경수로에 비해 크며 계통내 삼중수소 축적량은 운전년수에 따라 증가하게 된다. 중수로형 원전에서 삼중수소 저감화를 위한 장기 대책으로 Tritium Removal Facility를 적용하는 경우, 우선적으로 괴려하여야 할 사항은 적절한 TRF의 용량을 결정하는 것이다. 이는 초기 시설 투자비뿐만 아니라 설비 및 운전의 신뢰도와 이용율에도 영향을 미치므로 연속운전이 가능하도록 용량을 결정하는 것이 중요하다. 이를 위해 감속재를 대상으로 삼중수소 농도 목표치, 삼중수소 농도 목표치 도달기간, 탈 삼중수소율, TRF 적용시점이 TRF 처리량과 촉매탑 높이에 미치는 영향을 분석하였다. 삼중수소 농도 목표치는 5~15Ci/kg, 도달기간은 3~8년, 탈 삼중수소율은 0.05~0.4, TRF 적용시점은 가동 후 10~20년이 적절한 것으로 확인되었다.

  • PDF

TRIPLE TOOTH IN MAXILLARY PRIMARY INCISORS : CASE REPORT (상악 유전치부에 발생한 삼중치 : 증례보고)

  • Lee, Je-Woo;Ra, Ji-Young;Lee, Kwang-Hee;An, So-Youn;Kim, Yun-Hee;Lee, Hye-Lim
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.40 no.1
    • /
    • pp.60-65
    • /
    • 2013
  • The term 'triple tooth' is used to describe a rare dental abnormality in which three teeth appear to be joined. The literature contains many reports of joined primary teeth; most cases have involved, however, the joining of two teeth, and only rarely three teeth. Triple tooth has clinical problems such as dental caries, esthetic problems, malocclusions, and periodontal problems. Therefore, it may require multi-disciplinary approach. The present study describes rare case of triple tooth between maxillary primary central and lateral incisors and a supernumerary tooth. An one-year, eleven-month old girl was seen for evaluation of swelling in the labial gingiva above a right maxillary triple tooth. She experienced traumatic dental injury in that area three weeks ago. Intraoral examination revealed an abscess and fistula in the region of the triple tooth. A radiographic examination showed that right lateral incisor was missing. Endodontic treatment and composite resin restoration was performed on the triple tooth. After follow-ups of 7 months period, there were no marked complications.

Comparison of Measured and Predicted $^3H$ Concentrations in Environmental Media around the Wolsung Site for the Validation of INDAC Code (주면피폭선량 평가코드(INDAC)의 검증을 위한 월성원전 주면 삼중수소 농도 실측치와 예측치의 비교 평가)

  • Jang, Si-Young;Kim, Chang-Kyu;Rho, Byung-Hwan
    • Journal of Radiation Protection and Research
    • /
    • v.25 no.2
    • /
    • pp.75-80
    • /
    • 2000
  • The predicted results of INDAC code were compared with measured $^3H$ concentrations in air and pine-needle around the Wolsung site. The optimal sets of input data to INDAC were in addition selected by comparing the measured values with the predicted values of INDAC based on various conditions such as the release modes of effluents into the environment, the classification of wind classes, and the consideration of terrain. The predicted $^3H$ concentrations in air and pine-needle were shown to have good agreement with measured values, although there are some limitations such as uncertainties in measured values, complex topology around the site, and the land-sea breeze effects. The assumption on the $^3H$ behavior in vegetables or plants that the ratio of $^3H$ concentration in plant water to $^3H$ concentration in atmospheric water is 1/2 was shown to be conservative in terms of the audit calculation performed by the regulator. It was also found that data sets based on mixed mode and no terrain data were not appropriate for the audit calculation ensuring the compliance with regulations. Thus, if the mixed mode is considered as the release mode of effluents into the environment, meteorological data measured at 58 m height and terrain data should be used to evaluate the atmospheric dispersion factor.

  • PDF

핵융합연료 삼중수소 분리반응탑 전산모사

  • 정흥석;이한수;안도희;황재영;김상환;손순환;정양근;송명재;일본명
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05c
    • /
    • pp.453-457
    • /
    • 1996
  • 월성원자력발전소에서 생성되는 삼중수소는 핵융합로의 필수원료물질이다. 삼중수소 분리반응 탑에 소요되는 다단탑의 단수와 최적운전온도 및 반응탑의 효율을 결정하기 위하여, 흡수층과 촉매층으로 구성된 분리반응탑을 모델링하고, 전산코드를 작성하였다. 이 전산코드의 결과는 실험치와 잘 일치하였으며, 최소반응단수를 갖는 설계온도는 8$0^{\circ}C$임이 밝혀졌다.

  • PDF

An Assessment on the Contribution of $^3$He to the Tritium Generation in the CANDU PHWR (가압중수로에서 헬륨-3이 삼중수소의 생성에 미치는 영향평가)

  • Kwak, Sung-Woo;Chung, Bum-Jin
    • Journal of Radiation Protection and Research
    • /
    • v.22 no.2
    • /
    • pp.119-125
    • /
    • 1997
  • PHWR achieves high neutron economy by adopting heavy water as its moderator and coolant. On the other hand it permits much tritium generation, compared to LWR, due to the neutron capture reaction of deuterium in heavy water. Meanwhile in the reactor core, $^3He formed as the result of-decay of tritium, captures a thermal neutron and transforms to tritium again. The existing calculation models on tritium generation in PHWR neglect the contribution of $^3He$ in both moderator and coolant due to its relatively low solubility. However the neutron capture cross-section of $^3He$ is almost $1.6{\times}10^7$ times as large as that of deuterium. That means that the dissolved amount of 0.03 ppm of $^3He$ in heavy water is enough to generate the same amount of tritium as that generated by the deuterium of total heavy water in the system. This study dealt with the contribution of $^3He$ to tritium generation. As a sample case, the contribution of $^3He$ to the tritium generation in Wolsong #1 was evaluated and compared to the measured values. According to the result of this study, it is concluded that $^3He$ in coolant contributes very much to the tritium generation but that in moderator shows negligible effects due to the low solubility and $^4He$ cover gas. At the beginning of the plant operation, the contribution of $^3He$ is slightly greater than the measured value but agrees well with the measured as the operating time increases.

  • PDF

Prediction of the Tritium Behavior in Very High Temperature Gas Cooled Reactor Using TRITGO (TRITGO 코드를 이용한 초고온가스로 (VHTR) 삼중 수소 거동 예측)

  • Park, Jong-Hwa;Park, Ik-Kyu;Lee, Won-Jae
    • Journal of Radiation Protection and Research
    • /
    • v.33 no.3
    • /
    • pp.113-120
    • /
    • 2008
  • In this study, The TRITGO code was introduced, which can predict the amount of tritium production, it's transport, removal, distribution and the level of contamination for the produced hydrogen by the tritium on the VHTR (very high temperature gas cooled reactor). The TRITGO code was improved so that the permeation to the IS Iodine Sulfide) loop for producing the hydrogen can be simulated. The contamination level of the produced hydrogen by the tritium was predicted by the improved code for the VHTR with 600MW thermal power. The contamination level for the produced hydrogen by tritium was predicted as 0.055 Bq/$H_2-g$. This level is three order of lower than the regulation value of 56 Bq/$H_2-g$ from Japan. From this study, the following results were obtained. it is important that the fuel coating (SiC layer) should be kept intact to prevent the tritium from releasing. Also it is necessary that the level of impurity such as 3He and Li in the helium coolant and the reflector consisting of the graphite should be kept as low as possible. It was found that the capacity of the purification system for filtering the impurities directly from the coolant will be the important design parameter.

EFFECT OF PRIMARY DOUBLE TEETH ON THE DEVELOPMENT OF PERMANENT SUCCESSORS (유치의 이중치와 계승영구치의 발육에 관한 연구)

  • Ra, Ji-Youn;Kim, Dae-Eop;Lee, Kwang-Hee
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.31 no.2
    • /
    • pp.136-143
    • /
    • 2004
  • The purpose of this study was to investigate the relationship between morphology and position of deciduous double teeth, and the occurrence of other dental anomalies in the same subject. Four morphological types were indentified according to Ailing's classification: type I, bifid crown-single root; type II, large crown-large root; type III, two fused crowns-single root; type IV, two fused crowns-two fused roots. Fifty-four double teeth were found in a total of 1,803 children, who had visited Wonkwang university hospital for dental treatment from January 1, 2003 to September 30, 2003. All of these children were examined clinically and intra-oral radiographs were taken. The results were as follows; 1. 49 children(2.7%) had more than one double teeth, 5 of these children had two double teeth on the bilateral side. And one child showed triple teeth which has three crowns and three roots. 2. Double teeth were predominantly situated in the anterior region, with a preference for the mandible. The ratio of cases involving central incisor and lateral incisor was higher than other cases. 3. There were 25 cases(46.2%) of missing successors among 54 cases of the double teeth. And, prevalence of the missing teeth was highest in the cases involving maxillary central incisor and lateral incisor. 4. In the case of type II(large crown-large root) had more missing successors.

  • PDF

An Analysis of Sound Transmission Loss of Multiple Window Partitions (다중 유리창의 음향투과손실에 관한 연구)

  • 김현실;강현주;김재승
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1994.04a
    • /
    • pp.59-64
    • /
    • 1994
  • 본 논문에서는 다중 유리창의 STL값을 예측하는 방법에 대해 연구하였다. 유리창의 크기는 무한하다고 가정하였으며 음향 4단자방법을 이용하였으나 기존의 모델과는 달리 음파의 입사는 오나전한 확산음장이 아닌 각도에 따른 변화가 있다고 가정하였으며 또한 지지부의 댐핑도 고려하였다. 본 연구에서 제시된 방법을 사용하여 이중 및 삼중창의 여러가지 경우에 대해 계측치와 비교하였다. 본 방법은 유리가 아닌 강판, 석고보다 등 일반적인 탄성체와 흡음재가 배열된 경우에도 적용이 가능하나 여러 계측치와의 비교를 통해 문제점 및 응용성에 대해서 언급하였다.

  • PDF

Triplication of upper right primary anterior teeth : a case report (상악 우측 유전치부에 발생한 삼중치 : 증례 보고)

  • Bae, Sangyong;Lee, Jewoo;Ra, Jiyoung
    • The Journal of the Korean dental association
    • /
    • v.57 no.10
    • /
    • pp.588-594
    • /
    • 2019
  • The fusion is an anomalous union of two or more tooth germ at some stage in the development process resulting in a decreased number of teeth in the dental arch. Fusion is common odontogenic anomaly but triplication of primary teeth is a rare phenomenon. We report a case of a 3 - year - old girl who visited our clinic for the pain on maxillary anterior tooth. The patient was diagnosed by the fusion of a the maxillary primary right central and lateral incisor with a supernumerary tooth and caries of dentine. And then, Endodontic treatment and composite resin restoration were performed on the triple teeth. After follow-up of 6 months period, there was no marked complications.

  • PDF