• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.965-976
• /
• 2006

A realistic lifetime seismic-reliability based approach is unavoidable to perform Life-Cycle Cost (LCC)-effective optimum design, maintenance, and retrofitting of structures against seismic risk. So far, though a number of researchers have proposed the LCC-based seismic design and retrofitting methodologies, most researchers have only focused on the methodological point. Accordingly, in most works, they have not been quantitatively considered critical factors such as the effects of seismic retrofit, maintenance, and environmental stressors on lifetime seismic reliability assessment of deteriorating structures. Thus, in this study, a systemic lifetime seismic reliability analysis methodology is proposed and a program HPYER-DRAIN2DX-DS is developed to perform the desired lifetime seismic reliability analysis. To demonstrate the applicability of the program, it is applied to an example bridge with or without seismic retrofit and maintenance strategies. From the numerical investigation, it may be positively stated that HYPER-DRAIN2DX-DS can be utilized as a useful numerical tool for LCC-effective optimum seismic design, maintenance, and retrofitting of bridges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.775-789
• /
• 2008

The Office for Government Policy Coordination announced in 2006, september that a scheme of pre-signal would show remarkable outcome to reduce traffic accidents. Therefore, the Ministry recommended applying preferentially the pre-signal scheme to enhancement projects for high accident frequency areas. In case that the suggested pre-signal was unilaterally introduced to the enhancement projects at intersections, it might rather cause a big trial and error in terms of traffic safety. Hence, on the basis of quantitative analysis, this study was to indicate a pre-signal's effectiveness to reduce the traffic accidents, to illustrate a trend of the accident type due to the pre-signal, and to introduce intersection type that could be appropriate for the pre-signal. The methodology adopted Comparison-Group Method which was developed by Hauer. Through this methodology, overall effectiveness to reduce the accidents is considered positive but individual effectiveness by intersection and by accident case was different. All cases of the accidents at small scale intersection demonstrated positive results to reduce its accidents, while in case of frontal collision and side-right angle collision out of the accident types, the installation of pre-signal rather caused a negative result increasing the accident in terms of the traffic safety. I hope that this study would be a useful reference for future development of the estimation of accident effectiveness. Thus, when the pre-signal is being installed in the big intersection, it is recommended operating the installation concerning carefully improvements about muliple aspects as traffic operation, traffic facility, human factor etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.709-716
• /
• 2006

The rapid changes of family structure such as singles, working couples and so on have effects on a travel behaviour. One of the characteristics from this is the increasing portion of trip-chain, in which plural activities were conducted in a "single outgoing" travel. Therefore travel must be considered as location change to conduct various activities instead of pursuing single travel purpose. This paper specifies a behavioral homogeneous person group by a job, a possession of cars. Based on this classification of person groups and their activity diary, the sequence, time and travel mode of activities in a day can be verified. As a case study household survey was conducted in city Kongju. The survey result shows that the classification of behavioral homogeneous person group based on criteria like employment status and car ownership bring a good result to forecast trip generation in traffic zone.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.299-309
• /
• 2006

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.65-76
• /
• 2010

Recent earthquake events revealed that severe seismic damages were concentrated mostly at sites composed of soil sediments rather than firm rock. This indicates that the site effects inducing the amplification of earthquake ground motion are associated mainly with the spatial distribution and dynamic properties of the soils overlying bedrock. In this study, an integrated GIS-based information system for geotechnical data was constructed to establish a regional counterplan against ground motions at a representative metropolitan area, Seoul, in Korea. To implement the GIS-based geotechnical information system for the Seoul area, existing geotechnical investigation data were collected in and around the study area and additionally a walkover site survey was carried out to acquire surface geo-knowledge data. For practical application of the geotechnical information system used to estimate the site effects at the area of interest, seismic zoning maps of geotechnical earthquake engineering parameters, such as the depth to bedrock and the site period, were created and presented as regional synthetic strategy for earthquake-induced hazards prediction. In addition, seismic zonation of site classification was also performed to determine the site amplification coefficients for seismic design at any site and administrative sub-unit in the Seoul area. Based on the case study on seismic zonations for Seoul, it was verified that the GIS-based geotechnical information system was very useful for the regional prediction of seismic hazards and also the decision support for seismic hazard mitigation particularly at the metropolitan area.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.93-101
• /
• 2023

Climate change has emerged as a global problem, with frequent temperature increases, droughts, and floods, and it is predicted that it will have a great impact on the characteristics and productivity of crops. Cnidium officinale is used not only as traditionally used herbal medicines, but also as various industrial raw materials such as health functional foods, natural medicines, and living materials, but productivity is decreasing due to threats such as continuous crop damage and climate change. Therefore, this paper proposes a model that can predict the physiologically active ingredient index according to the climate change scenario of Cnidium officinale, a representative medicinal crop vulnerable to climate change. In this paper, data was first augmented using the CTGAN algorithm to solve the problem of data imbalance in the collection of environment information, physiological reactions, and physiological active ingredient information. Column Shape and Column Pair Trends were used to measure augmented data quality, and overall quality of 88% was achieved on average. In addition, five models RF, SVR, XGBoost, AdaBoost, and LightBGM were used to predict phenol and flavonoid content by dividing them into ground and underground using augmented data. As a result of model evaluation, the XGBoost model showed the best performance in predicting the physiological active ingredients of the sacrum, and it was confirmed to be about twice as accurate as the SVR model.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.121-129
• /
• 2023

In this study, we attempted to reduce CO₂ generated during manufacturing by replacing limestone (CaCO₃), a carbonate mineral used to produce cement clinker, with a decarbonated raw material to which CO₂ is not bound. The raw material for decarbonization was cement paste attached to waste concrete, among various industrial by-products. Waste concrete has cement paste adhered to the aggregate, which cannot be separated efficiently by general crushing and grinding methods. Peeling and grinding methods effectively remove only the cement paste without damaging the original aggregate. The abrasion time, steel ball type, and steel ball ratio were selected as effective factors for Abrasion. An optimal abrasion experiment was conducted to produce waste concrete fine powder containing decarbonated CaO as a cement clinker raw material through an experimental design method. The experiment revealed that the optimal conditions for producing waste concrete fine powder were an abrasion time of 7 minutes, a steel ball size for pulverization of 8 mm, and a steel ball ratio for pulverization of 0.6.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.100-115
• /
• 2023

The modernization of najeonchil, or mother-of-pearl lacquerware, began in the latter era of the Joseon period and started to set in during the phase of industrial development after the Korean War. Especially, the rise and fall of najeonchil during the first half of the 1900s fluctuated more compared to other types of craft. This paper focuses on the production, supply and demand activities of the works by Min Jong-tae, who was born in 1915, began his career in 1929 and devoted 70 years of his life creating najeonchil craft and furniture. As an apprentice under Jeon Sung-gyu, who revived the craft of najeonchil, Min Jong-tae was not only an artisan who ranked alongside Kim Bongryong, Song Juan, Shim Bugil, Kim Taehee, but also a businessman. In particular, Min led the boom of modern najeonchilgi during the 1970s-80s in Seoul, which was the most important market at that time. However, studies about Min Jong-tae are almost non-existence, despite his accomplishments. This study first describes how Min Jong-tae began the craft of najeonchil and early days of his career around the liberation period, then retraced his efforts in building a supply and demand system in the 1950s-60s. Moreover, this paper covers not only his creations of large-scale najeonchil furniture in the advent of an era of 'wardrobe culture' in the 1970s-80s, but also his exported pieces to Japan, including incense boxes and tea containers. In conclusion, this research derives the historical significance of Min Jong-tae's role as an artisan of najeonchil- designated as Seoul Intangible Cultural Heritage No. 14 in the field of craft.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.145-160
• /
• 2023

The purpose of this study was to compare and analyze diurnal thermal environments using Unmanned Aerial Vehicles(UAV)-derived physical parameters(NDVI, SVF) and ENVI-met modeling. The research findings revealed significant correlations, with a significance level of 1%, between UAV-derived NDVI, SVF, and thermal environment elements such as S↑, S↓, L↓, L↑, Land Surface Temperature(LST), and Tmrt. In particular, NDVI showed a strong negative correlation with S↑, reaching a minimum of -0.52^** at 12:00, and exhibited a positive correlation of 0.53^** or higher with L↓ at all times. A significant negative correlation of -0.61^** with LST was observed at 13:00, suggesting the high relevance of NDVI to long-wavelength radiation. Regarding SVF, the results showed a strong relationship with long-wave radiative flux, depending on the SVF range. These research findings offer an integrated approach to evaluating thermal comfort and microclimates in urban areas. Furthermore, they can be applied to understand the impact of urban design and landscape characteristics on pedestrian thermal comfort.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.107-122
• /
• 2023

The demand for spatial information in the era of the 4th Industrial Revolution is expanding Additionally, interest in attribute data related to geography or location is increasing. In the field of spatial information, spatial information policies and services tailored to the public can be provided through linkage and integration with new attribute data, and these data are resources for this purpose. In order to meet this expanding and diverse demand for spatial information utilization, it is necessary to develop technologies for linking and utilizing various attribute information such as public data. In this study, we aim to present a technology development strategy for linking and integrating attribute data and spatial information through a review of theories related to data linkage and integration, the current status of data on public data portals, and existing prior research. As a result, it was suggested that the data identifier of the attribute data to be linked should be used to develop linkage technology between spatial information and attribute data, and an attribute data linkage process that can be used when designing a prototype for technology development was presented.