• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.266-268
• /
• 2002

본 연구에서는 사출 성형품의 품질에 영향을 주는 인자중 금형의 온도에 따라 성형품의 웰드라인의 표면 및 단면의 미시구조에 미치는 영향에 대해 알아보았다. 또한, MmSH process 가 사출성형품에 미치는 영향 또한 알아보았다. 금형온도가 증가함에 따라 유동수지 선단간의 결합이 원활해져 웰드라인의 폭과 길이 모두 저하되는 것을 볼 수 있었으며, MnSH Process는 외관상 일반적인 사출조건에 비해 웰드라인, V-notch가 나타나지 않음을 알 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.210-210
• /
• 2004

최근 광 디스크로부터 신호를 검출하고 기록하는 핵심장치인 장 Pick-up이 점차로 고기능화, 소형화, 경량화 되면서 광 기록장치들의 발전에 크게 기여하고 있다. 초소형, 초경량 광 Pick-up을 생산하기 위해서는 광 Pick-up의 무게와 크기에 큰 영향을 미치는 렌즈의 재료를 유리에서 플라스틱으로 전환하고, 비구면 렌즈를 사용하는 것이 필요하다. 플라스틱 비구면 렌즈를 대량 생산하기 위해서 가장 많이 사용되는 방법이 사출성형이고, 소형, 경량, 휴대기능을 강조하는 제품동향으로 인하여 플라스틱 렌즈의 주요 생산기술인 사출성형의 중요성이 날로 부각되고 있다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.499-508
• /
• 2016

Injection molding is a method for manufacturing many products, wherein a plasticized resin is injected into a mold at high pressure and hardened. According to the method, the product can be manufactured into various forms, and the mass production of up to tens of thousands of products is possible. The purpose of this study was to determine the process conditions for manufacturing a door latch for automobiles, through an analysis of the injection molding method. To calculate an appropriate injection flow for injection molding, a primary analysis for comparing the injection time, pressure, flow pattern, consolidation range, shear stress, shear rate, and weld line, as well as a secondary analysis for determining the conditions for stabilizing the molding temperature, holding pressure, and cooling process, were conducted. The characteristics of injection molding, and their influence on the product quality are discussed. No weld line and pores were observed on the products that had been manufactured based on the process conditions determined above. In addition, there were no flaws regarding the deformation compared to the prototype. Therefore, the manufacture of a product under the conditions determined in this study can reduce the defect rate compared to the existing production, and the process is also more competitive due to reduced production time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1040-1046
• /
• 2006

This paper is aimed to investigate the deformation caused by ununiform contraction of injection molding with highly big differences of thickness by the continuity of various curvature radius. By CAE analysis, the uniform cooling structure and optimum molding conditions are found for Jars made of SAN and PMMA materials and applied to the design of chill. In order toevaluate the molding pressure, resin temperature, molding temperature, cooling conditions, Moldflow program is applied. As results of experiments, the deformation and inferiority phenomena in Jars are analyzed for each factor and proposed the injection molding conditions to minimize the cooling structure and reduce the cycle time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.771-777
• /
• 2014

Injection-compression molding was used for film insert molding of an automotive door grip using films with three-dimensional embossed patterns. A vacuum mold was fabricated for vacuum-assisted thermoforming of the film, and an injection-compression mold was developed for film insert molding. Three pressure transducers were installed inside the mold cavity to measure cavity pressures. Injection-compression molding experiments under various compression strokes and toggle speeds were performed to investigate their effects on the cavity pressure and heights of the embossed patterns. The compression stroke of 0.9mm and low toggle speed resulted in a higher degree of conservation of embossed patterns. Additionally, the processing conditions for the maximum heights of embossed patterns were almost similar to those for minimum integral value of cavity pressures. The injection-compression molding process presents the opportunity to impart a soft-touch feeling of plastic parts printed with embossed patterns.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.147-150
• /
• 2002

사출성형 공정의 컴퓨터 시뮬레이션(CAE)은 짧은 시간에 저 비용으로 여러 설계 및 재료와 공정조건의 조합을 시험할 수 있는 수단이다. 실제 금형을 가공하고 시제품을 생산하기 전에 미리 해석을 수행하여 봄으로써 설계의 오류 및 부적절한 공정조건의 설정을 방지할 수 있다. 컴퓨터 시뮬레이션은 공정조건에 의한 사출성형을 가능하게 해 준다. 즉, 수지의 거동, 냉각과정, 압력거동 등을 컴퓨터 화면을 통해 볼 수 있으며 이를 기초한 성형품의 예상문제점을 파악할 수 있다. 본 논문에서는 CAE기술을 응용한 Back Light Panel의 설계에 대해 논의하고자 한다.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.341-346
• /
• 2012

Injection molding is one of the widely used polymer processing operations. It is being used for not only conventional injection molding but gas injection molding, water injection molding, and injection compression molding. Injection compression molding involves injection and compression operation, and it gives uniform physical property and high dimensional quality of product. In this study, injection compression characteristics for various product shapes have been investigated by computer simulation. Product containing side wall showed not much effective in injection compression molding since wall thickness direction was perpendicular to the compression direction. Uniform and low shrinkage was observed in injection compression molding comparing conventional injection molding. Subsequently injection compression molding can be used for molding precise product. Optimal injection compression molding condition was obtained using design of experiment for plastic lens and the results were compared with conventional injection molding.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2004

In the injection molding of plastic optical lenses, the molding conditions have critical effects on the quality of the molded lenses. Since there are many molding parameters involved in injection molding process, determination of the molding conditions for lens molding is very important in order to precisely control the surface contours of an optical lens. Therefore this paper presents the application of neural network in suggesting the optimized molding conditions for improving the quality of molded parts based on data of FE Analysis carried out through CAE software, Timon-3D. Suggested model in this paper, which serves to learn from the data of FE Analysis and induce the values for optimized molding conditions. has been implemented for searching the molding conditions without void and with minimized thickness shrinkage at lens center of injection molding optical lens. As the result of this study. we have confirmed that void creation at the inside of lens is primarily determined by mold temperature and thickness shrinkage at center of lens is primarily determined by the parameters such as holding pressure and mold temperature.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.245-248
• /
• 2001

미성형은 수지 점도가 높거나 유동경로가 너무 제한적이거나 혹은 용융 수지가 일찍 고화되어 금형내에 수지가 완전히 충전되지 않고 냉각 및 고화되는 현상을 말한다. 일반적으로 수지의 유동성이 부족하기 때문에 금형 전체에 수지가 미치지 못하여 일어난다고 생각되는 수가 많으나 반드시 그것만이 아니고 그 외에 여러 가지 원인이 있을 수 있다. 본 연구에서는 실제 현장에서 미성형이 발생한 제품을 대상으로 이를 해결하기 위해 여러 가지 공정조건을 바꾸어서 시뮬레이션을 여러번 반복해 봄으로써, 사출압력, 금형온도, 사출속도, 용융수지온도와 같은 공정조건들이 미성형에 미치는 영향을 각각 시뮬레이션을 통하여 고찰하여 보았다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.159-167
• /
• 1999

Sandwich injection molding is one of the remarkable polymer processes recently developed from conventional injection molding. But it is almost impossible to do theoretical investigation that we've researched it through numerical simulation. In this paper, numerical simulation on the study of sandwich injection molding is based on Finite Element Method and FAN/Control Volume method. In addition to conventional filling parameter that can confirm skin polymer melt front, new filling parameters have been introduced to confirm core polymer melt front advancement. These filling parameters are defined in each layer which is divided to solve temperature field along the thickness direction. One can notice different filling patterns resulted from the variation of material properties such as viscosities and power-law indexes, and processing conditions such as switch-over times and wall temperatures. It gives us a better understanding of the sandwich injection molding process. And we can recognize that it's the core polymer spatial distribution after the completion of filling that is the most important key point to use this process for industrial molding process.