• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.52-59
• /
• 2013

This study was carried out to develop the proper cultivation methods of Brachythecium rivulare and Myuroclada maximowiczii which showed high-value for the interior landscaping and potting. Growth of two moss species cultivated in the compost covered with cloth was vigorous compared to that grown in containers only using cloth or compost, and their harvesting processes were easier. The growth and harvest easiness of mosses cultivated in compost were great rather than in bark or peatmoss. Compared to division, the spray of crushed mosses using mixer was effective for both gametophyte generation and their harvesting processes. In addition, the optimum inoculum for each container ($27{\times}17{\times}3cm$) was 2.0 g in B. rivulare and 4.0 g in M. maximowiczii. Overall growth of B. rivulare treated with nutrient solution (N:P:K=20:20:20) was inhibited compared to control, fresh-weight gain was reduced toward the higher concentration. But fresh-weight gain of M. maximowiczii was the highest with $0.25g{\cdot}L^{-1}$ treatment. Therefore, adequate moisture supply, after spraying crushed mosses (2.0 and 4.0 g each) in the compost covered with cloth, were the appropriate cultivation methods for B. rivulare and M. maximowiczii. Nutrient solution treatment with low concentration, during the cultivation period, would be the proper way only for M. maximowiczii.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.40-47
• /
• 2003

This study examined the improved effect of wear tolerance of warm-season turfgrass overseeded with cool-season turfgrasses. Also, it investigated the improved effect of crumb rubber on wear tolerance and the difference anmong cultivars regarding the wear of Zoysia spp. In wear experiment during summer, the warm-season turfgrass overseed with cool-season turfgrasses had a higher visual rating on the ground than the monostand of Cynodon dactylon. Moreover, in wear experiment in winter, barrenness showed significant progress in the monostand of C. dactylon, while the barrenness did not appear at all in overseeded turf with cool-season turfgrasses. As a result of investigating the bulk density was increased in the monostand of C. dactylon, but not in the overseed turf with cool-season turfgrasses. From the above result, the wear tolerance effcect of turfgrasses appeared year round through warm-season and cool-season turfgrass mixtures. Also, it was found that the method of topdressing crumb rubber on the ground was effective as a physical assistant device alleviating damage of turfgrasses. The possibility of improving wear tolerance was accepted by adding soil amendments such as perlite, pamis, etc., in order to promote the growth of turfgrass.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1635-1642
• /
• 2012

The identification of the dynamic properties of structural joints is important for predicting the dynamic behavior of assembled systems. However, the identification of the properties using analytical or experimental approaches is extremely difficult or even impossible. Several studies have proposed hybrid or synthesis methods that simultaneously used analytical and experimental approaches to identify the dynamic properties of a joint. However, among the many types of joints, only the bolt joint was treated as a practical example in these studies. In this study, for a simple assembly system comprising two plates and one hinge joint, a simple methodology involving the use of the static-based subpart analysis method to identify the dynamic properties is proposed. Finally, the proposed method is applied to a glove box in a passenger vehicle that includes hinge joints.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.374-379
• /
• 2016

On-line process monitoring schemes are designed to give early warnings of process faults. In the artificial intelligence and machine learning fields, reliable approaches have been utilized, such as kernel-based nonlinear techniques. This work presents a kernel-based empirical monitoring scheme with a small sample problem. The measurement data of normal operations are easy to collect, whereas special events or faults data are difficult to collect. In such situations, noise filtering techniques can be helpful in enhancing the process monitoring performance. This can be achieved by the preprocessing of raw process data and eliminating unwanted variations of data. In this work, the performance of several monitoring schemes was demonstrated using three-dimensional batch process data. The results showed that the monitoring performance was improved significantly in terms of the detection success rate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.275-280
• /
• 2008

A technique for reliability-based design optimization(RBDO) is developed based on the Bayesian approach, which can deal with the epistemic uncertainty arising due to the limited number of data. Until recently, the conventional REDO was implemented mostly by assuming the uncertainty as aleatory which means the statistical properties are completely known. In practice, however, this is not the case due to the insufficient data for estimating the statistical information, which makes the existing RBDO methods less useful. In this study, a Bayesian reliability is introduced to take account of the epistemic uncertainty, which is defined as the lower confidence bound of the probability distribution of the original reliability. In this case, the Bayesian reliability requires double loop of the conventional reliability analyses, which can be computationally expensive. Kriging based dimension reduction method(KDRM), which is a new efficient tool for the reliability analysis, is employed to this end. The proposed method is illustrated using a couple of numerical examples.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.103-115
• /
• 1969

A study has been made on the time of nitrogen top-dressing and the method of top-dressing to establish the higher yielding cultural method for wheat at Suwon. In this experiment, it was observed that the application of nitrogen top-dressing with urea leaf spray as spike fertilizer increased the yield by 4~6 percent over nitrogen top-dressing of equal quantity only. Considering the yield and various factors concerned, it is reasonable to apply top-dressing on mid and late of March in Suwon area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.918-922
• /
• 2008

본 연구에서의 측정 대상인 공주지점은 금강 본류로 홍수 예 경보 지점이며, 그 하상이 대부분 모래로 구성된 충적하천으로 간주된다. 유사량 측정은 강우가 집중되는 6$\sim$9월의 홍수기(25회)와 이를 기준으로 전 후시기인 저 평수기(2회)로 나누어 총 27회로 측정하였고 부유사량(D-74, P-61A: 수심적분법), 하상토(BM-54, 홍수기전 후 2회 채취), 수리량(수위, 유속, 측정수심, 수면폭, 수면경사, 수온)등의 실측자료를 이용하여 미측정구간의 유사량을 포함한 총유사량을 추정(실측+계산; Modified Einstein, 간접계산; Engelund & Hansen, Yang, Ackers & White)하였다. 이러한 분석결과를 가지고 유량-부유사농도와 부유사량 및 총유사량 관계에 대해 살펴보았다. 전체적으로 유량에 대한 측정성과들의 변위와 저유량시 산포도에 있어 다소 큰 경향을 보였고, 주요 강우사상별로 보았을 때 루프(Loop)현상을 볼 수 있었다. 이러한 분석결과의 상충은 하천의 수리, 유사특성과 추정방법의 적용한계 등의 서로 다른 제한된 범위의 자료들을 이용하여 분석하는 데서 오는 차이, 특히 유량, 수심, 하상토의 입경크기 등 자료의 범위가 추정공식들이 추천하는 범위에서 벗어났기 때문인데, 이는 총유사량 공식에 대한 범용성이 적다는 것을 의미한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.286-287
• /
• 2015

DGPS의 안정적인 운영 및 제공을 위해서는 중파대역 송출 전파의 안정성을 확보하여야 한다. 특히 대지 전도율의 변화에 따른 반사파의 변동은 안정적인 측위정보 제공 및 DGPS 기준국 운영에 영향을 미칠 수 있다. 본 논문은 반사파의 변동에 영향을 미치는 환경 변화 요인을 분석하고자 기준국 반사파의 변동과 기상인자의 상관성을 분석하였다. 도서 지역 DGPS 기준국의 반사파 변동과 기상인자와의 상관성을 분석하고자 시계열분석, 산포도 분석, 상관계수 산정 등의 방법을 이용하였다. 분석 결과 반사파 변동과 풍속, 습도는 양의 상관관계를 나타내었으며 기압과는 음의 상관관계가 나타났다. 이는 풍속과 습도가 높을수록 반사파가 크게 발생하며, 기압이 낮을수록 반사파가 낮게 나타나는 것을 의미한다. 송신 전파 특성상 기상의 변화가 반사파 변동에 직접적인 영향을 주지는 않으나 반사파가 생성되는 환경 요인에 영향을 끼치는 것으로 사료된다.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.311-322
• /
• 2007

Geovisual analytics is the new research area that looks fur the way to enable a truly synergetic work of human and visualization tool in analyzing spatio-temporal data. The research challenge for geovisual analytics is developing new geovisualization tools and enhancing human capabilities to analyse, envision, and reason a lot of spatio-temporal changes. With this research area, geovisual analytics is expected to be a new methodology for developing spatial decision support tools. This research is to integrate T scatter plot with computational method to classify the several patterns of the regional fright generation in Korea. The result of this work shows the capabilities provided by geovisual analytics to support spatial decision making.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1571-1574
• /
• 2012

소프트웨어 개발에 있어 각 단계별 프로세스 활동들에 대한 분석 및 평가는 소프트웨어의 품질을 좌우하는 큰 요인이다. 따라서 많은 소프트웨어 척도들이 소프트웨어 품질을 분석하는데 이용되고 있으며 유사 프로젝트를 통해 설정되는 기준치와 척도 값의 비교가 수행된다. 하지만 기존의 유사 프로젝트를 찾기란 쉽지 않은 일이며 유사 프로젝트를 찾더라도 해당 프로젝트의 개발 환경은 현재 개발 중인 프로젝트의 환경과 다른 경우가 많다. 따라서 본 논문에서는 외적인 기준치에 의존하지 않고 현재 개발 단계의 인스펙션 결과를 분석하는 방법을 제시하도록 한다. 산포도를 이용한 상대적 데이터 분석이 이용되며 국방 도메인에서 개발 중인 프로젝트 내부 31 개의 기능으로부터 수집된 데이터를 통한 사례분석을 수행하도록 한다. 이를 통해 기능들 간 현재 개발 과정의 일관성 유지 여부를 평가하고 다음 개발 단계의 프로세스 활동 강화 여부에 대한 권고 사항을 제시할 수 있다.