• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.281-283
• /
• 2016

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.92-93
• /
• 2022

As the importance of smart factories is emphasized, the use of industrial Ethernet-based devices is expected to increase to build smart factories. PROFINET is an industrial Ethernet protocol developed by SIEMENS, and a number of smart factories are currently being built as PROFINET-based products. Accordingly, in order to develop and utilize various industrial IoT-based services, an IIoT device capable of collecting various sensor data and information from PROFINET-based manufacturing equipment and transmitting data to an edge computer is required.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.159-164
• /
• 2013

Recently the solution integrated of vision and motion controller which are important element in automatiomn system has been many developed. However typically such a solutions has a many case that integrated vision processing and motion control into network or organized two chip solution on one module. We implement one chip solution integrated into vision and motion controller using Zynq-7000 that is developed recently as extended processing platform. We also apply EtherCAT to motion control that is industrial Ethernet protocol which have compatibility for open standardization Ethernet in order to control of motion because EtherCAT has a secure to realtime control and can treat massive data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.429-434
• /
• 2007

프로세스의 우선순위는 임베디드 시스템에서 수행되는 여러 가지 작업들의 중요도 또는 작업마감 시간의 임박성에 따라 결정되기 때문에 프로세스의 입출력 작업 시에도 반영되어야 한다. 하지만 많은 임베디드 운영체제들은 기존의 범용 운영체제를 기반으로 설계되었기 때문에 입출력 작업 시 프로세스의 운선순위를 반영하지 못하고 있다. 본 논문에서는 이러한 문제를 해결하기 위해서 새로운 통신 프로토콜 스택 구조를 제안하고 이를 임베디드 리눅스에 구현한다. 또한 본 논문은 이더넷이 산업용 기기 등의 연결에 활용될 수 있음에 주목하고 독립 이더넷 네트워크에 적합한 전송 프로토콜을 제안한다. 측정 결과 제안된 프로토콜 스택 RTDiP($\underline{R}eal-\underline{T}ime\;\underline{Di}rect\;\underline{P}rotocol$)은 UDP/IP와 비교하여 단방향 통신 지연시간을 최대 59% 감소시켰으며 통신처리율을 최대 155% 향상시킬 수 있음을 보인다. 또한 낮은 우선순위를 갖는 배경 통신 프로세스에 의해서 UDP/IP는 532%가 단방향 통신 지연시간이 증가하나, RTDiP은 2% 미만의 증가만을 보임으로써 프로세스의 우선순위에 따라 패킷 처리가 이루어지고 이를 통해서 실시간 통신을 지원해줄 수 있음을 보인다.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.445-454
• /
• 2006

Almost of industrial measuring instruments usually are equipped only with serial communication devices. In order to connect these instruments to internet, we implement an embedded translator. This device has the hardware components composed of one WAN port, two LAN ports, and two UARTs, and functions as a communication translator between serial and internet communication. it also provides web-based monitoring function that is absent from existing serial-to-ethernet converter. The hardware is implemented using the KS8695 network processor which s an ARM922T as processor core. We have installed the boa web server and utilized the CGI function for internet-based remote control, added the IP sharing function which allows the network with private IP addresses to access the internet, and developed a serial-to-ethernet translation program. Finally, we show an application example of the developed translator that remotely monitors the solar energy production system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.46-53
• /
• 2007

The link-fault recovery in the normal Ethernet bridged networks has relied on the Spanning Tree Protocol(STP) or Rapid STP. However, STP can not offer fast error recovery which is needed real-time services such as aircraft. In this paper, we compare automatic protection switching(APS) providing fault-tolerant function in the BcN back bone system with Avionic Full Duplex Switched Ethernet(AFDX) which is recently equipped in the A380 for Airbone Databuses. Also, we propose a link-bypass scheme for improving fault-tolerant performance of the AFDX by connecting switches and bypass fault section when a fault is originated on the link. For comparing and verifying the performance of proposed scheme, we simulated Ethernet, AFDX, APS and proposed AFDX with link-bypass scheme using NS-2. The proposed AFDX with link-bypass scheme can be applied to aircrafts, BcN backbone networks and industrial automatic networks.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.602-605
• /
• 2001

This paper focus on a method to use Ethernet Network for Industrial Communication Network. Ethernet use the CSMA/CD MAC(Medium Access Control) Protocol at the Data-Link Layer, Which isn't suit for Industrial Communication Network requiring Real-Time Communication, periodic data processing, critical data processing characteristics. In this paper we proposed the Virtual Polling Algorithm at the Application Layer will be solution of using the Ethernet Network for the Industrial Communication Network, Proposed Algorithm terminate the Collision in the network thus Delay Time is reduced and Real-Time Communication will be implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.753-755
• /
• 2010

As demands increase for the Infotainment System, the Multimedia Networking technology for automobile, called MOST(Media Oriented Systems Transport), has been actively applied to the automobile industry, to meet the demands of the Infotainment System. The MOST25 network technology is being restrictively equipped with some of the car models but the problems withbandwidth and compatibility has arisen. In order to solve this, the MOST150 technology has been developed and further research is being carried out to applythe technology to the automobile industry. Thus, for the effective process of the Ethernet traffic in the realization of MOST150/Ethernet Gateway for automobile, we, in the research, shall analyse the Management Mapping method, including the MOST150's Isochronous channel, the MOST Ethernet Packet Channel, and etc. and study the efficient algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2584-2589
• /
• 2015

In this paper, we want to able to reduce the time effectively about the analysis of protocol and development of protocol converter in industrial network. For this purpose, we developed the user protocol converter that can be to analysing the communication protocol in the industrial network. and also that is able to converting to user protocol and transmitting to another network. The developed user protocol converter was consist of S/W and H/W, and is supporting the Modbus, the NMEA0183 and the ethernet. The hardware main processor was used the AVR128, and placed the serial communication part and the ethernet part in converter board. The experiment results, we acquired very high transmission rate and conversion rate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.718-725
• /
• 2004

The real-time industrial network, often referred to as fieldbus, is an important element for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet with cascade structure for industrial communications. More specifically, this paper presents an analytical performance evaluation of switched Ethernet with cascade structure, and a case study about networked control system.