• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.287-292
• /
• 2022

In this paper, the stochastic distribution of the springback amount is investigated for the stamping process of a U-channel shaped-product with ultra-high strength steel. Using the reliability-based design optimization technique (RBDO), stochastic distribution of process parameters is considered in the analysis including material properties and process variation. Quantification of the springback scatters is carried out with the statistical analysis method according to the material strength. It is found that the scattering amount of springback decreases while the amount of springback increases as the tensile strength of the blank material increases, which is investigated by analyzing the strain and stress distribution of the punch and die shoulder. It is noted that the proposed scheme is capable of predicting and responding to the unavoidable scattering of springback in the sheet metal forming process.

• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.155-165
• /
• 1995

반복측정자료의 분석을 위해 제안된 Liang and Zeger(1986)의 회귀모형은 일반화추정식(generalized estimationg equations, GEE)을 이용하여 모형의 모수를 추정한다. 이 모형은 반복측정된 반응변수와 설명변수들과의 관계를 추정하는 것이 주된 목적이기 때문에 회귀모수는 중요한 모수로 간주되나 산포모수는 중요하지 않은 장애모수(nuisance parameters)로 간주된다. 일반적으로 GEE 분석에서 회귀모수의 추정량은 산포모수에 상관없이 일치적(consistent)으로 얻어진다고 알려져 있다. 그러나 본 논문에서는 포아송분포를 따르는 반복측정자료에 대한 사례연구와 모의 실험을 통해서 일반적으로 믿어져왔던 것과는 달리 GEE 방법이 산포모수에 민감하게 영향을 받고 있음을 보였다. 특히 산포모수의 값이 일정하지 않은 경우에는 GEE 방법이 산포모수에 민감 하게 영향을 받고 있음을 보였다. 특히 산포모수의 값이 일정하지 않은 경우에는 GEE 방법에서 밝혀진 회귀모수 추정량의 일치성에도 문제가 발생할 수 있음을 보였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.593-607
• /
• 2013

관리도를 사용하여 공정평균, 공정산포 등 여러 가지 공정모수를 관리할 수 있다. 그러나 공정모수의 미세 변동을 효과적으로 관리할 수 있는 기법체계는 아직 미완이다. 식스시그마 공정관리 등 정밀공정관리를 위해서는 미세 공정평균과 공정산포관리가 전제되어야한다. 특히 높은 수준의 공정능력을 유지하기위해서는 공정산포관리가 선결과제이다. 본 본문에서는 공정평균과 공정불량률, 공정산포의 미세변동을 효과적으로 관리할 수 있는 기술체계의 연구동향을 분석하고 미세공정산포관리를 위한 대안을 제시하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.2
• /
• pp.195-209
• /
• 1997

The joint modelling of mean and dispersion in quasi-likelihood models which greatly extend the scope of generalized linear models, is required in case that the dispersion parameter, the variance component of response variables, is not constant but changes by depending on any covariates. In this paper, by using statistical package GENSTAT(release 5.3.2, 1996) which makes a easily analyze real data through this joint modelling, we mention necessities that must consider this joint modelling rather than existing mean models through model checking based on graphic methods for esterase assay data introduced by Carrol and Ruppert(1987, pp.46-47), and then study methods finding reasonable joint model of mean and dispersion for this data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.523-526
• /
• 2004

미숙련 작업자들에 의하여 생산되는 라우드스피커의 특성들을 분석하여 제작된 제품들의 품질 신뢰도를 분석하였다. 동일한 부품을 사용한 경우임에도 조립 제작과정에서 누적된 미확인 제작오차에 의하여 발생하는 스피커의 전기 임피던스와 음향응답특성등의 산포도를 분석하였다. 또한, 전기 임피던스 곡선들로부터 T-S 매개변수 규명법으로 규명한 스피커 매개변수들의 산포도도 분석하였다. 부품들의 질량에 대한 실측치와 매개변수법으로 규명한 결과를 비교하여 조립제작과정에서 이 값들의 변화 되는 정도도 분석하였다.

• The KIPS Transactions:PartB
• /
• v.14B no.7
• /
• pp.549-558
• /
• 2007

Collaborative filtering systems have problems when users rate items and the rated results depend on their feelings, as there is a possibility that the results include noise. The method proposed in this paper optimizes the matrix by excluding irrelevant ratings as information for recommendations from a user-item matrix using dispersion. It reduces the noise that results from predicting preferences based on original user ratings by inflecting the information for items and users on the matrix. The method excludes the ratings values of the utmost limits using a percentile to supply the defects of coefficient of variance and composes a weighted user-item matrix by combining the user coefficient of variance with the median of ratings for items. Finally, the preferences of the active user are predicted based on the weighted matrix. A large database of user ratings for movies from the MovieLens recommender system is used, and the performance is evaluated. The proposed method is shown to outperform earlier methods significantly.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1011-1021
• /
• 2002

Fruit-discharge type of forty species of Asian Geranium were examined and their evolutionary trends and taxonomic system were discussed. Two main types of seed discharge in Geranium are made the basis of its divison into subgenera: Geranium subgenus Geranium, with a ballistic expulsion of the seed from mericarp, Geranium subgenus Robertium, with forcible discharge of the mericarp with the seed in it, separately from the awn. Variants of the seed ejecting type permit the division of Geranium subgenus Geranium into three sections. Section Ceranium, these has bristles at the base of the mericarp for prevent the seed from dropping from the divergent mericarp. Section Dissect, these has prongs at the base of the mericarp far prevent the seed from dropping from the divergent mericarp. Section Tuberosa, these has no bristles and prongs at the base of the mericarp, instead, retained of seed in pre-explosive interval by twist. Geranium subgenus Robertium was divided into two sections, Section Ruberta, with deeply wrinkled on the surface of mericarp at the time of discharge. Section Batrachioides, and section Trilopha, without wrinkle on the surface of mericarp at the time of discharge. According to the seed discharge, subgenus Geranium is thought to be more advanced than subgenus Robertium.

• Communications for Statistical Applications and Methods
• /
• v.18 no.5
• /
• pp.571-579
• /
• 2011

We propose a new bivariate zero-inflated negative binomial regression model to allow heterogeneous dispersions. To show the performance of our proposed model, Health Care data in Deb and Trivedi (1997) are used to compare it with the other bivariate zero-inflated negative binomial model proposed by Wang (2003) that has a common dispersion between the two response variables. This empirical study shows better results from the views of log-likelihood and AIC.

• Communications for Statistical Applications and Methods
• /
• v.18 no.2
• /
• pp.219-227
• /
• 2011

In this paper, we proposed a generalized bivariate negative binomial distribution allowing heterogeneous dispersions on two dependent variables based on a trivariate reduction technique. In this model, we propose the score and LR tests for testing the equality of dispersions and compare the efficiencies of the proposed tests using a Monte Carlo study. The Monte Carlo study shows that the proposed score and LR tests prove to be an efficient test for the equality of dispersions in the view of the significance level and power. However, the score test is easier to compute than the LR test and it shows a slightly better performance than the LR test from the Monte Carlo study, we suggest the use of score tests for testing the equality of dispersions on two dependent variables. In addition, an empirical example is provided to illustrate the results.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.585-594
• /
• 2010

This study, investigates the effects of dispersion parameters between two response variables in zero-truncated bivariate generalized Poisson distributions. A Monte Carlo study shows that the zero-truncated bivariate Poisson and negative binomial models fit poorly wherein the zero-truncated bivariate count data has heterogeneous dispersion parameters on dependent variables. In addition, we derive the score test for testing the equality of the dispersion parameters and compare its efficiency with the likelihood ratio test.