• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.396-401
• /
• 2014

Nanomaterials have been widely used in many fields. This study investigates the effects of metal oxide nanoparticles (CuO, NiO, $TiO_2$, $Fe_2O_3$, $Co_3O_4$, ZnO) on germination and germination index (G.I.) of seeds, Lactuca and Raphanus. Under aqueous exposure, CuO on Lactuca shows the most significant impacts on activities compared to others, showing $EC_{50s}$ for germination and G.I. as 0.46 mg/L and 0.37%, respectively. The effects of nanoparticle phytotoxicity on seed Lactuca was much higher than that of Raphanus. In general, the toxicities on seed germination and germination index were as following orders : CuO > ZnO > NiO ${\gg}$ $TiO_2$, $Fe_2O_3$, $Co_3O_4$. No measurable inhibition was observed at 1,000 mg/L (maximum exposure concentration) of $TiO_2$, $Fe_2O_3$, $Co_3O_4$.

• Particle and aerosol research
• /
• v.14 no.3
• /
• pp.65-72
• /
• 2018

Core-shell structured $Fe_3O_4/graphene$ composites were synthesized by aerosol spray drying process from a colloidal mixture of graphene oxides and $Fe_3O_4$ nanoparticles. The structural and electrochemical performance of $Fe_3O_4/graphene$ were characterized by the field-emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, cyclic voltammetry, and galvanometric discharge-charge method. Core-shell structured $Fe_3O_4/GR$ composites were synthesized in different mass ratios of $Fe_3O_4$ and graphene oxide. The composite particles were around $3{\mu}m$ in size. $Fe_3O_4$ nanoparticles were encapsulated with a graphene. Morphology of the $Fe_3O_4/graphene$ composite particles changed from a spherical ball having a relatively smooth surface to a porous crumpled paper ball as the content of GO increased in the composites. The $Fe_3O_4/GR$ composite fabricated at the weight ratio of 1:4 ($Fe_3O_4:GO$) exhibited higher specific capacitance($203F\;g^{-1}$) and electrical conductivity than as-fabricated $Fe_3O_4/GR$ composite.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.337.1-337.1
• /
• 2016

단일벽 탄소나노튜브(Single-walled carbon nanotubes, SWNTs)는 나노 스케일의 크기와 우수한 물성을 갖고 있어, 전자, 에너지, 바이오 등 다양한 분야로의 응용이 기대되고 있다. 이러한 응용의 실현을 위해서는 경제적, 산업적인 면에서 보다 손쉬운 합성법이 요구된다. SWNTs의 합성에는 대면적의 균일한 CNTs를 합성할 수 있다는 장점이 있는 열화학기상증착법(Thermal chemical vapor deposition, TCVD)이 가장 일반적으로 사용되고 있다. 하지만 탄화수소가스를 효율적으로 분해하기 위하여 $900^{\circ}C$ 이상의 고온공정이 요구되며, 이는 경제적, 산업적인 면에서 사용이 제한적이다. 따라서 저결함, 고수율의 SWNTs를 저온합성 할 수 있는 공정의 개발이 지속적으로 필요하다. 본 연구에서는, TCVD법을 이용하여 에틸렌 원료가스로 SWNTs의 저온합성 가능성을 확인하였다. 합성을 위한 기판과 촉매로는 실리콘 산화막 기판(SiO2/Si wafer)에 철 나노입자를 지닌 ferritin을 스핀코팅 후 산화하여 이용하였다. 저온합성 공정의 변수로는 합성온도와 원료가스인 에틸렌의 분율을 설정하여, 변수가 SWNTs의 결정성과 수율에 미치는 영향을 고찰하였다. 합성된 SWNTs의 분석의 용이함과 손지기(Chirality)의 제어 가능성을 확인하기 위하여 나노 다공성 물질인 제올라이트(Zeolite)를 보조 기판으로 사용하였다. 실험결과 에틸렌 원료가스로 합성한 SWNTs는 메탄을 원료가스로 사용한 경우보다 낮은 $700^{\circ}C$ 부근에서도 합성이 가능함을 확인하였다. 또한 에틸렌의 분율과 합성 시간의 정밀한 제어를 통해 SWNTs의 합성온도를 더욱 감소시키는 것도 가능할 것으로 예상된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.239.1-239.1
• /
• 2015

1차원 탄소나노재료이며 한 겹의 흑연을 말아 놓은 형태인 단일벽 탄소나노튜브(Single-walled carbon nanotubes, SWNTs)는 감긴 형태에 따라 반도체성, 금속성 성질을 나타내는 특이성과 우수한 기계적 성질을 지니고 있어 광범위한 분야로 응용이 기대되어왔다. 이러한 SWNTs의 응용가능성을 실현시키기 위해서는 보다 경제적, 산업적인 면에서 손쉬운 합성방법의 개발이 필요한 실정이다. SWNTs의 합성 방법들로는 아크방전법과 레이저 증발법, 그리고 열화학기상증착법(Thermal chemical vapor deposition, TCVD) 등이 이용되었다. 이 중 TCVD법은 대면적의 균일한 CNTs를 합성할 수 있다는 장점이 있다. 그러나 탄화수소가스를 효율적으로 분해하기 위하여 $800^{\circ}C$ 이상의 고온 공정이 요구되며, 이는 경제적, 산업적인 면에서 사용이 제한적이다. 따라서 저결함, 고수율의 SWNTs를 저온합성 할 수 있는 공정의 개발이 지속적으로 필요하다. 본 연구에서는, TCVD법을 이용하여 에틸렌 원료가스로 SWNTs의 저온합성 가능성을 확인하였다. 합성을 위한 기판과 촉매로는 실리콘 산화막 기판(SiO2/Si wafer)에 철 나노입자를 지닌 ferritin을 스핀코팅 후 산화하여 이용하였다. 저온합성 공정의 변수로는 합성온도와 원료가스인 에틸렌의 분율을 설정하여, 변수가 SWNTs의 결정성과 수율에 미치는 영향을 고찰하였다. 합성된 SWNTs의 분석의 용이함과 손지기(Chirality)의 제어를 위하여 나노 다공성 물질인 제올라이트(Zeolite)를 보조 기판으로 사용하였다. 실험결과 에틸렌 원료가스로 합성한 SWNTs는 $700^{\circ}C$ 부근의 저온에서도 합성이 가능함을 확인하였다. 또한 에틸렌 원료가스의 분율과 합성시간의 정밀한 제어를 통해 SWNTs의 합성온도를 더욱 감소시키는 것도 가능할 것으로 예상된다.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.490-494
• /
• 2007

Dispersants were prepared from petroleum pyrolysis residual oil (PPRO) through sulfonation. Without employing a conventional polynaphthalene sulfonate formaldehyde condensate (PNS) process, the dispersants (NPS) were synthesized by a simpler process only in 2 h. The chemical structure of new dispersant, which has various naphthalene derivative groups, was similar to PNS conformed by UV-visible spectroscopy curves. The new dispersants demonstrated high dispersing ability in inorganic suspension ; cement, $Fe_2O_3$, and $CaCO_3$.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.67-81
• /
• 2012

The physical, chemical, and biological properties of clogging materials formed within groundwater wells in the Mt. Geumjeong area, Busan, Korea, were characterized. The particle size distribution (PSD) of clogging materials was measured by a laser analyzer. XRD, SEM, and TEM analyses were performed to obtain mineralogical information on the clogging materials, with an emphasis on identifying and characterizing the mineral species. In most cases, PSD data exhibited an near log-normal distribution; however, variations in frequency distribution were found in some intervals (bi-or trimodal distributions), raising the possibility that particles originated from several sources or were formed at different times. XRD data revealed that the clogging materials were mainly amorphous ironhydroxides such as goethite, ferrihydrite, and lapidocrocite, with lesser amounts of Fe, Mn, and Zn metals and silicates such as quartz, feldspar, micas, and smectite. Reddish brown material was amorphous hydrous ferriciron (HFO), and dark red and dark black materials were Fe, Mn-hydroxides. Greyish white and pale brown materials consisted of silicates. SEM observations indicated that the clogging materials were mainly HFO associated with iron bacteria such as Gallionella and Leptothrix, with small amounts of rock fragments. In TEM analysis, disseminated iron particles were commonly observed in the cell and sheath of iron bacteria, indicating that iron was precipitated in close association with the metabolism of bacterial activity. Rock-forming minerals such as quartz, feldspar, and micas were primarily derived from soils or granite aquifers, which are widely distributed in the study area. The results indicate the importance of elucidating the formation mechanisms of clogging materials to ensure sustainable well capacity.

• Clean Technology
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2015

This study investigated the effects of six metal oxide nanoparticles (NPs: CuO, NiO, TiO₂, Fe₂O₃, Co₃O₄, ZnO) on seed germination and germination index (G.I) for five types of seeds: Brassica napus L., Malva verticillata L., Brassica olercea L., Brassica campestris L., Daucus carota L. NPs of CuO, ZnO, NiO show significant toxicity impacts on seed activities [CuO (6-27 mg/L), ZnO (16-86 mg/L), NiO (48-112 mg/L)], while no significant effects were observed at > 1000 mg/L of TiO₂, Fe₂O₃, Co₃O₄. Tested five types of seed showed different sensitivities on seed germination and root activity, especially on NPs of CuO, ZnO, NiO. Malva verticillata L. seed was highly sensitive to toxic metal oxide NPs and showed following EC₅₀s : CuO 5.5 mg/L, ZnO 16.4 mg/L, NiO 53.4 mg/L. Mostly following order of toxicity was observed, CuO > ZnO > NiO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂, where slightly different toxicity order was observed for carrot, showing CuO > NiO ≈ ZnO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.91-99
• /
• 2011

The turbidity in several wells of Samdong-myeon, Ulsan, exceeded potable groundwater standard (1 NTU). Mineralogical analysis showed that the fine suspended particles are ferrihydrite spheres with a size of less than $0.5\;{\mu}m$ and helical iron-oxidizing bacterial filaments, and their aggregates. Ferrihydrite was almost amorphous only showing two electron diffraction rings, and contained Si and P. Helical bacterial filaments were almost replaced by ferrihydrite. The helical bacteria have played an important role in the ferrihydrite formation by becoming the loci for ferrihydrite precipitation as well as oxidizing ferrous iron. The physicochemical conditions of low pH, low redox potential, high Ca concentration, and high alkalinity are consistent with the hydrogeochemical characteristics of carbonate groundwater, implicating that the inflow of deep ferriferous carbonate groundwater and its oxidation have caused the ferrihydrite turbidity in several wells of the study area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.500-507
• /
• 2008

By Using various grinding mill in powder cosmetics manufacturing process; screen milt and pin mill, jet mill, properties of the powder and grinding mills were studied; talc, mica, nylon powder, silica, titanium dioxide. Besides, the experiments fur evaluation of grinding were performed by using iron oxides those are tracers. In powders of plate shape, they were grinded more vertically than horizontally at the screen mill and pin mill, although were all grinded vertically and horizontally at the jet mill. The spheric powders became the primary particles or aggregation by electrostatic interaction at the screen mill and pin mill. But, at the jet mill, they resulted the agglomeration or transformation or damage up to 2bar. Titanium dioxides became the primary particles by all grinding mill. Pin mill has an excellent result in experiments which is a change of the tone of color by grinding. From these results, suggest that the jet mill is used to pre-treat of powders of plate shape in practical cosmetic manufacturing process, and the screen mill and pin mill are used to match the color of powder cosmetics. If industrial process condition is taken into consideration, suggest that 4times of grinding is excellent on grinding effect by the screen mill, and twice grinding by the pin mill and grind air pressure of 1bar by the jet mill.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.3
• /
• pp.167-173
• /
• 2008

Pearlescent pigments have been widely used in cosmetic applications. Up to date; the most widely used pearl effect pigment is the mica-based pigment, which uses natural mica as the substrate that is in turn coated with metal of oxide interference layer. However, when natural mica is employed as a base material the final product often has a yellowish color, mainly due to the fact that natural mica contains low levels of iron as an impurity[1,2]. This study was focused on developing a pearl pigment which might have a similar sparkling effect as snow. This effect was found to be due to its structure and purity, and this concept was also applied to development of our pearl pigments. More specifically, this invented pearl effect pigments are the mixture of glass-flake and glass-flake coated metal oxides and present the optical properties of snow matrix such as refractive index and particle size, unlike only the glass-flake or glass-flake coated metal oxides to be applied in. Using base material having similar physical properties (refractive index and particle size) as snow matrix as platelet for pearl effect pigments, these invented pigments present a three-dimensional glittering effect of the snow matrix. With this invented figments an applied; we achieved the beauty of snow crystal from makeup products containing these pigments.