• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.277-284
• /
• 2020

The remaining range between missile and target can be used to calculate the guidance command as well as to determine the explosion time of the warhead. Since the range, however, is not directly measured by on-board sensors of the missile, it is usually estimated by filter-based techniques using angle-only measurements. Conventional filter-based techniques are complex and require huge computation. In this paper, we propose a range estimation algorithm based on the geometrical triangulation principle for two points of missiles and a target. The proposed algorithm has a simple structure but the accuracy is largely dependent on the measurement errors. To improve the accuracy of estimation, Digital Fading Memory Filter (DFMF) is applied. The performance of the proposed algorithm is analyzed through numerical simulations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.87-93
• /
• 2014

Cadastral parcel objects as polygons are fundamental dataset which represent land administration and management of the real world. Thus it is necessary to assure topological seamlessness of cadastral datasets which means no overlaps or gaps between adjacent parcels. However, the problem of overlaps or gaps are frequently found due to non-coinciding edges between adjacent parcels. These erroneous edges are called uncertain edges, and polygons containing at least one uncertain edge are called uncertain polygons. In this paper, we proposed a new algorithm to efficiently search parcels of uncertain polygons between two adjacent cadastral datasets. The algorithm first selects points and polylines around adjacent datasets. Then the Constrained Delaunay Triangulation (CDT) is applied to extract triangles. These triangles are tagged by the number of the original cadastral datasets which intersected with the triangles. If the tagging value is zero, the area of triangles mean gaps, meanwhile, the value is two, the area means overlaps. Merging these triangles with the same tagging values according to adjacency analysis, uncertain edges and uncertain polygons could be found. We have performed experimental application of this automated derivation of partitioned boundary from a real land-cadastral dataset.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.157-164
• /
• 1997

This study deals with GPS-photogrammetry practicability by C/A-code reception. It allows data to be acquired and analyzed fast. Combined block adjustment method was applied at the topographical map production of coast-land. And we compared it that of conventional block adjustment. As a result, it was found that accuracy was very sensitive to the arrangement and number of control points. The accuracy in the horizontal and vertical was $\pm{2cm}$ if all of the control points was available. however accuracy was not affected at additional parameters for systematic errors' elimination and it leads to bad results when the number of control points was few and arrangement of control points was not stabilized. GPS observations were added in block adjustment, but the accuracy of block was not upgraded due to the low accuracy of C/A-code reception. So relative positioning method with carrier phases was required for high accuracy and it is expected that CPS photogrammetry with C/A-code will be used widely according to the improvement of observation methods and the development of receiver.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.459-464
• /
• 2004

본 연구는 서로 다른 원점을 가진 구소삼각원점지역과 통일원점지역간의 연속지적도 접합에 있어서 수치지적도를 이용하여 제작한 두 원점지역의 연속지적도 접합도와 최신 항공측량기법으로 생성한 수치정사사진을 중첩ㆍ조정함으로써 상이한 원점으로 제작된 연속지적도 접합에 관한 효율적인 성과 유지 방안을 도출함으로써 국민들에게 측량성과에 대한 신뢰도를 높이고, 도해지적측량의 대안으로 신속하고 정확한 수치적 해석기법의 측량방법을 활용하고자 한다.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.227-233
• /
• 2015

The recent health care is growing rapidly want to receive offers users a variety of medical services, can be exploited easily exposed to a third party information on the role of the patient's hospital staff (doctors, nurses, pharmacists, etc.) depending on the patient clearly may have to be classified. In this paper, in order to ensure safe use by third parties in the health care environment, classify the attributes of patient information and patient privacy protection technique using hierarchical multi-property rights proposed to classify information according to the role of patient hospital officials The. Hospital patients and to prevent the proposed method is represented by a mathematical model, the information (the data consumer, time, sensor, an object, duty, and the delegation circumstances, and so on) the privacy attribute of a patient from being exploited illegally patient information from a third party the prevention of the leakage of the privacy information of the patient in synchronization with the attribute information between the parties.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.408-416
• /
• 2010

A study on the calibration of an X-band HPS(Hongik Polarimetric Scatterometer) system for ground-based operation is presented in this paper. In order to calibrate the scatterometer system, the degree of its distortions are analyzed by comparison between theoretical- and measured-values using the theoretically well-known calibration targets such as a metal sphere, a trihedral corner reflector(CR) and a metal cylinder. The calibration works in the field conditions depend on the precise and stable measurements of those calibration target. we present a measurement technique, so-called, an automatic 2-D target-scanning technique, using the incidence-angle(${\xi}-$ and ${\phi}-$ directions) control of HPS system. Then, we used STCT(Single-Target Calibration Technique) and GCT(General Calibration Technique) to calibrate a distortion of the scatterometer system, and measured the polarimetric RCS(Radar Cross Section) and phase-difference of a trihedral-CR as a test-target to verify the accuracy of the calibration technique. Then, three different types(i.e., 10, 20, 30 cm) of trihedral-CR were used. we obtained the error ranges about ${\pm}1.0$dB, ${\pm}0.5$ dB in a polarimetric RCS and about $-20^{\circ}{\sim}0^{\circ}$ and ${\pm}5^{\circ}$ in the co-polarized phase-difference by using the GCT and STCT, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.283-290
• /
• 2001

This paper demonstrates the performance of industrial precise measurement using the digital close-range photograrmmetric system based on a off-the-shelf CCTV-type CCD camera. The system was constructed with a CCD camera and a PC with a frame grabber, coupled with digital image mensuration and self-calibrating bundle adjustment techniques. An artificial fish reef with cubic shape was taken as an object for the application test of the system and the digital images were acquired on multi-station convergent network around the object. The geometric calibration of the CCD camera and the phototriangulation of the entire surface of the object was carried out simultaneously by means of self-calibrating bundle adjustment technique. Also the system comprising a high resolution still-video camera Kodak DCS, which high accuracy potential has been already established, were employed in similar network condition. Then the results from two different camera systems were compared in the accuracies of phototriangulation.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.71-82
• /
• 2006

This paper propose a realtime tracking algorithm of mobile object in indoor environment. this proposed system selects location data closer to mobile objects in real time that are results of Triangulation method and DCM(Database Correlation Method)method. Also, this system applies adjusted location data selected by using Kalman filter, and in result it improved location accuracy of transfer object. Be studied in existing the Kalman filter have unstable location data until its settlement because of it extracts current values by using the past the information. However, proposed location tracking system don't apply existent Kalman filter to this system and it permits precisional tracking location by uses more effective methods.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.22-24
• /
• 2002

이동 IP 망에서 이동 IP의 삼각 라우팅 문제를 해결한 최적경로 IP 라우팅 기법은이동 IPv6망에서의 이동성을 지원하는 기본 동작으로 되어있다. 본 논문에서는 이동 IP망의최적 경로 기법을 NBMA망에서의 NHRP를 이용한 단거리 터널설정 기법을 적용하여 그 성능을 평가하였다. 패킷 전달지연 시간 측면에서 기존 IP 라우팅 기법과 최적 경로에서의단거리 터널링 기법을 상호 비교하기 위하여 수학적 분석 및 모의실험을 수행하였다. 최적경로의 단거리 터널링 기법은 기존 IP 라우팅 방식보다 초기 데이터의 경우 종단간 전달 지연시간이 클 수 있으나 이후 패킷부터는 종단간 데이터 전달 지연시간이 대폭 개선됨을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.544-547
• /
• 2012

본 논문은 Proxy Mobile IPv6 환경에서 모바일 노드의 통신이 경로 최적화 기법을 적용한 상태에서 다른 MAG로의 이동성을 보장하는 경로 최적화 기법에 대해 연구하였다. Proxy Mobile IPv6 환경에서 삼각 라우팅 문제를 해결하기 위해 경로 최적화를 수행할 때 빠른 처리 속도와 안정성을 가지는 방법을 이동성과 함께 보장하는 방법에 대해 연구하였다. 본 논문에서는 기존의 경로 최적화 기법 중 Liebsch의 기법과 Dutta의 기법들의 문제점인 높은 시그널링 비용이나 이중 소비가 발생하는 비효율적인 측면이 있다. 본 논문에서는 적은 시그널링 비용으로 Local Mobility Anchor와 Mobile Access Gateway로부터 메시지를 받을 경우 모바일 노드의 다른 MAG 간 이동성을 보장하는 경로 최적화 기법에 대해 연구하였다.