• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제14회 학술강연논문집
• /
• pp.13-13
• /
• 2000

일반적으로 고체추진 로켓 모타의 개발단계 때 공통적으로 수행되는 주시험(main test)으로는 추력, 압력, 회전률 등의 성능측정을 하기 위한 정적연소시험(static firing test), 내부 정수압(hydrostatic pressure)에 의한 폭발 압력 시험, 연소중이나 연소 후 케이스에 대한 굽힘 강성 시험, 이외에 노화 시험, 환경시험 등이 요구된다. 그러나 신궁과 같은 휴대용 대공 시스템의 추진기관 개발의 경우에는 사수를 보호하기 위해 여러 가지 안전장치들이 설계되고, 이러한 장치들의 성능에 대한 요구 조건들을 확인하기 위한 특수시험(specific test)들이 필요하게 된다. 이러한 특수시험을 위한 각종 시험대들을, 위에서 언급한 주시험을 위해 사용되는 정적시험대(static test bench)들과 구분하기 위해 동적 시험대(DTB : Dynamic Test Bench)라고 한다. 본 연구에서는 신궁 추진기관의 사출모타 점화에서 비행모타 점화에 이르는 일련의 비행절차를 확인하기 위한 동적 시험대 설계 및 제작, 계측장치 구성 및 데이터 획득 방법 등에 관한 내용을 소개하며, 동적 시험대에서 수회에 걸쳐 수행된 동적 시험 결과를 분석/정리하였다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.1-5
• /
• 2012

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• 소성∙가공
• /
• 제11권4호
• /
• pp.341-348
• /
• 2002

For the light guide plate of the TFT-LCD, there have been increasing demands for higher brightness, thin and light-weight design, and lower power consumption. To meet these demands, a micro-prism-type frontlight that integrates a prismatic sheet and a light-guiding plate has been developed. In this paper, the influences of processing conditions on the brightness were studied lot the injection molding of the light guide plate. Based on the experiment with an actual mold, the design of experiments and the neural network theory were used lot choosing the optimal processing parameters to increase the brightness and the uniformity. The verification experiment also showed that the brightness and the uniformity were increased dramatically with the chosen processing conditions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.363-370
• /
• 2003

Shrinkage of injection molded parts is different form operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It is also various for different resins which have crystalline structure or not. In this study part shrinkage was investigated for various operational condition and resins; PBT for crystalline polymer, and PC and PMMA for amorphous polymer was used in experiment. Crystalline polymer shows higher part shrinkage by about three times than amorphous polymer. Part shrinkage increased as injection temperature and mold temperature increased and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for large gate size. Part shrinkage according to the gate location was that the position in the part with close to the gate showed large shrinkage and this phenomenon might be occurred by residual stress.

• 소성∙가공
• /
• 제20권2호
• /
• pp.173-178
• /
• 2011

Environmental Stress Cracking(ESC) is one of the most common causes of unexpected brittle failure of thermoplastic polymers. The exposure of polymers to liquid chemicals tends to accelerate the crazing process, initiating crazes at stresses that are much lower than the stress causing crazing in air. In this study, ESC of acrylonitirile butadiene styrene(ABS) was investigated as a function of the molding conditions such as injection velocity, packing pressure, and melt temperature. A constant strain was applied to the injection molded specimens through a 1.26% strain jig and a mixture of toluene and isopropyl alcohol was used as the liquid chemical. In order to examine the effects of the molding conditions on ESC, an experimental design method was adopted and it was found that the injection velocity was the dominant factor. In addition, predictions from numerical analyses were compared with the experimental results. It was found that the residual stress in the injection molded part was associated with the environmental stress cracking resistance (ESCR).

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 춘계학술발표논문집
• /
• pp.130-133
• /
• 2002

금형온도가 사출 성형품에 미치는 영향 중에 결정성수지인 PP(Polypropylene)와 비결정성수지인 PS(Polysyene)는 금형온도가 높아짐에 따라 각기 다른 결과를 나타내었다. PS성형품은 금형온도가 높을수록 수축율이 줄어들고 두께 편차가 적어지는 경향을 관찰할 수 있었고, PP성형품의 경우에는 결정의 생성으로 인한 상반된 경향이 관찰되었다. 또한, 금형온도에 따른 캐비티의 매끄러운 면과 거친 면의 결과로 볼 때 금형온도가 높을수록 캐비티의 충전성 및 전사성이 향상되었다. MmSH(Momentary Mold Surface Heating)조건인 경우는 수축율과 전사성 모두다 양호한 결과를 보여주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.281-286
• /
• 1993

Projection TV에는 시각 품질을 최종적으로 표시하는 디스플레이 소자인 비구면플라스틱 렌즈를 적용하고 있으나 전량 일본에서 완제품으로 공급 받고 있다. 플라스틱 비구면 렌즈를 성형하기 위해서는 사출 공정에 대한 철저한 이해 와 폴리머의 광탄성 거동에 대한 개념이 핵심이라고 말할 수 있다. 복굴절성 실험은 폴리머의 유변학적 거동을 파악 하는데있어 가장 유용한 실험중의 하나이다. 본 글에서는 이와 관련된 사항인 복굴절성, 잔류 응력 형성 메카니즘, 밀도이완 작용의 상관관계와 비구면 렌즈의 성형 조건 및 공정에대해 기술 하였고, 또한 측정된 수지데이타를 이용 상용 S/W를 사용하여 유동, 냉각, 보압 ( 압축) 및 수축 해석을 실시 하여 각 stage에서 경험한 온도 와 압력의 이력에따라 변화하는 열 응력에 기인한 잔류 응력 계산 Pg을 개발 상용 S/W 와 비교 검증 하였다.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.110-118
• /
• 1995

The filling phase analysis of the injection molding process for thermoplastics was applied to predict pressure, themperature and shear stress in the test mold, and the results were compared with the experiment using 30% glass fiber added ABS resin. The finite difference method was used in the analysis considering the effects of heat transfer between molten polymer and mold wall, and also frictional heating by shear flow. The analysis results were considered as a method to improve the quality and the productivity of injection molding process. Using the analysis results, the molding factors such as mold-ability of polymers, performance of injection molding machine, positioning of gate and dimendsioning of runner in the injection molding process can be estimated at the design stage of mold for good quality and productivity.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.33-37
• /
• 2002

A short shot is a molded part that is incomplete because insufficient material was injected into the mold. Remedial actions to control the process conditions can be taken by the injection molding experts based on their knowledge and experience. However, it is very difficult for the non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of the optimal process conditions based upon fuzzy logic algorithm is proposed so that trial and error can be minimized and the non-experts as well as the experts can also find the optimal process conditions.

• 소성∙가공
• /
• 제21권2호
• /
• pp.107-112
• /
• 2012

Gas-assisted injection molding(GAIM) produces parts with hollow internal sections. The technique offers benefits to powder injection molding(PIM), with lower material usage and reduced time for de-binding processes. In this study, the effects of processing parameters on gas penetration length of gas-assisted powder injection molding(GAPIM) were investigated for SUS316L stainless steel powder feedstock. Experiments were planned based on the Taguchi method, involving processing variables such as melt temperature, shot size, gas pressure, and gas delay time. The most significant parameters affecting gas penetration length were gas delay time and shot size, while the effects of melt temperature and gas pressure was relatively insignificant.