• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.66-74
• /
• 2001

Plate bending process is indispensible in shipbuilding. The process includes press bending process and heating process. Especially the heating process is carried out exclusively by skillful workers. Many researches have been made to automate the heating process. This study was carried out as a fundamental study to develop a efficient analysis method for triangle heating and focused on clarifying the deformation characteristics of plate by triangle heating and essential elements effect on the deformation. In this paper, we proposed an analysis model for thermal-elastic-plastic analysis and simulated the deformation by triangle heating using ANSYS based on the experimental results of Jang et al.(2001). Also, we showed the deformation characteristics more clearly by comparing the deformation due to triangle heating and line heating in case that the total heat input is same. Finally, we investigated the change characteristics of deformation elements according to the volumetric heat input.

• Journal of the Korean association of regional geographers
• /
• v.17 no.1
• /
• pp.1-16
• /
• 2011

Today, the name of Changjiang (Yangtze) Delta Region is used to designate an economic region which consists of sixteen cities including Shanghai City. The region has achieved the highest rate of economic growth in the world as well as in China since China its opened its toward the world market. The aim of this study is to examine the modern transition of spatial structure in the region after the opening (1978) and the membership of WTO (2000). In the examination, the study divides the spatial structure into three aspects: industrialization, urbanization and economic integration. The outcome of examination suggests that spatial division of industry, horizontally and vertically, has not reached a satisfactory level even if it is still in progress. The study proposes that the intervention of government in the market and company activity has hindered the spatial division of industry including service sector between the cities, and thus the economic integration. It further suggests that the specialization of urban function has not entered into the maturing stage, with the shortage of mid-size cities that would mediate spatial-economically between the large-size cities and the small-size cities in the urban hierarchy.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.50-57
• /
• 2011

For effective and accurate prediction of overpressure in the Efomeh field, located in the Niger delta basin of Nigeria, integrated seismic and borehole analyses were undertaken. Normal and abnormal pore pressure zones were delineated based on the principle of normal and deviation from normal velocity trends. The transition between the two trends signifies the top of overpressure. The overpressure tops were picked at regular intervals from seismic data using interval velocities obtained by applying Dix's approximation. The accuracy of the predicted overpressure zone was confirmed from the sonic velocity data of the Efomeh 01 well. The variation to the depth of overpressure between the predicted and observed values was less than 10mat the Efomeh 01 well location, with confidence of over 99 per cent. The depth map generated shows that the depth distribution to the top of the overpressure zone of the Efomeh field falls within the sub-sea depth range of 2655${\pm}$2m (2550 ms) to 3720${\pm}$2m (2900 ms). This depth conforms to thick marine shales using the Efomeh 01 composite log. The lower part of the Agbada Formation within the Efomeh field is overpressured and the depth of the top of the overpressure does not follow any time-stratigraphic boundary across the field. Prediction of the top of the overpressure zone within the Efomeh field for potential wells that will total depth beyond 2440m sub-sea is very important for safer drilling practice as well as the prevention of lost circulation.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.61-75
• /
• 2007

Deep foundations have been popularly installed in hard stratum such as gravels or rocks in Korea. However, it is necessary to consider sand or sandy gravel layers that locate at the mid-depths as the bearing stratum of piles in the thick Nakdong River deltaic deposits, as done in the Chaophraya (Bangkok) and Mississippi River deltas. This study was focused on the finding of suitable methods for estimating bearing capacity when driving prestressed high-strength concrete (PHC) piles to a required depth in the deltaic area. Ground investigation was performed at five locations of two sites in the deltaic area. Bearing capacity of the driven piles has been computed using a number of proposed methods such as CPT-based and other analytical methods, based on the ground investigation and comparison one another other. Five PDA (pile driving analyzer) tests were systematically carried out at the whole depths of embedded piles, which is a well-blown useful technique for the purposes. As the results, the bearing capacities calculated by various methods were compared with the PDA and static load testing results. It was found that the shaft resistance is significantly governed by set-up effects and then the long-term value agrees well with that of the $\beta$ method. Also, the design methods for toe resistance were determined based on the SLT result, rather than PDA results that led to underestimation. Moreover, using the CPT results, appropriate methods were proposed for calculating the bearing capacity of the piles in the area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.190-193
• /
• 1998

최근 들어 컴퓨터와 네트워크의 발전에 기인하여 일상업무의 대부분을 컴퓨터를 이용하여 할 수 있으므로 신원 확인은 중요한 분야로 부상되었으며, 지문은 편리한 입력과 종생불변하고 만인부동한 특성으로 생체 측정 분야 중 가장 각광받고 있는 분야가 되었다. 지문은 입력 방법에 따라 중심점과 삼각주를 전부 취득하는 회전 지문과 손가락을 회전하지 않고 취득한 평면 지문으로 나뉜다. 지문 인식 기술은 특징점 추출과 분류 그리고 매칭으로 나뉘는 AFIS에 이용되는 기술과 분류기술은 생략할 수 있는 검증 기술이 있는 데 본 논문에서는 AFIE에 관련된 전반적인 기술에 관하여 기술한다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.158-163
• /
• 2003

한반도 서ㆍ남해안은 크고 작은 만과 해빈, 삼각주, 하구, 조간대 등 다양한 연안해역이 잘 발달 되어 있다 평균조차는 서해안 남부에서 약 3m로 북쪽으로 갈수록 증가하여 군산 부근에 6m, 인천 부근에서 약 8m에 달하며, 남해안의 평균조차는 부산 1.2m, 진해 2.1m, 충무 2.6m, 삼천포 3.0m, 여수 3.3m, 완도 3.5m, 목포 3.7m로 조석 간만의 차가 크게 나타나서 연안해역에 폭넓은 조간대가 형성되어 있다. (중략)

• The Optical Journal
• /
• s.120
• /
• pp.62-62
• /
• 2009

• Journal of the Korean Institute of Educational Facilities
• /
• v.23 no.3
• /
• pp.25-29
• /
• 2016

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.41-45
• /
• 1996

비접촉방법데 의한 변위 측정기술은 공작물의 가공중(in-process)형상치수의 측정 또는 각종 계 측에 대한 자동화기술의 필요성이 증대됨에 따라 다양한 원리를 응용하여 발전되고 있다. 전통적인 방법으로는 가변 리럭턴스(variable reluctance)형, 와전류(eddy current)형, 콘덴서(capacitance)형 등의 전기적 센서들이 주를 이루고 있으나 최근에 들어서는 광전자기술의 발달에 힘입어 여러 광학 측정법들이 연구되어 실용화 되고 있다. 본 연구에서는 측정자동화 용도로 사용될 수있는 광삼각법에 의한 비접촉방식의 광학센서에 대한 기본 연구 결과를 서술하였다. 광삼각 비접촉 측정의 기본 원리와 측정 범위 및 분해능 관점에서의 센서 설계의 기본 방법을 제시하며 또한, 실제적인 센서의 설계 및 제작을 위해 응용될 수 있는 기본광학소자의 현 기술적 수준과 성능을 기술하였다. 최종적으로는 실제적인 센서의 설계제작 과정과 시제품의 성능 실험을 통한 응용 가능성이 검토되었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.1
• /
• pp.15-20
• /
• 1995

Fuzzy membership functions are some kinds of mapping function for the fuzzification and the defuzzification. Triangle-shaped fuzzy membership functions are widely used in fuzzy controller, for it is easy to implement. In these membership functions, it is known that narrower fuzzy sets permit finer control near the operating point than that far from the operating point. $Supp{\acute{o}}se$ we have a membership function with narrower triangle near zero and wider triangle far from zero. The membership function will make fine control when small input is given and rough control at large input. Therefore the performance of the controller with that membership function will be enhanced. This paper presents how the width of triangle base in the fuzzy membership function has influence on the output using geometrical approaches.