• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.58-58
• /
• 2001

• 한국전기화학회:학술대회논문집
• /
• 2001.06a
• /
• pp.167-170
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.288-288
• /
• 1998

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.195-198
• /
• 2004

• Resources Recycling
• /
• v.21 no.3
• /
• pp.15-20
• /
• 2012

In this paper, we carried out separation of membrane and leaching of Pt and Ru using hydrochloric acid from MEA(membrane-electrode assembly) of fuel cell. In this method, these were separated from MEA of fuel cell using the distilled water, 10 vol.% butanol solution and 15 vol.% cationic surfactant(Koremul-LN-7) by dipping method without the dispersion of catalyst particles. And the leaching of Pt and Ru containing in the separated carbon paper catalysts has been studied by hydrochloric acid using $HNO_3$ or $H_2O_2$ as a oxidant. The leaching ratio of Pt and Ru were higher when $H_2O_2$ was used as a oxidant and the optimum conditions were obtained in 8M HCl, the amount of $H_2O_2$ 5M and 6 hours of leaching time at $90^{\circ}C$. In this condition, extraction of Pt and Ru were 98% and 71.5%, respectively.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.147-153
• /
• 2007

A simple, selective and highly sensitive flow injection catalytic method was presented for determination of ruthenium based on its catalytic effect on the oxidation of pyronin B by periodate in pH=1.0. The reaction rate is controlled specrophotometricaly by monitoring the dye absorbance at 555 nm. The optimized conditions make it possible to determine ruthenium in the ranges of 0.1-10.0 ng/mL (r2=0.9982) and 10.0-50.0 ng/mL (r2=0.9934) with a detection limit of 0.04 ng/mL and a sample rate of 30±5 samples/h. Relative standard deviation for the results of five replicate measurements does not exceed 1.44%. The proposed method has been successfully applied for quantitation of ultra trace amounts of ruthenium in some environmental and biological samples.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.21-26
• /
• 2002

A supercapacitor was developed using an amorphous ruthenium oxide material. The electrode of supercapacitor was prepared using an amorphous ruthenium oxide, which was synthesized from ruthenium trichloide hydrate$(RuCl_3{\cdo5}xH_2O)$. Thin film of tantalum was used as a current collector because it had wide. potential window characteristics than titanium and 575304 materials. A supercapacitor was assembled with ruthenium oxide as an electrode active material and 4.8M sulfuric acid solution as an electrolyte. The specific capacitance of the electrode was tested by a cyclic voltammetry using a half cell. The maximum differential specific capacitances during the oxidative and the reductive scans were 710 and $645\;F/g-RuO_2{\cdot}nH_2O$, respectively. The average specific capacitance was $521\;F/g-RuO_2{\cdot}nH_2O$. The assembled supercapacitor was protonated to the potential level of 0.5V vs. SCE. Super-capacitor, which was adjusted to the appropriate protonation level, had the specific capacitance of $151\;F/g-RuO_2{\cdot}nH_2O$ based on the concept of full cell.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.10a
• /
• pp.91-92
• /
• 2006

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.246-250
• /
• 1997

In the presence of optimum amounts of hydroxylamine, trace ruthenium(III) can be conveniently determined in acidic (boric) media by coupling catalytic hydrogen processes with adsorptive accumulation of the catalyst, using differential pulse voltammetry. Cyclic voltammetry was used to characterize the redox and interfacial processes. Optimal experimental conditions were found to be a stirred borate (0.015 M, pH 2.5) solution containing 0.55 M hydroxylamine, a preconcentration potential of - 0.70 V, and a scan rate of 5 mV/s. With a 7 min accumulation period the detection limit was 3${\times}$10-10 M. The possible interferences by other platinum group metals are investigated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.336-337
• /
• 2015

$TiO_2$는 표면적이 넓고 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되며, 최근 물분해 전극 적용 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 이러한 문제를 해결하기 위해 촉매제의 도핑이 연구되고 있으며 본 연구에서는 표면에 촉매를 도핑시키기 위한 두가지 방법을 연구하였다. 일반적으로 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이며 촉매가 균일하게 도핑이 될수록 성능은 향상된다. 본 연구에서는 루테늄을 촉매로 선택하였으며 서로 다른 도핑 방법과 용매 하에서 물분해 실험을 진행하여 두 가지 방법의 물분해 효율을 비교하였다.