• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.549-556
• /
• 1998

To develop the effective methods of flowering stimulation, Hinoki cypress (Chamaecyparis obtusa Sieh. et Zuec.) grafts growing in a seed orchard and in a clone bank in Southern Breeding Station of Cheju were applied with gibberellin treatments, and predicted the seed production potential. In the seed orchard, $GA_{4/7}$ 1.5cc was injected into the stem of drafts and sprayed whale tree crown with $GA_3$ 300ppm and $GA_{4/7}$ 300ppm. Un the other hand, in the clonal archives, drafts were given intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark wind $GA_3$ 20mg and sprayed with $GA_3$ 300ppm. Additionally, grafts growing in the seed orchard were treated with gibberellins at 3 different periods of time and 3 different treatments during the growing season. The results obtained here are summarized as follows : 1. All of the applications of Gilbberellin promoted female flower formation. Among these, the treatment of intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark was racist effective, followed by the spraying of $GA_3$ 300ppm. Similarly, the applications of gibberellin promoted male flower formation. 2. Regarding the time of applications, treatment on August 15 was more effective than those of August 31 and September 11 in the stimulation of female flowers. On the contrary, there was no significant difference in the number of male flowers among 3 different time treatments. 3. It was supposed that the application of the intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark on August 15 showing the best effect in female flower formation can produce 22.12kg seeds per ha. 4. Considerable significant difference existed among clones for both female and male flower formations. 5. Flower formation, especially female flower formation, seemed to be partially associated with the genetic potential of individual trees.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1087-1097
• /
• 2017

This study aims to find the best model to fit the number of insurance solicitor's turnovers of life insurance companies using count data regression models such as poisson regression, negative binomial regression, zero-inflated poisson regression, or zero-inflated negative binomial regression. Out of the four models, zero-inflated negative binomial model has been selected based on AIC and SBC criteria, which is due to over-dispersion and high proportion of zero-counts. The significant factors to affect insurance solicitor's turnover found to be a work period in current company, a total work period as financial planner, an affiliated corporation, and channel management satisfaction. We also have found that as the job satisfaction or the channel management satisfaction gets lower as channel management satisfaction, the number of insurance solicitor's turnovers increases. In addition, the total work period as financial planner has positive relationship with the number of insurance solicitor's turnovers, but the work period in current company has negative relationship with it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.14-20
• /
• 2018

Electric vehicles are environmentally friendly because they emit no exhaust gas, unlike gasoline automobiles. However, since they are driven by the electric power from batteries, the distance they can travel based on a single charge depends on their energy density. Therefore, the lithium-ion battery having a high energy density is a good candidate for the batteries of electric vehicles. Since the electrode is an essential component that governs their efficiency, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the coating process is a critical step in the manufacturing of the electrode, which has a significant influence on its performance. In this paper, we propose an innovative process for improving the efficiency and productivity of the coating process in electrode manufacturing and describe the equipment design method and development results. Specifically, we propose a design procedure and development method in order to improve the core plate coating quality by 25%, using a technology capable of reducing the assembly margin due to its high output/high capacity and improving the product capacity quality and assembly process yield. Using this method, the battery life of the lithium-ion battery cell was improved. Compared with the existing coating process, the target loading level is maintained and dispersed to maintain the anode capacity (${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$ reduction).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1367-1375
• /
• 2010

In this study, optimization of the process parameters of the resistance spot welding of a sheet of aluminum-coated boron alloyed steel, 22MnB5, used in hot stamping has been performed by a Taguchi method to increase the strength of the weld joint. The process parameters selected were current, electrode force, and weld time. The heating temperature and heating time of 22MnB5 are considered to be noise factors. It was known that the variation in the thickness of the intermetallic compound layer between the aluminum-coated layer and the substrate, which influences on the formation of nugget, was generated due to the difference of diffusion reaction according to heating conditions. From the results of spot weld experiment, the optimum weld condition was determined to be when the current, electrode force, and weld time were 8kA, 4kN, and 18 cycles, respectively. The result of a test performed to verify the optimized weld condition showed that the tensile strength of the weld joint was over 32kN, which is considerably higher than the required strength, i.e., 23kN.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.123-135
• /
• 1999

The rapid increase of Passenger cars which is caused by the discomfort of Public transit and the Preference of automobiles is the major factor of increasing traffic congestions in Seoul With the point that leading the automobilists to the Public transit can be the most important Policy to ease these traffic congestions, this study focuses on the behavioral aspects of company employees and university students and investigates factors influencing bus ridership. To be brief, by estimating bus ridership through count models, this study investigates factors which influence bus ridership and elicits Political suggestions which lead automobilists to Public transit. The Purpose in this study is the application of appropriate count data model. The count data models have been widely applied to the economic area from the middle of the 1980s and to transportation aspect mainly in the foreign countries from the latter half of the 1980s. Even though a few studies in this country employed count data model to count data. all of them were Poisson regression models without suitable tests for the importance of the model specification. In the end, as the result of statistical test, negative binomial regression model which is suitable for overdispersed data was found to be appropriate for the data of weekly bus ridership. To emphasize the importance of model specification, both of poisson regression model and negative binomial regression model were estimated and the results were compared.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.52-59
• /
• 2013

This study was carried out to develop the proper cultivation methods of Brachythecium rivulare and Myuroclada maximowiczii which showed high-value for the interior landscaping and potting. Growth of two moss species cultivated in the compost covered with cloth was vigorous compared to that grown in containers only using cloth or compost, and their harvesting processes were easier. The growth and harvest easiness of mosses cultivated in compost were great rather than in bark or peatmoss. Compared to division, the spray of crushed mosses using mixer was effective for both gametophyte generation and their harvesting processes. In addition, the optimum inoculum for each container ($27{\times}17{\times}3cm$) was 2.0 g in B. rivulare and 4.0 g in M. maximowiczii. Overall growth of B. rivulare treated with nutrient solution (N:P:K=20:20:20) was inhibited compared to control, fresh-weight gain was reduced toward the higher concentration. But fresh-weight gain of M. maximowiczii was the highest with $0.25g{\cdot}L^{-1}$ treatment. Therefore, adequate moisture supply, after spraying crushed mosses (2.0 and 4.0 g each) in the compost covered with cloth, were the appropriate cultivation methods for B. rivulare and M. maximowiczii. Nutrient solution treatment with low concentration, during the cultivation period, would be the proper way only for M. maximowiczii.

• Korean journal of applied entomology
• /
• v.26 no.1 s.70
• /
• pp.9-12
• /
• 1987

The control effect of three systemic insecticides on the brown planthopper; carbofuran 3G, disyston 3G, and omethoate 50% EC, which have been used to control of the insect pests on rice crop in its early growing season, were evaluated. Soil incorporation and water broadcasting methods before transplanation were used for carbofuran and disyston, and omethoate was applied as foliar spray 6 days after transplanation. Ten pairs of newly emerged adults were inoculated on June 11, 21, July 2, 11, and 25. The number of the brown planthoppers on the rice plane were examined by means of direct reading. The three insecticides were effective for about ten days regardless of application methods, thereafter, fail to control of the insects except carbofuran. By means of soil incorporation, carbofuran could control the insects effectively for 45 days or longer, and it seemed to be able to control the progeny of the migrated brown planthopper until middle or late June.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.247-252
• /
• 2006

For the spring ephemeral and myrmecochorous perennia, Corydalis filistipes Nakai (Fumariaceae), rare and narrow endemic to Ullung Island in Korea, genetic diversity and structure of 4 subpopulations of the species were investigated with allozyme markers. Levels of genetic diversity (A=1.73, $P_{95%}$=61..2%, Ho=0.201, He=0.167) were relatively lower than those of other endemic species with widespread distribution range, but considerably higher than other endemic species with similar life history traits isolated in island. The moderate level of genetic diversity within subpopulations in C. filistipes is characteristic of the species with predominantly outcrossing, myrmecochorous seed dispersal by dual function of the elaisome and mode of sexual and asexual reproduction by the cleistogamy. The analysis of fixation indices showed an overall excess of heterozygotes (mean $F_{IS}=-0.1889,\;F_{IT}=-0.1226$) relative to H-W expectations. About 5.6% of the total genetic variation was found among subpopulations ($F_{ST}$=0.0557). The strategies of reasonable conservation and management, and the maintenance mechanism of genetic diversity of Corydalis filistipes Nakai, endemic plant species in Korea were discussed.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.375-381
• /
• 2008

Various problems such as durability degradation may happen when extra water is added to concrete. Because of these reasons, the change of water content is managed by using rapid evaluation method of unit water content such as electric capacity method, heat drying method making use of micro wave, unit capacity mass method among various methods. Especially, in Japan, guidance for the change of water content ($\pm$ 10, 15, 20 kg/$m^3$ etc.) were regulated and used. However, it is the real situation that the guidance which were regulated in South Korea evaluate suitability only considering production and measurement error under the circumstances which are not considering the degree of durability degradation. Therefore, this study tries to investigate the influence of addition of extra water in the concrete on the durability degradation of concrete when it was added by artificial manipulation or by management error. From the test results, a guideline of the contents of extra water for the quality control is suggested with the consideration of the degree of durability degradation and the probable error resulted from the addition of extra water. The contents of extra water for tests are set as 0, 15, 25, 35 kg/$m^3$. To examine the durability degradation of concrete, freezing and thawing, carbonation, chloride penetration and compressive strength are tested.