• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1607-1611
• /
• 2009

본 연구에서는 현재 가뭄을 관측하는데 주로 이용되는 가뭄지수의 단점 등을 보완하고자 가뭄에 관련되는 식생지수를 연계한 공간해상도 높은 가뭄지수를 제시하였다. 우리나라 지상관측을 통해 산출할 수 있는 PDSI(Palmer Drought Severity Index)와 SPI(Standardized Precipitation Index) 같은 가뭄지수는 기온과 강수량 등의 기후자료만을 이용하여 산정할 수 있다. 두 가뭄지수는 관측하기 어려운 가뭄의 시기와 심도를 설명하고자 여러 연구를 통해 개발한 지수이지만, 두 가뭄지수만을 가지고 우리나라 전역의 가뭄의 공간적인 분포를 설명하기에는 다소 무리가 있다. PDSI의 경우 강수량과 기온과 토양의 수분함유량을 가지고 산출하는데, 전 관측지점을 똑같은 토양수분함유량을 가지고 있다는 가정 하에 계산되고, SPI의 경우 강수량만을 이용하여 산정한다. PDSI의 경우 과거의 가뭄의 정도를 판단하는데 매우유용하다고 알려져 있다. 하지만, 현재의 가뭄정도를 나타내는 데는 문제를 가지고 있고, SPI의 경우는 누적강수량을 가지고 시간단위로 계산한다는 점에서 다양한 가뭄의 정도를 예측할 수 있지만, 입력 자료로 강수량만 들어간다는 점에서 약점을 가진다. 이런 기후지수만을 이용한 가뭄정보 생산이 공간정보를 구현하는데 한계를 가지는 문제점을 개선하고자 가뭄에 직간접적으로 관련이 있는 보다 세밀한 공간정보를 가진 식생, 토지이용, 고도 등의 자료와 기후정보로부터 산정된 가뭄지수간의 관계를 분석하였다. 나아가 기존의 기후지수보다 고해상도를 가진 위성의 정규식생지수(NDVI; Normalized Difference Vegetation Index)와 같은 식생지수를 이용하여 기존보다 더 향상된 해상도의 가뭄지수를 산정하고자 하였다. 우리나라 지상관측소 76개 지점 중에 MODIS(Moderate Resolution Imaging Spectroradiometer) 정규식생지수 자료와의 관계를 분석하고자 자료의 보유기간이 짧은 지점과 섬지점 등을 제외한 57개 지점을 선정하고, 연구기간동안의 강수량과 기온자료를 이용하여 PDSI와 SPI를 산출하였다. PDSI와 SPI자료를 고해상도 가뭄지수 산정의 기본 변수로 사용하기 위하여 역거리가중평균법을 이용한 연구기간동안의 한반도 지역 PDSI와 SPI 가뭄지수 지도를 생산하였다. 각각의 가뭄지수와 식생 상태를 나타내는 NDVI와의 상관특성과 계절 변화에 따른 변화특성을 분석하고, CART(Classification and Regression Trees) 알고리즘을 이용하여, 지상 자료만을 사용한 가뭄지수가 가지는 시공간적 변화 특성 제시에 대한 문제점을 개선한 보다 해상도가 높은 조합가뭄지수를 제시하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.99-105
• /
• 1983

In the Steering and Sailing Rules of International Regulations for Preventing Collicions at Sea, 1972, any relative distance between two vessels necessary for taking action to avoid collision in head-on situation is not referred. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for collision avoiding actions. Figuring out the values of maneuvering indices through experiments of actual ships, the author applied these values to the calculationg formulas and calculated the minimum safe relative distances. On the assumption that two vessels same in size and condition are approaching each other in head-on situation, the minimum safe relative distance was calculated as 5.0 times, sufficient safe relative one as 10.0 times their own length.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.3
• /
• pp.169-175
• /
• 2014

In this study, it is intended to provide a slip detector is an important function in the research on the slip control can be addressed uncontrollably path withdrawal might during driving of the power wheelchair, slip phenomenon occurs. By detecting and electric wheelchairs, the state of the motor during running, the detection of the slip, slip detection information calculated using an encoder that is connected to the left and right motor with six-axis IMU sensor for the electric wheelchair using an algorithm to calculate the slip ratio. Slip rate calculated in this way is used as control variable for improving the safety of the electric wheelchair. It was confirmed from the slip phenomenon of the path the proposed experiments slim detector proposed in this study. The maximum slip ratio detection zone during the experiment, can occur during turning of the electric wheelchair has been confirmed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.152-159
• /
• 2005

In this paper, we propose a diagnosis algorithm using fusion wかd based on PCA and LDA to detect fault states of the induction motor that is applied to various industrial fields. After yielding a feature vector from the current value measured by an experiment using PCA and LDA, training data is made to produce each matching value. In a diagnostic step, two matching values yielded by PCA and LDA are fused by probability model and finally verified. Since the proposed diagnosis algorithm takes only merits of PCA and LDA it shows excellent results under noisy environments. The simulation results to verify the usability of the proposed algorithm showed better performance than the case just using conventional PCA or LDA.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.1-40.1
• /
• 2009

미래 한국의 달궤도선 임무에 대비하여 달 근접 궤도 전파기인(orbit propagator) YSPLOP ver. 1(Yonsei Lunar Precise Orbit Propagator version 1)을 개발 하였다. 개발된 궤도 전파기의 성능은 상용 소프트웨어인 STK Astrogator를 이용하여 검증되었다. 개발된 궤도 전파기를 이용, 달 궤도선의 운용에 있어서 다양한 섭동력들이 궤도선의 수명(orbital decay)에 미치는 영향을 분석하였다. YSPLOP ver. 1은 정밀한 달 중심 탐사선의 위치산출을 위하여 M-EME2000 (Moon-Centered, Earth Mean Equator and Equinox of J2000) 좌표계, M-MME2000 (Moon-Centered, Moon Mean Equator and IAU vector of epoch J2000) 좌표계 그리고 M-MEPMD (Moon-Centered, Moon Mean Equator and Prime Meridian) 좌표계를 이용하여 탐사선의 상태(state) 정보를 산출한다. 또한 태양, 지구, 달, 화성, 목성의 중력에 의한 섭동력 및 태양풍에 의한 영향을 포함할 수 있도록 설계되었으며, 달 근접 궤도선의 궤도 운동에 가장 큰 영향을 미칠 수 있는 섭동력인 달의 비대칭 중력장에 의한 영향 또한 고려하도록 하였다. 달의 비대칭 중력장 모델 (Lunipotential model)은 LP165p 모델이 사용되었으며 행성의 정밀한 위치 산출을 위하여 JPL의 DE405 천체력이 사용되었다. 개발된 궤도 전파기를 이용, 달고도 100 km, 궤도 경사각 $90^{\circ}$인 달 중심의 극궤도를 약 30일 동안 전파한 결과, YSPLOP ver. 1의 성능은 STK Astrogator와 비교하여 보았을 때 약 수 m의 오차를 보이는 것으로 확인되었다. 달의 극궤도 탐사선의 궤도 수명을 분석한 결과, 최소한 달의 비대칭 중력장이 70 by 70 이상으로 고려되어야 함을 확인하였으며 이때 달 궤도선의 수명은 약 160일으로 나타났다. 아울러 달 근접 환경에서의 지구 중력에 의한 섭동력은 달 궤도선의 운동에 있어서 무시 할 수 없는 정도의 많은 영향을 끼치고 있음을 확인하였다. 이 연구를 통하여 개발된 궤도 전파기는 미래 한국의 달 궤도선 및 착륙선의 임무 설계시 사용 될 수 있다. 또한 이 연구에서 제시된 달 근접 환경에서의 다양한 섭동력들이 달 궤도선의 운동에 미치는 영향에 대한 해석 결과는 추후 달 근접 임무 설계시 고려되어야 하는 섭동력들의 기본 사양을 제공할 것이다.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.639-646
• /
• 2022

Occurrence of black opaque hydrocarbon (pyrobitumen) in some Cretaceous Jinju sandstones of the Sindong Group, Gyeongsang Basin in Korea is first reported in this study. The pyrobitumen is developed on chlorite pore-lining cement, or impregnated into the outer zone of chlorite cement. Therefore, it seems to have been formed after the precipitation of chlorite cement, indicating the former presence of crude oil. The liquid hydrocarbons migrated into sandstones during moderate burial and these sandstones seem to have acted as a liquid hydrocarbon reservoir. The presence of pyrobitumen in the Jinju Formation indicates that this formation underwent deep burial after liquid hydrocarbon migration. As reservoir temperatures increased further, hydrocarbons were cracked and a solid pyrobitumen residue remained in the reservoir.

• The Journal of Engineering Geology
• /
• v.32 no.2
• /
• pp.295-310
• /
• 2022

The Weolaksan and Sokrisan granites yield high SiO₂ and alkali (Na₂O+K₂O) contents and low CaO and P₂O₅ contents. The Al saturation index is ≥1.3, which indicates that the granites are peraluminous. The mean U and Th contents are 8.3 and 39.3 ppm, respectively, higher than typical Mesozoic granites in South Korea and about twice the global mean for granitic rocks. The causes of such high radioelement contents are related to high degrees of fractionation and the crustal origin of the granites. U- and Thbearing radioactive minerals occur in the granites include zircon, thorite, monazite, xenotime, fergusonite and uraninite. The fact that the mean Th/U ratio of the granites (5.4) is similar to the global average crustal value suggests that the radioelement contents of granite were controlled by the crustal source material. Given the correlation of Zr, Y, and heavy rare earth elements for U and Th, radioelements are more likely hosted by xenotime than zircon and monazite.

• Journal of the Korean earth science society
• /
• v.41 no.2
• /
• pp.129-136
• /
• 2020

Drought is an environmental disaster typically defined as an unusual deficiency of water supply over an extended period. Satellite remote sensing provides an alternative approach to monitoring drought over large areas. In this study, we monitored drought patterns over about 30 years (1985-2015), using satellite imagery of Lake Soyang, Gangwondo, South Korea. Landsat images were classified using ISODATA, maximum likelihood analysis, and an artificial neural network to derive the lake area. In addition, the relationship between areas of Lake Soyang and the Standardized Precipitation Index (SPI) was analyzed. The results showed that the artificial neural network was a better method for determining the area of the lake. Based on the relationship between the SPI value and changes in area, the R² value was 0.52. This means that the area of the lake varied depending on SPI value. This study was able to detect and monitor drought conditions in the Lake Soyang area. The results of this study are used in the development of a regional drought monitoring program.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.339-355
• /
• 2004

Locality of domestic high-Ca limestones can be divided into three districts, i.e., (1) the Jecheon-Danyang area, (2) the Samcheok-Taebaek-Jungsun area, and (3) the Uljin-Andong area, in accordance with their geologic background and type of the deposits. Except for some crystalline limestones from the Jecheon-Danyang area, domestic high-Ca limestones were mostly recrystallized and Ca-enriched by the effects of hydrothermal alteration and/or thermal metamorphism. The lime-stones can be also divided into crystalline limestone type, marble type, micro- and mega-crystalline calcite types on the basis of their composition, crystallinity, and mineral facies. An applied-mineralogical characterization of the high-Ca limestones was done through the systematic analyses and tests for the limestones. The high-Ca limestones from the area (1), which are megascopic ally close to the original limestone in lithology, display lower whiteness, higher contents of CaO (51 ～ 54 wt.%), low crystallinity, and fine-grained texture. Two typical hydrothermal types of the high-Ca limestones from the area (2), i.e., micro- (mostly 0.2～0.3 mm) and mega-crystalline (2～15 em) calcite types, have comparatively higher whiteness and rather variable CaO contents (50～55 wt.%) with exhibiting quite different crystallinity each other. The micro-crystalline calcite type is especially dominant in this area, and has comparatively uniform crystallinity and homogeneous composition. Compared to these limestones, the high-Ca limestones from the area (3) show remarkable differences in grade and quality according to their types of deposit and occurrence. Based on these mineral characters and chemical composition, a possible scheme for industrial uses of the domestic high-Ca limestones was suggested.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.89-99
• /
• 1998

The gold-silver mineralizations in Korea are closely related to Jurassic Daebo igneous activity (121 and 183 Ma) and Cretaceous Bulgugsa igneous activity (60 and 110 Ma). A compilation and re-evaluation of chemical data in arsenopyrite suggest that the As contents vary, reflecting different genetic environments or mineral assemblages. The gold-silver vein deposits from various mineralized area were investigated using arsenopyrite geothermometer. Arsenopyrites from the Jurassic Au-dominant deposits are distinct by high As contents (29.68~33.46 atomic %) with narrow variations, equivalent to a temperature range of $370{\sim}450^{\circ}C$ and a sulfur fugacity of about $10^{18}-10^{-6}$ atm. On the contrary, arsenopyrites from the Cretaceous Au-Ag and Ag-dominant deposits show a wider range in atomic % As composition of 27.47-32.74. They may have formed at temperatures of $250{\sim}350^{\circ}C$ and about $f_{S_2}=10^{-12}-10^{-10}$ atm. The data of arsenopyrite geothermometer, electrum-sphalerite geothermometer, fluid inclusions, vein morphology and emplacement depth of igneous rocks indicate that the gold mineralizations of Group IIA occurred at temperatures between 300 and $500^{\circ}C$ at depth of several tens km or more (about 4-5 kbar), and the gold-silver deposits of Groups III, IV and V were formed at a temperature range of about $170{\sim}370^{\circ}C$ under the shallow environment (<1 kbar).