• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.95-104
• /
• 2010

In wireless communication system, a variety of retransmission algorithms are used in order to improve the quality of service of users. But the system may be inefficient because retransmission algorithms operate independently with other layers. Also, the quality of service can be degraded due to the unnecessary retransmission of packets. To solve these problems, the study on the cross-layer retransmission schemes have been widely performed. However, in order to apply cross-layer retransmission schemes to wireless communication system, whether the performance of cross-layer retransmission schemes meets QoS requirements of each service class has to be verified. Thus, this paper proposes the mathematical model for analyzing the performance of the cross-layer retransmission schemes and derives both the suitable retransmission scheme and the optimal retransmission parameter on each service class. The proposed mathematical model selects the MCS level based on channel state information and The performance analysis is comparatively easy in case that HARQ, ARQ, and AMC schemes are combined. The proposed mathematical model also enables the analysis of the packet transmission delay. To utilize the analytical model, this paper derives the suitable retransmission scheme and the optimal retransmission parameter for delay sensitive services in WiMAX system. Also, the proposed analytical model can be used to analyze the performance of wireless communication system such as LTE and WLAN.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.61-67
• /
• 1999

물론 이 글이 콘크리트 분야에 종사하는 사람이 알아야 하는 모든 것을 언급하지는 않는다 ; 본인의 저서 'Properties of Concrest'의 판매에 나쁜 영향을 주고 싶지도 않다. 내가 원하는 것은 콘크리트를 제작할 때 우리 모두가 주의를 기울여야 하는 중요한 몇 가지를 강조하는 것이다. 포트랜드 시멘트만 들어있는 보통의 콘크리트가 사용되는 시대는 이미 사라져가고 있고, 단순한 응용을 제외하고는 곧 사라질 것이다. 대부분의 경우는 가능한 일련의 시멘트계 재료 중에 선택을 해야 한다. 혼화제, 특히 고성능 감수제는 중요한 역할을 한다. 물을 많이 첨가하는 것이 작업성을 높이는 유일한 방법도 아니고 최선의 방법도 아니다. 성능을 기준으로 한 기준설정에 관여하는 사람은 이 모든 것을 명심해야 한다. 그렇지 않으면 시방기준에 명시된 규정과 근원적인 요구사항이 잘못 이해되고, 시험배합을 통해서만 잘못되었다는 것이 분명해지게 된다. 그 단계에서는 예상보다, 비록 틀린 것이지만, 더 많은 비용이 들 것이다. 시방규정은 통상적인 조항 외에 갈수록 내구성에 관심을 더 많이 보인다. 가끔은 내구성이 구조물의 기대수명에 대한 연수로 표현되기도 한다. 이 숫자를 배합재료에 관한 자료로 변환시키는 데는 여러 배합재료 및 배합비가 콘크리트의 성질에 미치는 영향에 관하여 깊이 알고 있어야 한다. 모든 사람이 그러한 구체적인 지식을 가질 필요는 없지만, 각 조직마다 상의할 수 있는 사람은 있어야 한다. 엔지니어가 언급한 규정이 따로 없고, 도면의 주를 참고하거나 구체적인 절이 명시되지 않은 상태에서 국가 시방기준을 통해서 조금씩 내용을 수집해야 하는 경우의 상황은 더 난감하다. 이러한 경우는 배합설계나 재료의 선택을 책임지고 있는 사람이, 환경에 대한 노출조건 및 필요한 배합재료에 관하여 잘 알고 있어야 한다. 일반적으로 말해서 콘크리트의 배합은 필요한 특정용도에 따라서 선택되어야 한다. 이것이 사람들이 고성능 콘크리트라 부르는 것이라고도 할 수 있다. 내 생각으로는 고성능 콘크리트와 보통 콘크리트의 경계는 곧 사라질 것이고, 앞으로 대다수 고객에게 주문 콘크리트 혹은 맞춤 콘크리트를 제공해야 할 것이다. 만약 이러한 접근방식에 더 많은 비용이 든다면, 그것을 보상하는 방법은 콘크리트에 대한 이미지를 높이고, 또한 앞으로 모든 용도에 계속적으로 이용될 수 있도록 하는 것이다. 아니면 구조물을 보수하고, 보수한 것을 또 보수하고, 해체하고 해야 할 것이다. 결국은 재활용 골재를 생산할 수 있다고 웃으면서 말할지 모르지만, 이런 식으로는 불만을 지닌 사용자가 콘크리트를 가능하면 멀리하게 만들 것이다. 콘크리트는 절대 심각한 경쟁에 처하지 않을 것이라는 가정은 무모하다. 내가 배합비에 대해서 강조해 왔지만, 이것으로 최종적으로 좋은 콘크리트가 된다는 보장은 없다. 비빔에서는 일반적으로 큰 문제는 없지만 골재에 함유된 수분을 더 잘 제어해야하고 주의를 게을리하지 말아야 한다. 비빔시간은 모든 재료가 잘 섞이기에 충분해야 하는데, 마이크로 실리카가 포함되어 있을 경우에는 더욱 그렇다. 단위시간당 믹서의 작업량을 높이기 위해서 충분히 비비지 않아서는 안된다. 그리고 마지막으로, 콘크리트가 타설되고 다져진 후, 적절하게 양생이 되어야 한다. 마이크로 실리카가 배합에 사용되었을 경우에는 특히 그러하지만, 이것은 모든 콘크리트에서 양생을 잘하는 것이 피복부에서 유해물질이 유입되는 것을 최소화하고 철근을 완전히 보호하는데 있어서 절대적이다. 내가 지금까지 말한 것은 콘크리트에 관한 충분한 지식과 이해를 필요로 한다. 이것은 당연하고 또한 적절한 것이라고 생각한다. 왜냐하면 더 이상 콘크리트를 수준낮은 싸구려 재료로 간주해서는 안되기 때문이다.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.101-109
• /
• 2011

Climate change affects all components of the global environment system and, in turn, all components mutually interact and affect climate change through non-linear feedback processes. It is thus necessary to study the interaction between the climate and the environment, in order to comprehensively understand and predict climate and environment change. However, current relevant systems are limited to particular areas and do not sufficiently support the mutual linking of research studies. Therefore, this study develops prototype a GIS based integrated DB management system for supporting the climate and environment data storage, management and distribution. The integrated DB management system was developed using VB.NET languages and ArcObjects component. First, considering the demands of climate environment experts, the study areas are selected and the methods of data management and utilization were defined. In addition, a location-based GIS DB was created in order to aid in understanding climate change through visual representation. Finally, the integrated DB management system provides an efficient data management and distribution data and it creates synergistic effect on climate and environment study. It also contributes significantly to the comprehensive diagnosis and prediction of climate change and environment systems.

• The Journal of Society for e-Business Studies
• /
• v.20 no.3
• /
• pp.89-112
• /
• 2015

Recently, the business environment of healthcare has changed rapidly due to the entering the mobile era, the intensifying global competition, and the explosion of healthcare needs. Despite of necessity in expanding new IT-based medical services and investing IT resources to respond environmental changes, the small and medium sized hospitals could not realize these requirements due to the limited management resources. CHISSMH is designed and presented in this research to provide high valued clouding medical services with reasonable price. CHISMH is designed and presented in this research to provide high valued medical services with reasonable price through cloud computing. CHISME is designed to maximize resource pooling and sharing through the visualization. By doing so, Cloud Service provider could minimize maintenance cost of cloud data center, provide high level services with reasonable pay-per-use price. By doing so, Cloud Service provider could minimize maintenance cost of cloud data center, and could provide high level services with reasonable pay-per-use price. CHISME is expected to be base framework of cloud HIS services and be diffusion factor of cloud HIS services Operational experience in CHISSMH with 15 hospitals is analyzed and presented as well.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.461-469
• /
• 2015

The aim of this study is to find out the user's needs of a 3D hand gesture interface in the smart home environment. To find out the users' needs, we investigated which object the users want to use with a 3D hand gesture interface and why they want to use a 3D hand gesture interface. 3D hand gesture interfaces are studied to be applied to various devices in the smart environment. 3D hand gesture interfaces enable the users to control the smart environment with natural and intuitive hand gestures. With these advantages, finding out the user's needs of a 3D hand gesture interface would improve the user experience of a product. This study was conducted using a diary method to find out the user's needs with 20 participants. They wrote the needs of a 3D hand gesture interface during one week filling in the forms of a diary. The form of the diary is comprised of who, when, where, what and how to use a 3D hand gesture interface with each consisting of a usefulness score. A total of 322 data (209 normal data and 113 error data) were collected from users. There were some common objects which the users wanted to control with a 3D hand gesture interface and reasons why they want to use a 3D hand gesture interface. Among them, the users wanted to use a 3D hand gesture interface mostly to control the light, and to use a 3D hand gesture interface mostly to overcome hand restrictions. The results of this study would help develop effective and efficient studies of a 3D hand gesture interface giving valuable insights for the researchers and designers. In addition, this could be used for creating guidelines for 3D hand gesture interfaces.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.357-363
• /
• 2014

The development of information technology grows the society and allows the user to generate more information and the requirements. According to recent growing interest in digital convergence technologies, digital convergence can be utilized by a variety of methods as a new study. Electronic culture atlas would be digitized cultural information that represents a particular area on the map. In detail, spatial data like as point, line, and area can be used to represent the culture information. Using electronic culture atlas, also, it is possible to provide and utilize information which is associated with time, space(map) and subject(culture). Thus, electronic culture atlas could be used as a method for the humanities or area studies and spread research results by displaying on the culture atlas. In general, existing electronic culture atlas used bitmap image mostly as a base map. Using bitmap image, it is difficult to represent to provide three-dimensional information of specific area. Also, it happens problem such as breakage occurs during zoom-in operation. To solve this problems, we design and implement electronic culture atlas based on Google Earth which is three-dimensional map service.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.591-601
• /
• 2018

This paper discusses methods to effectively operates and evaluates an infrastructure system for lane-level positioning based on satellite navigation. The lane-level positioning infrastructure provides correction information on range measurements with integrity information on the correction to a user with a single frequency (cheap) satellite navigation receiver in order to perform lane-level positioning and integrity monitoring on the position estimate. The architecture and configuration of the lane-level positioning system are described from the systematic level in order to provide a comprehensive insight of the system. The operation/evaluation system for the integrated infrastructure is then presented. The evaluation results of the real implemented system are provided. Based on the results, we discuss requirements to increase the system stability from the operation perspective.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.172-178
• /
• 2019

Although the needs for providing resilient PNT information are increasing, threats due to the intentional RFI or space weather change are challenging to resolve. eLoran, which is a terrestrial navigation system that use a high-power signal is considered as a best back-up navigation system. Depending on the user's environment in the eLoran system, the user may use one of E-field or H-field antennas. H-field antenna, which has no restriction on setting stable ground and is relatively resistant to noise of general electronic equipment, is composed of two loops, and shows anisotropic gain pattern due to the different measurement at the two loops. Therefore, the H-field antenna's phase estimation value of signal varies depending on its direction even at the static environment. The error due to the direction of the signal should be eliminated if the user want to estimate the own position more precisely. In this paper, a method to compensate the error according to the geometric distribution between the H-field antenna and the transmitting station is proposed. A model was developed to compensate the directional error of H-field antenna based on the signal generated from the eLoran signal simulator. The model is then used to the survey measurement performed in the land area and verify its performance.

• The Journal of Society for e-Business Studies
• /
• v.24 no.3
• /
• pp.1-18
• /
• 2019

Due to the great advances in e-Marketplace and changes in type of items purchased from the online market, it has been dramatically increased the demand of the storage and transportation under the special conditions such as restricted temperature. Especially, the cold chain needs the way to transparently measure and monitor the entire network in realtime because it has a very complicated structure and requires totally different criteria at the every different steps and items. In this research, it has been presented the performance evaluation metrics to make contract using service level agreement (SLA), the way to apply the smart contract based on blockchain, the structure of blocks, service platform and application in order to build cold chain which can prevent the risk factors by measuring and sharing information in realtime using block chain technology. In addition, we have proposed the way to store the measured performance and reputation of each player in the block using smart contract based on SLA. With the presented framework, all players including service providers as well as users can secure the information for making the rational decisions. When the service platform is actually built and operated, it seems possible to secure the information in transparently and realtime. Also, it is possible to prevent the risk factors or prepare the preemptive plans to react on them.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.199-216
• /
• 2019

The public SW market is 3 trillion won, which is less than 10% of the total SW market. However, due to the nature of the domestic market, it is an important market with a relatively large impact on small and medium-sized software companies. In this market, government is operating the Public SW Project Demand Forecasting System in order to support the marketing activities of small and medium sized SW companies and establish a fair market order. The current system has limitations such as lack of user convenience, insufficient analysis capability and less business connection. This study was conducted to identify the problems of these systems and to propose a new system for improving the convenience of users and expanding the information utilization of SMEs. To this end, we analyzed the requirements of each stakeholder. We proposed the 2-phased forecasting cycle, the management cycle, and the system life cycle of public SW projects and created a unified identifier (UID) so that the information of those projects can be identified and linked among them. As a result, an integrated reference model of project information management based on system life cycle was developed, which can explain the demand forecasting and project information, and the improved processes was also designed to implement them. Through the result of this study, it is expected that integrated management of public SW projects will be possible.