• The Research Journal of the Costume Culture
• /
• v.26 no.6
• /
• pp.899-918
• /
• 2018

Upcycling is the process of repurposing abandoned resources or useless products into products of better quality or higher environmental value. Upcycling products are evaluated to be sustainable because they demonstrate environmental values. However, domestic upcycling companies are operating on a small scale with a slow growth rate. This study aims to examine the value and risk factors of upcycling products from previous literature and clarify the effect of these ambivalent characteristics on purchase intention. This provides direction regarding factors upcycling companies should focus on. The data were collected via an online experiment with women in their 20s and 30s residing in South Korea, nationwide. The data were statistically analyzed using SPSS 21.0 and AMOS 18.0. Analysis of this data suggests that environmental, design, and self-expression value positively affect purchase intention. This extends previous upcycling literature by identifying design and self-expression value as important antecedents of purchase intention. However, in contrast to previous literature, no significant effect of performance or diversity risk was found. These results indicate that ethical attitude has a moderating effect on the relationship between environmental value and purchase intention. This study confirms that consumers intend to purchase upcycling products when they possess not only environmental value but also design and self-expression value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.1
• /
• pp.40-57
• /
• 2018

This study investigated the design practice model based on the creative fashion designer's methodology in fashion education. 'The Design Cycle' was the criterion used to analyze the design method of Demna Gvasalia who is one of the outstanding contemporary designers. After that, this study's practice model was then developed and experimented to verify its effectiveness in design practice as based on Gvasalia's method where ready-to-wear products were firstly dissembled then re-constructed with new designs created based on re-constructed results. To test its effectiveness, a student oriented design workshop was held to extract design results through the practice model; in addition, the students also conducted a survey to evaluate the effectiveness of the method. According to the self-evaluation result, the participants generally accept the design efficiency through the distinctive process. An evaluation by three fashion experts was also conducted. Experts assessed that the model is recommendable for seniors having knowledges on 'Construction', it is appropriate to deal with the trickled-down copying trend that could promote student interest and generate separate results according to different visions. Therefore, it could be accepted that the applicability of this study's practice model was confirmed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1478-1486
• /
• 2008

The human body composed of concave and convex curvatures, and the current 3D scanning technology which involves inherent measurement errors make it difficult to extract distinct curvature plot directly. In this study, a method of extracting the clear curvature plot and its application to the cycling pants design were proposed. We have developed the ergonomic pattern from the 3D human body reflecting cycling posture. For the ergonomic design line on the 3D human body, the 3D information on the lower part of four male bodies with flexed posture was analyzed. The 3D scan data of four subjects were obtained using Cyberware. As results, the iteration of the tessellated shell was executed 100 times to obtain optimized curvature plots of the muscles on the body surface, and the boundaries of the curvature plots were applied to the design lines. Maximum(Max-pattern) and mean curvature plots(Mean-pattern) were adopted in the design line of the cycling pants, and performance of those lines was compared with that of conventional princess line(Con-pattern). The average error of total area and length in the 2D pattern developed from the 3D flexed body surface in this study were very minimal($4.58cm^2$(0.19%) and 0.15mm(0.46%)), which was within the range of tolerable limits in clothing production. The pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the cycling skin, so that the extra ease for movement and good fit was not need to be considered.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.165-176
• /
• 2021

To solve environmental problems, research and efforts are required to reduce leather waste that is generated in large quantities during the leather manufacturing process. Leatherboard is a plate-like material that is made by crushing leather waste, such as trimming or shaving scraps and mixing fibers, pulp, rubber, and adhesives. The aim of this study is to provide basic data on the localization of leatherboard manufacturing technology for outsoles, which are increasingly in demand due to their excellent performance and price competitiveness. Interviews with experts and related organizations were conducted to investigate the related global technology trends. Also, the performance of three products that can be used as reference materials were evaluated and compared. As part of the research and efforts to reduce the amount of leather waste generated, high-performance materials using leather waste were developed and commercialized by major western companies. In Korea, various efforts have been made since 2000, and some companies have produced leatherboard for interior uses. However, the amount of waste recycled relative to that generated is not large due to the limited demand. Natural leather soles perform better than leatherboard soles in all evaluation aspects. In the case of leatherboard, performance varied by manufacturer. German products showed flexibility resistance and dimensional stability, thereby meeting performance requirements. However, abrasion resistance and cleavage resistance were slightly below the required performance standards, and research and development is needed to improve performance in those areas. Currently, it is impossible to evaluate the performance of domestic products due to underdevelopment. However, if the development of process technology continues based on the performance evaluation results of the best leatherboard in the shoe industry, materials for outsoles will be able to be produced domestically with prices competitiveness while realizing natural leather materials performance to some extent.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.105-117
• /
• 2022

This study investigated how women in their 20s to 60s think about the relationship between environmental pollution and the fashion industry and categorized their perceptions. Through this, I tried to find out the direction of the fashion industry to improve environmental problems. There were four types of perceptions of fashion and environmental pollution. Type 1 recognized that the process of producing and consuming clothing causes environmental pollution, but it was a type that preferred fast fashion and valued trends. Type 2 thought that the fashion industry pollutes air and water quality, and if the price was high, recycling clothes were not purchased. Type 3 thought that the fashion industry was not the main culprit of environmental pollution, and that if you purchase clothes, you should protect the environment by wearing them for a long time. Type 4 was a type of effort to reduce environmental pollution by considering the environment first, purchasing old clothes, and changing clothes. As the importance of the environment has grown, various efforts are needed to reduce environmental pollution in the fashion field.

• Prospectives of Industrial Chemistry
• /
• v.24 no.2
• /
• pp.22-30
• /
• 2021

현재 인류는 플라스틱(plastic) 세상에 살고 있다. 의류, 식품, 주거 생활 곳곳에 플라스틱이 존재하며, 플라스틱이 없는 세상은 상상조차 할 수 없다. 하지만, 플라스틱 사용량 증가에 따른 폐플라스틱의 배출량의 증가는 심각한 환경문제들을 야기하여 생태계뿐만 아니라 인간에게도 위협이 되고 있다. 이를 해결하기 위한 방법으로 단순히 폐플라스틱의 처리에 그치지 않고, 이를 활용하여 새로운 고부가가치의 생성물을 제조하는 플라스틱 업사이클링(plastic upcycling) 시스템이 최근 주목을 받고 있으며, 현재 다양한 형태로 연구개발이 진행되고 있다. 그 중의 한가지로 본 기고문에서는 알칸 교차 복분해(cross alkane metathesis) 반응을 소개한다. 알칸 교차 복분해 반응은 수소화/탈수소화(hydrogenation/dehydrogenation) 반응과 올레핀 복분해(olefin metathesis) 반응으로 이루어져, 탈수소화 반응 후 생성된 이중결합 탄소를 갖는 두 개의 알켄 화합물이 자리바꿈을 통해 새로운 이중 결합을 형성하는 반응이다. 이 촉매반응 과정이 반복되면 저분자화된 새로운 알칸 화합물을 생성되는데, 이는 기존의 플라스틱 처리방식인 열분해 및 촉매 분해 공정보다 낮은 반응온도를 요구한다. 또한 이를 통해 상대적으로 높은 순도의 가솔린 및 디젤을 생성할 수 있기 때문에 폐플라스틱 처리 공정의 새로운 대안기술이 될 수 있다. 본 기고문에서 폐플라스틱 중 가장 큰 비중을 차지하는 폴리에틸렌을 처리하는 대안기술로써 알칸 교차 복분해 반응의 메커니즘과 및 촉매의 역할, 그리고 반응성에 영향을 주는 인자에 대해 기술한다.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.131-146
• /
• 2004

The Purpose of this study is to suggest strategies for environmental education through the Practical Arts(TechnologyㆍHome economics) Subject in a viewpoint of the clothing & textiles resources to resolve problems in the clothing life area. For this, this study was carried out through review of literature which is related with the consumption, the environmental problems, the environmental policies, and regulations of the government and new environmental technologies, of clothing & textiles industries and environmental education. The major findings of the study were as follows; 1) The environmental education system model in a viewpoint of the Clothing & Textiles resources was developed. This model system is consisted with interactions on school, government, industry, home and non-government organizations. Thus, the fact that Practical Arts(TechnologyㆍHome economics) Subject were the most effective subject to teaching the environmental education viewpoint of the Clothing & Textiles resources was confirmed. 2) The standards were analysed out to analyse the contents in the clothing area of the Practical Arts(TechnologyㆍHome economics) Subject. It were consist of 4 factors and 12 elements under the factors: Awareness of clothing & textile resources(clothing consumption, production of clothing & textile and environmental problems). Planning and buying of clothing(planning, buying), Management of clothing(understand of textile. human body & environment, laundering and Environmental pollution, arrangement & conservation) Recycling & exhaust of clothing(contribution, redesign, recycling, exhaust) 3) Analysing the current Practical Arts (TechnologyㆍHome economics) subject from the Environmental education in the clothing section, the environmental education related with clothing were taught the most in the middle school course, and environmental contents were concentrated in the recycling factors. but not so much on other factors. 4) After analysing the Practical Arts (TechnologyㆍHome economics) subject, the strategies were suggested for reinforcing the environmental education in the clothing of the Practical Arts(TechnologyㆍHome economics) subject.