• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.77-89
• /
• 1983

Properties and frying performance of domestic rice bran oil were studied. For this purpose, the analyses on the following characteristics were performed and their comparison with the characteristics of soybean oil was made: fatty acid composition, glycerides, composition, acid value, specific gravity, color, petroleum ether insoluble oxidized fatty acid, viscosity, smoke point, foam test, and water solubility. The results were as follow: 1) Fatty acid composition of domestic rice bran oil by gas chromatography was same as perviously reported, and similar to the fatty acid composition of the rice bran oil in foreign countries. Also the glyceride composition of domestic rice bran oil was analyzed by the methods of TLC, column chromatography, and high performance liquid chromatography. The results were monoglyceride ranged from one to four percent; diglyceride 30-30% and triglyceride 66-80%. Consequently, the composition was proven completely different from that of the other edible oils. 2) The high contents of mono-glyceride in rice bran oil resulted in high values of specific gravity and water-solubility respectively. However, high contents mono glyceride and diglyceride indicated little affection to changes of acid value, color, petroleum ether insoluble oxidized fatty acid, and smoke point on frying. 3) Because of low contents of linoleic acid, domestic rice bran oil was estimated stable on frying, whereas soybean oil was easily polymerized. 4) A serious foaming and low smoke point on Frying in domestic rice bran oil were caused by its impurities. It seems that monoglyceride and diglyceride had little relation with foaming and smoke point. 5) Oils with serious foaming and low smoke point on frying caused a substantial quality loss in terms of flavor and appearance of fried materials.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.87-92
• /
• 2000

This study was performed to provide scientific information for consumers and to increase the quality and consumption of Sullungtang prepared with bone from Hanwoo. The physico-chemical, sensory, nutritional properties of Sullungtang by different parity were investigated. The extracting extents of blood were significantly higher for heifer among Hanwoo cows with different parity(none, the second or the fourth) and for back bones among different bone portions (round, hind shank, arm, fore shank or back bone) (p〈0.05). For Sullungtang extracted from bones of heifer was higher in collagen contents than those extracted from cows with the second or the fourth parity. Sullungtang extracted from bones of heifer and cows with the second parity had significantly higher contents of condroitin and viscosity than those of cows with the fourth parity, however there was no significant difference between heifer and cows with the second parity. In color, L values were significantly high, and a and b values were significantly low for Sullungtang extracted from bones of heifer when compared to those extracted from the other cows with the second parity. The contents of total nitrogen, sodium, or calcium were higher for Sullungtang extracted from heifer than those from the cows with the second or the fourth parity. In amino acid compositions, the percentages of glycine were highest and proline and glutamic acid were followed fro all Sullungtang samples from Hanwoo. The results showed that the overall quality of Sullungtang significantly decreased as the parity increased for Hanwoo cows. The Sullungtang extracted from bones of heifer had the best sensory scores as well as nutritional quality when compared to those extracted from the cows with parity. Therefore, the labeling and price for cow bones should be differently evaluated by their parity and age in marketing system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1082-1090
• /
• 2005

Jocheong was prepared by adding Lentinus edodes extract to improve its quality and to give some functional properties. Contents of crude protein, ash and crude lipid were similar to those of control, while carbohydrate content was decreased. Total mineral content were $1,916.03\~2,674.24mg/kg$ that was no difference between test samples. From HPLC determination of free sugars, Jocheong was found to contain maltose as the highest sugar, followed by glucose and fructose. In amino acid analysis, seventeen amino acid were identified and quantified. Glutamic acid in Jocheong was major amino acid. The major fatty acids in Jocheong $(0\%,\;control)$ were linoleic acid, palmitic acid, oleic acid, myristic acid and caproic acid. There was no significant differences in fatty acid composition, pH and reducing sugar content among the Jocheong samples. The viscosity and solid contents tended to decrease with the addition of Lentinus edodes extract. Increasing the ratio of mushroom extract in Jocheong tended to decrease the lightness, yellowness and redness in Hunter's color value. Although sensory value decreased with increasing Lentinus edodes extracts, use of mushroom extracts (7: 3; saccharification liquids: Lentinus edodes extracts) is recommended for making Jocheong.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.60-67
• /
• 2009

The purpose of this research was to develop the apple dressing sauce added pine mushroom (Tricholoma matsutake Sing.) and chitosan which has excellent functionality and scent. An apple dressing sauce with pine added to it was manufactured and tested for sensuality and also for quality changes during storage. The sensory test of the sauces added pine mushroom, the apple dressing sauce added pine mushroom and the apple dressing added pine mushroom and chitosan scored high points. The chromaticity of the apple dressing sauce with pine mushroom compared to the pine didn't show much difference in the L, a, b values and also in the sauces added pine and chitosan, the apple dressing showed less change. At $4^{\circ}C$ and 25, the viscosity of the sauces with pine mushroom showed a small increase in all samples as the storage duration went on. At $4^{\circ}C$, a continuous decrease of the pH was seen in all of the apple dressing sauce added with pine mushroom on storages and from 30 days the pH seemed to start increasing slightly. During storage, the titratable acidity in all samples of the apple dressing with pine mushroom at $4^{\circ}C$ and $25^{\cird}C$ seemed to some what increase as the term went on but there was no significant differences to the acidity. At $4^{\circ}C$, the total viable cells in the apple dressing with pine mushroom showed $1.7{\times}10^{2}CFU/g$ which was the lowest in the beginning of storage period but as the storage period grew longer the total viable cells increased in all of the samples.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.768-775
• /
• 2005

Lentinus edodes powder was added at 1-3%(w/w) to improve functional properties of jocheong. Content of crude protein, ash, crude lipids, total mineral, free sugar and reducing sugar increased with increasing amount of L. edodes powder, while viscosity and solid and carbohydrate contents decreased. Through amino acid analysis, 17 amino acids were identified and quantified, glutamic acid being the major amino acid. No significant differences were observed in fatty acid composition and pH between control and L. edodes powder-added jocheong. Addition of mushroom powder in jocheong decreased lightness, yellowness and redness in Hunter's color value. Sensor score of jucheong containing 1% of L. edodes powder was similar to that of control. Results showed jocheong containing less than 2% L. edodes powder gave highest scores in quality characteristics and sensory evaluation.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.985-994
• /
• 2018

Bio-heavy oil for power generation is a product made by mixing animal fat, vegetable oil and fatty acid methyl ester or its residues and is being used as steam heavy fuel(B-C) for power generation in Korea. However, if the fuel supply system of the fuel pump, the flow pump, the injector, etc., which is transferred to the boiler of the generator due to the composition of the raw material of the bio-heavy oi, causes abrasive wear, it can cause serious damage. Therefore, this study evaluates the fuel characteristics and lubricity properties of various raw materials of bio-heavy oil for power generation, and suggests fuel composition of biofuel for power generation to reduce frictional wear of generator. The average value of lubricity (HFRR abrasion) for bio-heavy oil feedstocks for power generation is $137{\mu}m$, and it varies from $60{\mu}m$ to $214{\mu}m$ depending on the raw materials. The order of lubricity is Oleo pitch> BD pitch> CNSL> Animal fat> RBDPO> PAO> Dark oil> Food waste oil. The average lubricity for the five bio-heavy oil samples is $151{\mu}m$ and the distribution is $101{\mu}m$ to $185{\mu}m$. The order of lubricity is Fuel 1> Fuel 3> Fuel 4> Fuel 2> Fuel 5. Bio-heavy oil samples (average $151{\mu}m$) show lower lubricity than heavy oil C ($128{\mu}m$). It is believed that bio-heavy oil for power generation is composed of fatty acid material, which is lower in paraffin and aromatics content than heavy oil(B-C) and has a low viscosity and high acid value, resulting in inhibition of the formation of lubricating film by acidic component. Therefore, in order to reduce friction and abrasion, it is expected to increase the lubrication of fuel when it contains more than 60% Oleo pitch and BD pitch as raw materials of bio-heavy oil for power generation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.55-64
• /
• 2022

The potassium cream soap with fatty acid called cleaning foam has a crystal gel structure, and unlike an emulsion system, it is weak to shear stress and shows characteristics that are easily separated under high temperature storage conditions. The crystal gel structure of cleansing foams is significantly influenced by the nature and proportion of fatty acids, degree of neutralization, and the nature and proportion of polyols. In order to investigate the effect of these parameters on the crystal gel structure, a ternary system consisting of water/KOH/fatty acid was investigated in this study. The investigation of differential scanning calorimeter (DSC) revealed that the eutectic point was found at the ratio of myristic acid (MA) : stearic acid (SA) = 3 : 1 and ternary systems were the most stable at the eutectic point. However, the increase in fatty acid content had little effect on stability. On the basis of viscosity and polarized optical microscopy (POM) measurements, the optimum degree of neutralization was found to be about 75%. The system was stable when the melting point (T_m) of the ternary system was higher than the storage temperature and the crystal phase was transferred to lamellar gel phase, but the increase in fatty acid content had little effect on stability. The addition of polyols to the ternary system played an important role in changing the T_m and causing phase transition. The structure of the cleansing foams were confirmed through cryogenic scanning electron microscope (Cryo-SEM), small and wide angle X-ray scattering (SAXS and WAXS) analysis. Since butylene glycol (BG), propylene glycol (PG), and dipropylene glycol (DPG) lowered the T_m and hindered the lamellar gel formation, they were unsuitable for the formation of stable cleansing foam. In contrast, glycerin, PEG-400, and sorbitol increased the T_m, and facilitated the formation of lamellar gel phase, which led to a stable ternary system. Glycerin was found to be the most optimal agent to prepare a cleansing foam with enhanced stability.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.1
• /
• pp.67-82
• /
• 2008

This study was performed to investigate changes in benthic environment and macrobenthic polychaete communities in Gamak Bay where various environmental quality improvement projects have been implemented in recent years. Field surveys were carried out in February, 2005 and February, 2006 and twenty stations were selected to explore whether or not there were between-year differences in biotic and abiotic variables. Of 10 environmental variables measured, only three variables including dissolved oxygen (DO), total ignition loss (IL), acid volatile sulfide (AVS) showed significant between-year differences. Specifically, IL and AVS were, on average, 1.5 and 3 times lower in 2006 compared to those in 2005, respectively, which was more pronounced in the northern part of the bay. A total of 95 polychaete species was sampled from the two sampling occasions. Between-year differences in the number of species, abundance, and diversity were varied from place to place. In the northern part of the bay, fewer species were found in 2006 rather than in 2005, but diversity increased in 2006 due to the reduction in dominance of a few species. On the contrary, in the central part of the bay, the number of species, abundance and diversity prominently increased in 2006. In the southern part of the bay, all the biological indices maintained similarly during the two years. Dominant species in 2005 were such opportunistic or organic pollution indicator species as Lumbrineris longifolia, Capitella capitata, Mediomastus californiensis, Pseudopolydora paucibranchiata, etc. and most of them were mainly distributed in the northern part of the bay and in the proximity of it. In 2006, however, Euchone alicaudata, L. longifolia, Paraprionospio pinnata, Flabelligeridae sp., etc. were dominant and distributed mainly in the central part of the bay. Multivariate analyses showed that the whole polychaete community could be divided into 5 groups reflecting the geographical positions of the sampling stations and temporal variation particularly in the northern part of the bay. According to the results of BIO-ENV procedure, TOC (${\rho}=0.52$) and AVS (${\rho}=0.49$) as a single variable best explained the polychaete community structure. The best combination was made by such variables as TOC, AVS, sorting coefficient, and water temperature (${\rho}=0.60$). In conclusion, between-year differences in biotic and abiotic variables imply that recent efforts for the environmental improvement produced positive influences on the benthic environment of Gamak Bay, particularly the northern part of the bay.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1977

The purpose of this study is to complish a method of fish glue malting with residual products such as fish head and skin discarded from sea food processing. Using the skins of Alaska pollack and file fish from fillet packers, the optimum conditions of skin glue processing were investigated and physical and chemical properties of the product were also determined. The yields of Alaska pollack, Thelagra calcogramma, skin and file fish, Novodon modestus, skin to the total body weight were $4.6\%\;and\;5.0\%$ respectively. The optimum conditions for a $49.3\%$n yield Alaska pollack skin glue processing were considered the extraction of previously tinted in $0.1\%$ calcium hydroxide solution for 3 hours with the additional water as much as 3 times of sample weight at $70^{\circ}C$ for 3 hours under the controlled pH 5.0. The conditions for file fish skin glue were similar to those of Alaska pollack except the addition of five times of water to the weight of sample skin needed for extraction. The content of crude protein of Alaska pollack and file fish skin glue were $98.0\%\;and\;96.0\%$ respectively. The contents of crude ash and crude lipid were not different from that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of Alaska pollack skin glue marked 5.84, $21.8^{\circ}C,\;7.1^{\circ}C\;and\;10.0g$ respectively and those of file fish skin glue showed $5.79,\;25.0^{\circ}C,\;7.4^{\circ}C\;and\;11.6g$ respectively.The color and turbidity of Alaska pollack skin glue are slightly superior to those of file fish skin glue. It is supposed that the extract residue of skin glue is valuable for use the animal feeds by the results of amino acid composition. And the ratio of each amino acid content to the total amino acid of Alaska pollack and file fish skin glue is similar to that of chemical grade gelatin.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.1
• /
• pp.53-61
• /
• 2014

In this study, we investigated the production process and the chemical composition of saccharogenic mixed grain beverages (SMGBs). Various SMGBs were prepared through saccharification with Aspergillus (A.) oryzae CF1003 (A), A. acidus KACC46420 (B), Rhizopus (R.) delemar KACC46149 (C), R. oryzae KACC45714 (D), R. oryzae KACC46148 (E), A~E mixed strains (F), A. oryzae CF1001 (G), A. acidus CF1005 (H) and A+H mixed strains (I)-starter at $53^{\circ}C$ for 24 hours. The saccharogenic power of the strains was higher in samples F and G. The soluble solid ($^{\circ}Brix$) of SMGBs were the highest in Sample C. The moisture, crude protein, crude lipid, and crude ash content of various SMGBs showed a range of 77.9~80.7%, 3.7~7.5%, 0.37~0.97% and 1.81~7.47%, respectively. The viscosity of various SMGBs were in the range of 60~528. Further, free amino acid contents of SMGBs were in the range of 347~1,352 ${\mu}g/$ 100 g, respectively. From these results, we could secure the possibility and basic information for the development of SMGBs products. For future studies, we need to improve the taste and functionality of the products.