• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.176.2-176.2
• /
• 2011

피마자유(Castor oil)는 합성수지, 그리스, 유압용 오일, 윤활기유 등의 다양한 용도로 쓰이는 오일로서 점도가 높고 무색에서 황갈색을 띈다. 피마자유 추출은 압착 착유 또는 용매 추출로 얻게 되며 본 실험에 사용된 오일은 압착 착유한 것으로 매우 진한 갈색을 띄는 정제전 오일을 이용하였다. 실험에 사용된 피마자유의 초기 산가는 1mgKOH/g 이하로 낮은 유리지방산 함량을 보였으며 수분은 0.3%로 전이에스테르화 반응을 위해서는 수분 증발이 필요했다. 피마자유의 바이오디젤 생산을 위해 진행된 물성 분석 항목은 산가, 수분, 인함량, 황함량, 점도, 고형물이며 원료유와 그 바이오디젤에 대해 각각 물성 분석을 실시하였다. 피마자유의 가장 큰 특징은 다른 식물성 오일과는 다르게 오일이 알코올에 녹는 특성이 있으며 이런 이유로 전이에스테르화 반응 후 바이오디젤과 글리세롤이 분리되지 않는 문제점을 갖고 있다. 피마자유를 이용해 제조한 바이오디젤, 즉 지방산메틸에스터의 함량을 분석한 결과 약 90%의 메틸에스터화 반응 전환율을 나타내었으나 국내외 품질규격상의 탄소수 C14~C24:0의 지방산 에스터(fatty acid methyl esters)로 검출되는 바이오디젤의 함량은 10% 미만으로 나타났으며 나머지 90%는 라이신올레익산메틸에스터(ricinoleic acid methyl ester)로 분석되었다. 따라서, 기존의 대두유, 유채유, 팜유, 폐식용유로부터 제조한 바이오디젤과 물성이 매우 상이하고 특히 끊는점(boiling point)과 점도가 높아 경유 대체연료로는 활용이 불가능할 것으로 판단된다. 하지만 기존의 다양한 용도의 오일로 사용하기 위해 정제하는 과정에서 전체 착유 오일중의 약 10%만을 선택적으로 분리하여 바이오디젤 원료로 활용하는 방안은 가능할 것으로 판단된다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.88-88
• /
• 2001

최근 들어 초지기의 고속화, 원료의 저급화, 가공작업의 온라인화에 따라 초지기 상에서 안 정된 조업성이 더욱 중요하게 부각되고 있다. 이러한 초지 시스랩의 변화에 따라 사이징 효과의 발현 속도에 대한 관심이 고조되고 있다. 중성 사이징 시스템으로 ASA를 적용할 경우에는 초지기상에서 사이즈도의 대부분이 발현되기 때문에 온라인 후가공 작업의 안정성이 향상되며 사이즈프레스에서 조업성 역시 개선될 수 있을 것으로 기대된다. 본 연구에서는 가격이 저렴하고 국내 수급이 용이한 옥수수 양성전분을 ASA 유화안정제로 이용하기 위해서 OSA (Octenyl Succinic Anhydride)를 이용한 에스테르화 및 산가수분해를 통하 여 ASA 에멀션의 안정성 및 사이징 효과를 개선시킨 전분을 개발하고 그 효과를 규명하고자 하였 다. 이를 위해 전분을 FT-IR을 이용하여 분석하고 호액의 pH, 전기전도도, 전하밀도, 점도 변화 등 을 측정하였을 뿐 아니라 ASA 유화액의 pH, 전기전도도, 시간에 따른 가수분해 안정성 등을 평가 하였다. 또한 ASA 에멀션의 입도 변화 섬유에 대한 흡착특성과 수초지의 사이즈도를 평가하였다. 그 결과는 다음과 같았다. 첫째,OSA 전분의 사용에 따라 전분 호화액의 pH와 전기전도도의 변화는 나타나지 않았 다. 전하밀도는 첨가량이 증가할수록 감소하였으며 호화액의 점도는 상숭하였다. 또 OSA 전분의 적 용이 수초지의 사이즈도에는 영향을 주지 않았다. 그러나 OSA 전분을 사용하여 제조된 ASA 유화 액의 가수분해 안정성은 향상되었다. 이것은 콜로이드 상의 ASA 입자를 캡슐화 하는데 있어 소수성 을 띠고 있는 OSA 전분이 보다 강하고 안정하게 흡착하기 때문인 것으로 판단되었다. 둘째, 전분의 호화 시 H2S04을 사용하여 전분의 산 가수분해를 유도할 수 있었다. 이를 통 하여 전분 호화액의 pH는 낮아지고 전기전도도는 증가하였으나 전하밀도의 변화는 없었다. 또한 겔 화 온도가 낮아지고 저온에서의 점도가 상승하는 변화를 나타냈다. IN-H2S04를 2.3%까지 첨가하였 을 때 ASA 에멀션의 입도가 더욱 감소하였고 섬유에 대한 흡착량이 증가하였으며 수초지의 사이즈 도가 향상되었다. 특히 기존에 사용되어 오던 감자 양성전분에 비해 최대 90%까지 사이즈도의 향상 이 있었다.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.470-476
• /
• 1992

The curd yogurt was prepared from milk added with skim milk powder or three Tongil rices of different storage period. The effect of storage period of rice on acid production by lactic acid bacteria in milk containing rice of 2%(w/v) was investigated. The effect of storage period of rice on quality of curd yogurt(sensory property, viscosity and keeping quality) was also examined. Addition of rice stimulated acid production by lactic acid bacteria more than control(milk yogurt). Storage period of rice did not significantly affect acid production by lactic acid bacteria though stimulating effect of rice on acid production was slightly different among species. Sensory property of curd yogurt added with rice was not significantly affected by storage period of rice. Apparent viscosity of curd yogurt added with rice increased in proportion to storage period of rice. Curd yogurt showed characteristics of thixotropic flow. When curd yogurt added with rice was kept at $5^{\circ}C$ for 15 days, its keeping quality was relatively good and was not markedly affected by storage period of rice.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.329-333
• /
• 1997

Rheological properties of partially purified fucoidans of Laminaria religiosa, sporophylls of Undaria pinnatifida, Hizikia fusiforme, and Sargassum fulvellum in Korea were investigated, The fucoidans produced aqueous solutions of low apparent viscosity with pseudoplastic flow behavior. The viscosity of $5\%$ solution of the fucoidan from sporophylls of U. pinnatifida was 2.2 mPa.s. The activaton energies of L. religiosa, sporophylls of U. pinnatifida, H. fusiforme and S. fulvellum were $8.269\times10^6,\;7.498\times10^6,\;7.141\times10^6,\;and\;6.677\times10^6\;J/Kg.mol$ at 1,500 1/s of shear rate, respectively. The viscosity of the fucoidan solution was increased by the addition of sugar, but that was not changed by addition of NaCl.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.346-352
• /
• 2015

Polyalphaolefin (PAO) is a synthetic lubricant that is superior to mineral-based lubricants in the terms of physical and chemical characteristics such as low pour point, high viscosity index (VI), and thermal and oxidation stability. Several kinds of PAOs have been synthesized by using 1-pentene, 1-hexene, 1-octene, or 1-dodecene as monomer with three kinds of aluminum-based Lewis acid catalysts via cationic polymerization. The control of the catalytic performance and physical properties of PAO such like molecular weight, kinematic viscosity, pour point, and viscosity index was done by changing polymerization parameters. The alkyl aluminum halide-based catalysts show better catalytic activity than that of the conventional $AlCl_3$ catalyst. The microstructure of PAO was investigated by means of TOF-MS (time of flightmass spectroscopy) analysis in order to elucidate the correlation between the performances of the lubricant (VI, pour point) and the molecular structure of PAO. The VI of PAO increases with increases in the carbon number of ${\alpha}$-olefin. In other words, the performances of PAO as a lubricant strongly depended on the branch length of PAO.

• Applied Biological Chemistry
• /
• v.38 no.3
• /
• pp.191-195
• /
• 1995

Production of a high viscosity exoploysaccharide, methylan, by Methylobacterium organophilum from methanol was carried out in fed-batch cultures and the rheological properties of methylan fermentation broth were studied. Bacterial biomass showed little influence on viscosity, but the accumulation of methylan caused the increase of viscosity. With proceeding fermention, the viscosity at the same concentration of methylan was significantly increased and methylan solution showed slightly higher pseudoplasticity. The composition changes of methylan were investigated at various fermentation times. Contents of total sugar, reducing sugar and methylan were decreased but contents of acids(pyruvic acid, uronic acid and acetic acid) were increased with the culture time. It was considered that the increased content of acids resulted in the increase of the hyrodynamic domain in the solution due to charge repulsion. Consequently, the solution viscosity increased in propotion to the acids contents of methylan. Cell growth and methylan production were severely decreased by the limitation of dissolved oxygen. However, the cellular activity for methylan production was almost constant regardless of the level of dissolved oxygen. As a result, the high speed of agitation increased the methylan production, the specific production rate of methylan, and the methylan yield of the cell.

• Food Science of Animal Resources
• /
• v.23 no.3
• /
• pp.250-261
• /
• 2003

This experiment was carried out to examine the fermentation properties of yogurt with Lycii fructus, Lycii folium and Lycii cortex powder, and extract additives at concentrations of 0.5, 1.0, 2.0, 4.0, and 6.0%. Lactic acid bacteria was used in a mixed starter culture of Streptococcus salivarius ssp. thermophilus(ST36) and Lactobacillus delbrueckii ssp. bulgaricus(LB12). When the boxthorn was added with extract types, the changes of pH, acidity and lactic acid bacteria counts of yogurt during the fermenation of 3 hours were pH 5.64, titratable acidity 0.85%, 5.80xl0$\^$6/cfu/ml of viable cell counts for control yogurt, whereas those were pH 4.10∼5.06, titratable acidity 0.98∼1.27%, 1.80∼9.60x10$\^$7/ cfu/ml of viable cell counts for Lycii fructus extract yogurt. The lactose hydrolysis ratio was better for 1.0% Lycii fructus extract yogurt(42.00%) and 1.0% Lycii folium extract yogurt(41.46%) than for control yogurt(28.40%). Also, content of lactic acid of 1.0% Lycii fructus(11.9 times) and 1.0% Lycii folium extract yogurt(10.6 times) produced more than control yogurt(7.3 times). The viscosity of yogurt was better for boxthorn extract yogurt(1,027∼1,382 cps) than for control yogurt(975cps). The sensory scores of color, taste and overall acceptability of yogurt with 0.5, and 1.0% Lycii fructus extract additive were better than other groups. The yogurts made with increased Lycii fructus extract concentration(0.5∼6.0%), showed the increase of lactic acid, titratable acidity, number of lactic acid bacteria, viscosity and lactose hydrolysis rate compared to the treatments of 0.5, 1.0, 2.0, and 4.0% Lycii folium and Lycii cortex extract and powder yogurt. We gained excellent results from the yogurt to which Lycii fructus extract was added with 0.51.0% concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.31-42
• /
• 2001

In this study, we obtained fundamental data about Korean raw lacquer's physical and chemical properties to produce high quality lacquer. The tested raw lacquers were obtained from Won-ju in Korea, Shanxishang, Guizhoushang, Anhuishang in China. The drying time of refining lacquers, tensile strengths of dried films and uniformity of films are measured. The refined lacquers were prepared by experimentally scaled refining equipment. Films of lacquer were applied on glasses by film applicator. This films were tested by universal strength test machine. The films were pictured by scanning electron microscopy and confocal microscopy to define the uniformity of them. The refining method were not different among three different kind of raw lacquers which were different their collecting time and places. But the viscosity of them were quite different. When black refined lacquer is made with iron powder, the adding time of iron powder is critical to control the viscosity of it. The refining times, viscosity and tensile strength of refined lacquers were not depended the method of refining condition but the place of collecting of raw lacquer.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.750-753
• /
• 2003

A method for the mass production was designed by using a screw pumping system that can supply safe bifidobacteria. To prevent the inhibition of cell activity, various additives, which are able to preserve pore of an alginate bead, were used. When materials are sterilized, viscosity decreased below 300cp. Adding bifidobacteria, viscosity increased to 300cp. We manufactured various extrusion nozzles and tested mass productivity of the alginate bead. As a result, 18G, 4mm length sylinge with 13 multi-nozzle showed the best productivity which was about $308{\pm}3ea/min$.

• Korean Journal of Food Science and Technology
• /
• v.9 no.3
• /
• pp.194-198
• /
• 1977

A seaweed Ecklonia cava from Jeju island was irradiated with $0.1{\sim}6\;Mrad$ of gamma-rays and the yield and viscosity characteristics of alginates from it were examined. Irradiation below 1 Mrad dose brought about a 70% increase in the yield while higher doses caused slight decreases. Viscosity behavior of alginates below 0.5 Mrad dose was not altered while the viscosity decreased markedly above 1 Mrad dose, likely due to the depolymerization.