• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Journal of Christian Education in Korea
• /
• v.74
• /
• pp.107-134
• /
• 2023

The purpose of this study is to provide a foundation for establishing the correct direction of education that utilizes artificial intelligence, a key technology of the Fourth Industrial Revolution, in the context of Christian education. To achieve this, theoretical and literature research was conducted. First, the research analyzed the historical development of artificial intelligence to understand its characteristics. Second, the research analyzed the use of artificial intelligence in convergence education from an educational perspective and examined the current policy direction in South Korea. Through this analysis, the research examined the direction of Christian education in the era of artificial intelligence. In particular, the research critically examined the perspectives of continuity and change in the context of Christian education in the era of artificial intelligence. The research reflected upon the fundamental educational purposes of Christian education that should remain unchanged despite the changing times. Furthermore, the research deliberated on the educational curriculum and teaching methods that should adapt to the changing dynamics of the era. In conclusion, this research emphasizes that even in the era of artificial intelligence, the fundamental objectives of Christian education should not be compromised. The utilization of artificial intelligence in education should serve as a tool that fulfills the mission permitted by God. Therefore, Christian education should remain centered around God, rooted in the principles of the Bible. Moreover, Christian education should aim to foster creative and convergent Christian nurturing. To achieve this, it is crucial to provide learners with an educational environment that actively utilizes AI-based hybrid learning environments and metaverse educational platforms, combining online and offline learning spaces. Moreover, to enhance learners' engagement and effectiveness in education, it is essential to actively utilize AI-based edutech that reflects the aforementioned educational environments. Lastly, in order to cultivate Christian learners with dynamic knowledge, it is crucial to employ a variety of teaching and learning methods grounded in constructivist theories, which emphasize active learner participation, collaboration, inquiry, and reflection. These approaches seek to align knowledge with life experiences, promoting a holistic convergence of faith and learning.

• Journal of the Korean Society for information Management
• /
• v.39 no.4
• /
• pp.191-213
• /
• 2022

With a view to providing a high-quality policy information service beyond the existing national task service of the national policy information portal (POINT) of the National Library of Korea Sejong, it would be necessary to effectively provide the policy data needed for the implementation of the new national tasks. Accordingly, in this study, an attempt has been made to find a way to connect and develop the BRM-based national tasks and the policy information contents. Towards this end, first, the types of national tasks and the contents of each field and area of the government function's classification system were analyzed, with a focus placed on the 120 national tasks of the new administration. Furthermore, by comparing and analyzing the national tasks of the previous administration and the current information, the contents ought to be reflected for the development of contents related to the national tasks identified. Second, the method for linking and collecting the policy information was sought based on the analysis of the current status of policy information and the national information portal. As a result of the study, first, examining the 1st stage BRM of the national tasks, it turned out that there were 21 tasks for social welfare, 14 for unification and diplomacy, 17 for small and medium-sized businesses in industry and trade, 12 for general public administration, 8 for the economy, taxation and finance, 6 for culture, sports and tourism, science and technology, and education each, 5 for communication, public order and safety each, 4 for health, transportation and logistics, and environment each, 3 for agriculture and forestry, 2 for national defense and regional development each, and 1 for maritime and fisheries each, among others. As for the new administration, it is apparent that science technology and IT are important, and hence, it is necessary to consider such when developing the information services for the core national tasks. Second, to link the database with external organizations, it would be necessary to form a linked operation council, link and collect the information on the national tasks, and link and provide the national task-related information for the POINTs.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.1-20
• /
• 2021

This study was conducted to derive a model of a sustainable economic system for humanity in the era of service economy that requires a paradigm shift. A new long-term sustainable development model has been built on the basis of thousands of years of economic operation experience. Currently, the world is operating the capitalism as the main economic system because there is no better alternative, and the changing economic and social environment such as the advent of the 4th Industrial Revolution is exacerbating the problems of the capitalism, such as job shortages and inequality. In this study, we analyzed the economic management system experienced by human society, and derived an economic system model that is ideal for the modern and future society and is sustainable in the long term. The conditions for a long-term sustainable economic system were presented first. It must be a model that can solve the problems of the current economic system. It must be a model that is faithful to the characteristics of the modern economic society and the nature of the economy itself. And since the new economic system is for humanity, it must be based on the common principles of human society. It should be a model that continuously guarantees core values such as equality and freedom required by human society. After analyzing the problems of the current economic system and analyzing the conditions required for the new system, the basic axioms that the new economic system should be based on were presented, and a desirable model was derived based on this. The structure of the derived model and the specific operation model were presented. In the future, research is needed to specify the operational model so that this model can be settled well in different environments for each country.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.546-551
• /
• 2011

Chrysanthemums, often called mums or chrysanths, belong to the genus Chrysanthemum, which includes about 30 species of perennial flowering plants in the family Asteraceae. We extracted DNA from Dendranthema grandiflorum ('Smileball') to construct a simple sequence repeat (SSR)-enriched library, using a modified biotin-streptavidin capture method. GS FLX (Genome Sequencer FLX System which provides the flexibility to perform the broad range of applications) sequencing (at the 1/8 run specification) resulted in 18.83 mega base pairs (Mbp) with an average read length of 280.06 bp. Sequence analyses of all SSR-containing clones revealed a predominance of di-nucleotide motifs (16,375, 61.5%) followed by tri-nucleotide motifs (6,616, 24.8%), tetra-nucleotide motifs (1,674, 6.3%), penta-nucleotide motifs (1,283, 4.8%), and hexa-nucleotide motifs (693, 2.6%). Among the di-nucleotide motifs, the AC/CA class was the most frequently identified (93.5% of all di-nucleotide types), followed by the GA/AG class (6.1%), the AT/TA class (0.4%), and the CG/GC class (0.03%). When we analyzed the distribution of different repeat motifs and their respective numbers of repeats, regardless of the motif class, of 100 SSR markers, we found a higher number of di-nucleotide motifs with 70 to 80 repeats; we also found two di-nucleotide motifs with 83 and 89 repeats, respectively, but their product lengths were within optimum size (297 and 300 bp). In future work, we will screen for polymorphisms of possible primer pairs. The results will provide a useful tool for assessing molecular diversity and investigating the population structure among and within Chrysanthemum species.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.1-21
• /
• 2020

Recently, the emergence of new technologies caused by the Fourth Industrial Revolution caused a great change not only in the overall society but also in the retail industry. In the retail industry, unmanned stores based on new technologies have emerged, changing the consumption behavior of consumers. In particular, the global pandemic caused by COVID-19, which appeared in December 2019, raised social risks, and as a result of this, the beginning of the non-face-to-face era, interest in unmanned stores is increasing. In this study, the effects of benefits factors (perceived usefulness, perceived economics, perceived enjoyment, relative advantages) and sacrifice factors (perceived risk, technicality) perceived by unmanned store users on continuous use intention through perceived value. In addition, it is a study to test through empirical analysis what role the social risk from COVID-19 plays in the process of consumption through unmanned stores. The purpose of this study is to provide strategic implications for the activation of unmanned stores in the non-face-to-face era. In this study, a total of 293 copies of data were collected for users of unmanned stores for hypothesis testing. In addition, the collected data was analyzed using SPSS 21.0 and AMOS 21.0 statistical programs. The results of the study are summarized as follows. First, it was found that the perceived benefits (perceived usefulness, perceived economics, perceived playfulness, and relative advantages) of unmanned stores all had a significant positive effect on perceived value. Second, it was found that all perceived sacrifices (perceived risk, technicality) of unmanned stores had a significant negative effect on perceived value. Third, it was found that the perceived value of unmanned stores had a significant positive effect on the intention to continue use. Finally, the social risk from COVID-19 has been shown to play a moderating role when the perceived sacrifice of unmanned stores affects the perceived value.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1135-1144
• /
• 2023

Many agricultural reservoirs in South Korea, constructed before 1970, have become aging facilities. The majority of small-scale reservoirs lack measurement systems to ascertain basic specifications and water levels, classifying them as unmeasured reservoirs. Furthermore, continuous sedimentation within the reservoirs and industrial development-induced water quality deterioration lead to reduced water supply capacity and changes in reservoir morphology. This study utilized Light Detection And Ranging (LiDAR) sensors, which provide elevation information and allow for the characterization of surface features, to construct high-resolution Digital Surface Model (DSM) and Digital Elevation Model (DEM) data of reservoir facilities. Additionally, bathymetric measurements based on multibeam echosounders were conducted to propose an updated approach for determining reservoir capacity. Drone-based LiDAR was employed to generate DSM and DEM data with a spatial resolution of 50 cm, enabling the display of elevations of hydraulic structures, such as embankments, spillways, and intake channels. Furthermore, using drone-based hyperspectral imagery, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) were calculated to detect water bodies and verify differences from existing reservoir boundaries. The constructed high-resolution DEM data were integrated with bathymetric measurements to create underwater contour maps, which were used to generate a Triangulated Irregular Network (TIN). The TIN was utilized to calculate the inundation area and volume of the reservoir, yielding results highly consistent with basic specifications. Considering areas that were not surveyed due to underwater vegetation, it is anticipated that this data will be valuable for future updates of reservoir capacity information.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.7-7
• /
• 2023

Currently, the main technologies of various fourth industries are big data, the Internet of Things, artificial intelligence, blockchain, mixed reality (MR), and drones. In particular, "digital twin," which has recently become a global technological trend, is a concept of a virtual model that is expressed equally in physical objects and computers. By creating and simulating a Digital twin of software-virtualized assets instead of real physical assets, accurate information about the characteristics of real farming (current state, agricultural productivity, agricultural work scenarios, etc.) can be obtained. This study aims to streamline agricultural work through automatic water management, remote growth forecasting, drone control, and pest forecasting through the operation of an integrated control system by constructing digital twin data on the main production area of the nojinot industry and designing and building a smart farm complex. In addition, it aims to distribute digital environmental control agriculture in Korea that can reduce labor and improve crop productivity by minimizing environmental load through the use of appropriate amounts of fertilizers and pesticides through big data analysis. These open-field agricultural technologies can reduce labor through digital farming and cultivation management, optimize water use and prevent soil pollution in preparation for climate change, and quantitative growth management of open-field crops by securing digital data for the national cultivation environment. It is also a way to directly implement carbon-neutral RED++ activities by improving agricultural productivity. The analysis and prediction of growth status through the acquisition of the acquired high-precision and high-definition image-based crop growth data are very effective in digital farming work management. The Southern Crop Department of the National Institute of Food Science conducted research and development on various types of open-field agricultural smart farms such as underground point and underground drainage. In particular, from this year, commercialization is underway in earnest through the establishment of smart farm facilities and technology distribution for agricultural technology complexes across the country. In this study, we would like to describe the case of establishing the agricultural field that combines digital twin technology and open-field agricultural smart farm technology and future utilization plans.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.85-106
• /
• 2023

This study reviewed and derived the success factors of overseas agricultural startups and studied their integrated research model. Agricultural startups and general startups have in common that poor resources and infrastructure exist from a resource-based perspective after startup, but a differentiated approach from general startups is required due to the nature of the primary industry of agriculture. In this study, we approach the company internal factors (human resources/vision/distribution network capacity/capital capacity/cultivated crops/physical resources/farming technology, etc.) and external factors (agricultural infrastructure/laws/regulations/relationship with surrounding society, etc.) We tried to build a research model that can be integrated by focusing on various existing research models, success factors, and entrepreneurship. Through this, it is intended to present an integrated model that is practically helpful to business performance to entrepreneurs, business-related persons, and researchers who need an integrated understanding of agricultural startups at home and abroad. made for purpose In this paper, a standard model was established through three types (existing agricultural startup, small and medium-sized business startup, multinational company, and comprehensive approach) according to size and characteristics for modeling agricultural startup success factors. Through this, a total of 9 success factors (agricultural management, external environment, manager/founder characteristics, corporate identity, business management, organizational culture, infrastructure, commercialization capability, and sustainable growth) were derived. The implication of this study is that the success factors of agricultural startups were comprehensively presented based on 'entrepreneurship' for various domestic and foreign agricultural startup cases. By confirming the systematic categorization, a standard model for future agricultural startup success factors was presented, and as a result, a foundation was presented for systematic research and practical effectiveness of related research in the future.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.91-107
• /
• 2023

Lean startup is a concept that combines the words "lean," meaning an efficient way of running a business, and "startup," meaning a new business. It is often cited as a strategy for minimizing failure in early-stage businesses, especially in software-based startups. By scrutinizing the case of a startup L, this study suggests that lean startup methodology(LSM) can be useful for hardware and manufacturing companies and identifies ways for early startups to successfully implement LSM. To this end, the study explained the core of LSM including the concepts of hypothesis-driven approach, BML feedback loop, minimum viable product(MVP), and pivot. Five criteria to evaluate the successful implementation of LSM were derived from the core concepts and applied to evaluate the case of startup L . The early startup L pivoted its main business model from defecation alert system for patients with limited mobility to one for infants or toddlers, and finally to a smart bottle for infants. In developing the former two products, analyzed from LSM's perspective, company L neither established a specific customer value proposition for its startup idea and nor verified it through MVP experiment, thus failed to create a BML feedback loop. However, through two rounds of pivots, startup L discovered new target customers and customer needs, and was able to establish a successful business model by repeatedly experimenting with MVPs with minimal effort and time. In other words, Company L's case shows that it is essential to go through the customer-market validation stage at the beginning of the business, and that it should be done through an MVP method that does not waste the startup's time and resources. It also shows that it is necessary to abandon and pivot a product or service that customers do not want, even if it is technically superior and functionally complete. Lastly, the study proves that the lean startup methodology is not limited to the software industry, but can also be applied to technology-based hardware industry. The findings of this study can be used as guidelines and methodologies for early-stage companies to minimize failures and to accelerate the process of establishing a business model, scaling up, and going global.