• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.119-129
• /
• 2023

Sleep apnea causes various secondary disease such as hypertension, stroke, myocardial infarction, depression and cognitive impairment. Early detection and continuous management of sleep apnea are urgently needed since it causes cardio-cerebrovascular diseases. In this study, wearable device for monitoring respiration during sleep using PVDF film was developed to detect vibration through trachea caused by breathing, which determines normal breathing and sleep apnea. Variables such as respiration rate and apnea were extracted based on the detected breathing sound data, and a noise reduction algorithm was established to minimize the effect even when there is a noise signal. In addition, it was confirmed that irregular breathing patterns can be analyzed by establishing a moving threshold algorithm. The results show that the accuracy of the respiratory rate from the developed device was 98.7% comparing with the polysomnogrphy result. Accuracy of detection for sleep apnea event was 92.6% and that of the sleep apnea duration was 94.0%. The results of this study will be of great help to the management of sleep disorders and confirmation of treatment by commercialization of wearable devices that can monitor sleep information easily and accurately at home during daily life and confirm the progress of treatment.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.49-62
• /
• 2022

Recently, with the development of Smart City Solutions such as Big data, AI, IoT, Autonomous driving, and Digital twins around the world, the proliferation of various smart devices and social media, and the record of the deeds that people have left everywhere, the construction of Smart Cities using the "Big Data" environment in which so much information and data is produced that it is impossible to gauge the scale is actively underway. The Purpose of this study is to construct an objective and systematic analysis Model based on Big Data to improve the transportation convenience of citizens and formulate efficient policies in Urban Information and Public Transportation accessibility in sustainable Smart Cities following the 4th Industrial Revolution. It is also to derive the methodology of developing a Big Data-Based public transport accessibility and policy management Platform using a sustainable Urban Public DB and a Private DB. To this end, Detailed Living Areas made a division and the accessibility of basic living amenities of Gwangju Metropolitan City, and the Public Transportation system based on Big Data were analyzed. As a result, it was Proposed to construct a Big Data-based Urban Information and Public Transportation accessibility Platform, such as 1) Using Big Data for public transportation network evaluation, 2) Supporting Transportation means/service decision-making based on Big Data, 3) Providing urban traffic network monitoring services, and 4) Analyzing parking demand sources and providing improvement measures.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.30-49
• /
• 2022

Recently, as the transition to the untact era due to COVID-19 accelerates, non-face-to-face and non-contact practices have become commonplace, and the OTT (Over-The-Top) service market that provides media content such as movies and broadcast programs through the open Internet is largely expanded and it is receiving great attention from the MZ generation, who are familiar with digital devices and environments. In this study, the effects of OTT service characteristics on MZ generation users' flow, satisfaction and brand loyalty were examined, focusing on Netflix users, one of the representative OTT service brands. In order to carry out this study, a total of 216 people who have used the Netflix OTT service platform were empirically verified by using the survey data of those who have used it for analysis. As a result of the analysis, it was found that among the characteristics of OTT service, contents diversity, convenience, and reliability had a positive (+) effect on flow. Also, flow has a positive (+) effect on satisfaction, and satisfaction has a positive (+) effect on brand loyalty. However, among the characteristics of the OTT service, the recommended service did not have a positive (+) effect on the flow, and the flow did not have a direct positive (+) effect on the brand loyalty. Flow had a positive (+) effect on the brand loyalty through satisfaction. Through this study, it is expected that the market revitalization of the OTT service-related industry and the increasing number of OTT service brands will be able to contribute to the establishment of marketing strategies for the MZ generation consumers, and to provide practical implications.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.63-107
• /
• 2016

This paper analyzed the restrictiveness of the rules of origin of the 15 FTAs of Korea utilizing the restrictiveness index suggested by Estevadeordal(2000). The main purpose of the paper is to provide an update of the current status and characteristics of the restrictiveness of the rules of origin based on product type and country. The research showed that FTA with EU and Turkey showed the highest restrictiveness, whereas New Zealand, Peru and India showed the lowest. Overall, Korea's restrictiveness index was found to be at appropriate levels. Additionally, in terms of the current status by restrictiveness index, over time with the exception of European countries in the FTA, products with the lowest score in restrictiveness index of 2 continued to be processed in the Korea-Peru FTA which illustrated the current trend of easing restrictiveness. In terms of restrictiveness index based on product type, commodity products, processed food, clothing-fabric-general merchandise were found to be very strict. However, in categories such as general machinery, electronics, chemical products and precision instruments, the restrictiveness index showed the lowest readings. The results imply the high restrictiveness in sensitive products that are vulnerable from competition through high tariffs, and easing of restrictiveness in competitive products in order to vitalize trade. The results also show that in Korea's FTA, Korea's rules of origin in FTA vary and are sorted in a complicated manner. With an increasing number of FTAs and a number of different rules of origin, there is a need for standardized criteria for Korea. This study was significant in that it compiled all the rules of origin and the restrictiveness index of all FTAs that came into effect and have been negotiated in Korea. The results of the research are expected to be used as an informative and meaningful guideline for Korea's FTAs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.630-633
• /
• 2021

Microphones can convert received voice signals to electric signals. They have been widely used in various industries such as radios, smart devices and vehicles. Recently, the demands for small size and high sensitive microphones are increased according to the minimization of wireless earphone with the development of smart phone. A MEMS system is a good candidate for an ultra-small size microphone of a next generation and a read out IC for high sensitive MEMS sensor is researched from many industries and academies. Since the microphone system has a high sensitivity from environment noise and electric system noise, the system requires a low noise power supply and some low noise design techniques. In this paper, a low noise LDO is presented for small size MEMS microphone systems. The input supply voltage of the LDO is 1.5-3.6V, and the output voltage is 1.3V. Then, it can support to 5mA in the light load condition. The integrated output noise of proposed LDO form 20Hz to 20kHz is about 1.9uV. These post layout simulation results are performed with TSMC 0.18um CMOS technology and the size of layout is 325㎛ × 165㎛.

• Journal of Software Assessment and Valuation
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2019

The existing smart grid device authentication system is concentrated on DCU, meter reading FEP and MDMS, and the authentication system for smart meters is not established. Although some cryptographic chips have been developed at present, it is difficult to complete the PKI authentication scheme because it is at the low level of simple encryption. Unlike existing power grids, smart grids are based on open two-way communication, increasing the risk of accidents as information security vulnerabilities increase. However, PKI is difficult to apply to smart meters, and there is a possibility of accidents such as system shutdown by sending manipulated packets and sending false information to the operating system. Issuing an existing PKI certificate to smart meters with high hardware constraints makes authentication and certificate renewal difficult, so an ultra-lightweight password authentication protocol that can operate even on the poor performance of smart meters (such as non-IP networks, processors, memory, and storage space) was designed and implemented. As a result of the experiment, lightweight cryptographic authentication protocol was able to be executed quickly in the Cortex-M3 environment, and it is expected that it will help to prepare a more secure authentication system in the smart grid industry.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.63-65
• /
• 2023

BIM and AR technologies have been assessed as a means of enhancing productivity within the construction industry, through the provision of effortless access to critical data on site, achieved via the projection of 3D models and associated information onto actual structures. However, most of the previous researches for applying AR technology in construction quality management has been performed for construction projects in general, resulting in only overall on-site management solutions. Also, a few previous researches for the application of AR in the quality management of specific elements like reinforcements focused only on simple projection, so conducting specific quality inspection was impossible. Hence, this study aimed to develop a practically applicable BIM-based AR quality management system targeted for reinforcements. For the development of this system, the reinforcement inspection items on the quality checklist used at railway construction sites were analyzed, and four types of AR functions that can effectively address these items were developed and installed. The validation result of the system for the actual railway bridge showed a degradation of projection stability. This problem was solved through model simplification and enhancement of the AR device's hardware performance, and then the normal operation of the system was validated. Subsequently, the final developed reinforcement quality inspection system was evaluated for practical applicability by on-site quality experts, and the efficiency of inspection would significantly increase when using the AR system compared to the current inspection method for reinforcements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.259-271
• /
• 2023

Since the short-wave infrared spectrum has a significant range of variation depending on the production environment, countries with advanced resource exploration are collecting the spectrum and building a database. Representative organizations include the USGS and CSIRO, and they are currently carrying out a project in China that can synthesize and use a large number of existing data. The USGS library provides a total of 2,457 spectra targeting not only minerals but also various materials that respond to infrared radiation. Among these, there are 1,276 mineral spectra, which are about half of the total. The spectrum title includes information, such as analysis devices (NIC4, BECK, ASDNG, etc.), purity codes (a, b, c, d, u), and measurement methods (AREF, RREF, RTGC, TRAN). Analyzed raw data are provided in ASCII and GIF format. The CSIRO library has a total of 502 spectra, of which the majority, 493, correspond to mineral spectra. The USGS library is a free, publically available resource, while the CSIRO library is bundled with TSG8 or must be purchased separately. Among these, when comparing the eight spectra whose spectral shapes can be analyzed with the spectra of domestic illite, the positions of the absorption peaks are significantly different from those of domestic illite, except for one Japanese illite. Additional research will be needed to determine the causes of such differences, and the domestically relevant databases should be established as well.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.4
• /
• pp.173-191
• /
• 2022

The global economic crisis, the trend of an aging society, and the rapid digital transformation are huge burdens and crises for our society. Due to these environmental changes and the economic recession, entrepreneurship and re-employment issues after retirement have emerged as social issues. This study was conducted to empirically analyze what factors affect seniors when they may start a business. In particular, as the fourth industrial revolution progresses, the focus was on the capability to utilize information and communication technology (ICT) and digital media that cannot be avoided. For empirical analysis, an online survey of seniors was conducted and 287 valid samples were analyzed. SPSS 24.0 and Macro Process 4.0 were used for statistical analysis. As a result of the empirical analysis of this study, self-efficacy and personal innovation for information technology acceptance(ICT), and communication capability using digital media had a significantly positive (+) effect on senior's entrepreneurial intention. However, the perceived usefulness of information technology and the capability to utilize digital media devices were not tested for significance. Among the variables that had a significant effect, personal innovation was found to have the greatest effect. Opportunity recognition was found to play a mediating role between self-efficacy, personal innovation, communication capabilities, and senior's entrepreneurial intention. The results of this study are of academic and practical significance in that digital media utilization capability is also an influential factor among various factors influencing the entrepreneurial intention of seniors.