• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.401-408
• /
• 2018

The insect industry in Korea has been supported by the Act of Fostering and Supporting Insect Industry since 2010. Based on the Act, insect breeders are entitled as farmers. However, the insect industry is not included in the Fundamental Act of Agriculture, Rural Community and Food Industry which defines all concepts, such as agriculture, farmers, and agricultural products. Legally and strictly speaking, there is no method to defense the insect industry when an argument is raised that insect industry is not included into agriculture, so persons who breed insects are not eligible for all agricultural supports and subsidies of the government. Thus, it is necessary to clear the legal status of insect industry by revising the related laws and regulations.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.197-205
• /
• 2018

In this research, tricycle vehicle simulation based on multi-body environment has been introduced. Mathematical model of tricycle vehicle was developed. In this research the left and right wheel speed are calculated based on the rear steering angle and velocity. The kinematic model for the three - wheel drive system was completed and the results were analyzed using the actual vehicle drawings. Through simulink vehicle performance on linear and rotation movement were simulated. Using the mathematical model the control system can be applied directly to the tricycle vehicle. The simulation result shows that the proposed vehicle model is successfully represent the movement characteristics of the real vehicle. This model assists the vehicle developer to create the controller and understand the vehicle during the development process.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.239-246
• /
• 2010

The aim of this study is selection of the male-sterile plant for inhibiting transgene flow through gamma-irradiation ($^{60}Co$) at the pollination and fertilization cycle of herbicide-tolerant genetically modified (GM) zoysiagrass (Zoysia japonica Steud.). High frequencies of plant mutations were obtained about 18% from $M_1$ generation at the doses (10 to 50 Gy). We also found that some $M_1$ plants showed male-sterile plants using de-husked seeds and comparison of stainable pollen using $KI-I_2$ solution. Besides the effects of irradiation on pollination and fertilization cycle, various other mutations like dwarf, cold tolerance, increasing grains and mass were observed. Four of dwarfism plants were selected through comparison of morphological characteristic between control and mutants during 4 years. These results demonstrated that the gamma-irradiation on pollination and fertilization cycle is very effective to induce the various mutations, and the male-sterile mutants are useful for controlling transgene flow and developing of high quality turfgasses.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.437-438
• /
• 2022

현재 산업현장은 작업한 인부들이 작업을 마치고 청소하는 식으로 현장의 청결을 유지한다. 본 연구에서는 산업현장의 청결을 보다 깨끗하고 안전하게 유지하여 안전사고 발생의 요인이 되는 것을 제거하는 것을 전제로 하여 현재 상용화 되고 있는 로봇청소기와 아두이노를 이용한 센서를 적용하고자 한다. 본 논문은 기존의 로봇청소기에 미세먼지 센서와 유해가스 센서를 탑재하여 산업현장의 환경을 감지하도록 한다. 산업 현장의 미세먼지 농도가 일정 수치 이상이면, 로봇청소기를 작동하도록 한다. 로봇청소기에 공기청정기와 전자석을 추가하여 산업현장의 공기를 쾌적하게 조성하며, 미세 금속 이물질을 처리하는 기능을 탑재하여 산업현장에서 발생하는 이물질을 보다 쉽게 처리하도록 한다. 유해가스 농도가 일정 수치 이상이면, 부저를 통해 경보를 울려 산업현장 내부에 유해가스가 유출되고 있다고 알려준다. 또한, 블루투스 통신을 통해 스마트폰 어플리케이션으로 센서의 값을 확인하여 DC모터, 공기청정기, 전자석 등을 수동조작해 청소되지 않은 부분을 청소하도록 할 수 있다.

• The Optical Journal
• /
• s.140
• /
• pp.32-33
• /
• 2012

(주)모던하이테크, 한국산업기술대학교, 인하대학교 광기술교육센터가 주관하고 LG전자, 한국광학기기산업협회, 경기도 시흥시, 고효율조명협회, 경기 TP 한국산업관리공단 경기지역본부 등이 후원한 '차세대 광학설계 기술향상을 위한 CODE V & LightTools User Conference 2012'가 지난 5월 16일 한국산업기술대학교에서 개최되었다. 모던하이테크가 매년 개최하고 있는 본 컨퍼런스는 광학산업 전문가 200여명이 참석, 정보교환과 커뮤니티의 장으로 펼쳐졌다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.90-94
• /
• 2009

In this parer, we give attention to a wireless temperature measurement system using in industrial site. Therefore, we developed and designed the remote measurement system for an industrial environment. To examine an application possibility of a industrial environment, we analyzed a temperature characteristic of wireless temperature system according to a measurement distance, and discussed about a performance difference according to an antenna change.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.1-6
• /
• 2023

In the realm of dental prosthesis fabrication, obtaining accurate impressions has historically been a challenging and inefficient process, often hindered by hygiene concerns and patient discomfort. Addressing these limitations, Company D recently introduced a cutting-edge solution by harnessing the potential of intraoral scan images to create 3D dental models. However, the complexity of these scan images, encompassing not only teeth and gums but also the palate, tongue, and other structures, posed a new set of challenges. In response, we propose a sophisticated real-time image segmentation algorithm that selectively extracts pertinent data, specifically focusing on teeth and gums, from oral scan images obtained through Company D's oral scanner for 3D model generation. A key challenge we tackled was the detection of the intricate molar regions, common in dental imaging, which we effectively addressed through intelligent data augmentation for enhanced training. By placing significant emphasis on both accuracy and speed, critical factors for real-time intraoral scanning, our proposed algorithm demonstrated exceptional performance, boasting an impressive accuracy rate of 0.91 and an unrivaled FPS of 92.4. Compared to existing algorithms, our solution exhibited superior outcomes when integrated into Company D's oral scanner. This algorithm is scheduled for deployment and commercialization within Company D's intraoral scanner.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.1
• /
• pp.83-90
• /
• 2022

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

• Korean Journal of Clinical Pharmacy
• /
• v.31 no.4
• /
• pp.257-267
• /
• 2021

Background: The need for regulatory science development to evaluate advanced regulatory products is gradually increasing without hindering the technological development. Creating a research environment and fostering experts through the establishment of regulatory agency-led policies are essential for the development of regulatory science. Method: This is a comparative study of the United States, Japan, Singapore, and Korea. The literature and websites of each regulatory agency were reviewed, and the focus was on advantages and comparing advantages based on definition, development trends, and expert training projects. Results: The United States is striving to develop regulatory science in response to changes in the new pharmaceutical industry through the regulatory science report, and to foster expert both inside and outside the Food and Drug Administration (FDA). Japan is promoting regulatory science centered on regulatory science centers, and is focusing on researching work-related regulatory science within the Pharmaceuticals and Medical Devices Agency (PMDA) and improving employees' ability to make regulatory decisions. Singapore was aiming to improve Southeast Asia's regulatory capabilities under the leadership of Centre of Regulatory Excellence (CoRE) within Duke-NUS University. In 2021, Korea is in its early stages, starting to run a university's degree program related to regulatory science this year. Conclusion: Regulatory science should be developed with the aim of improving the regulatory ability of the Ministry of Food and Drug Safety with Korea's independent concept of regulatory science.

• Journal of Environmental Health Sciences
• /
• v.47 no.6
• /
• pp.521-529
• /
• 2021

Background: The coronavirus disease (COVID-19) has caused changes in human activity, and these changes may possibly increase or decrease exposure to fine dust (PM_2.5). Therefore, it is necessary to evaluate the exposure to PM_2.5 in relation to the outbreak of COVID-19. Objectives: The purpose of this study was to compare and evaluate the exposure to PM_2.5 concentrations by the variation of dynamic populations before and after the outbreak of COVID-19. Methods: This study evaluated exposure to PM_2.5 concentrations by changes in the dynamic population distribution in Guro-gu, Seoul, before and after the outbreak of COVID-19 between Jan and Feb, 2020. Gurogu was divided into 2,204 scale standard grids of 100 m×100 m. Hourly PM_2.5 concentrations were modeled by the inverse distance weight method using 24 sensor-based air monitoring instruments. Hourly dynamic population distribution was evaluated according to gender and age using mobile phone network data and time-activity patterns. Results: Compared to before, the population exposure to PM_2.5 decreased after the outbreak of COVID-19. The concentration of PM_2.5 after the outbreak of COVID-19 decreased by about 41% on average. The variation of dynamic population before and after the outbreak of COVID-19 decreased by about 18% on average. Conclusions: Comparing before and after the outbreak of COVID-19, the population exposures to PM_2.5 decreased by about 40%. This can be explained to suggest that changes in people's activity patterns due to the outbreak of COVID-19 resulted in a decrease in exposure to PM_2.5.