• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2022

The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.4
• /
• pp.20-36
• /
• 2022

This study aims to provide basic data for high-quality street tree management by setting reasonable management items and appropriate unit prices by reviewing the adequacy of current street tree management. Currently, street tree management items, except for street tree pruning, use general landscape tree quantity per unit for the street tree management quantity per unit. KEPCO (Korea Electric Power Corporation) applied pruning items from standard electric production infrastructure and carried out the activities at an average unit price of 51% lower for heavy pruning and 39% lower for light pruning than the standard estimate. This was judged to be a level that could not maintain or increase the quality of street tree management. It was determined that an appropriate standard unit price for street tree management was necessary. To improve the quantity per unit for the proper management of street trees, it was necessary to review costs in the field. However, due to the absence of data on actual construction costs in the domestic landscape field, detailed items of the US RSMeans Building Construction Cost Data (RSMeans) were reviewed, and the actual construction costs were calculated by applying personal domestic expenses. As a result, the standard of the estimated unit showed a good ratio of 107% for heavy pruning of street tree pruning compared to the actual construction cost, but light pruning was underestimated with a 59% ratio. Shrub pruning was 82%, weeding was 92%, tree fertilization was 87%, and windbreak wall installation was 91% under-engineered. In addition, it was also confirmed that the watering by sprinkler trucks and chemical spraying were over-designed compared to the actual construction cost at the rates of 118% and 124%, respectively. Due to the specificity of the street trees, the increase in personal expenses and the input cost of equipment, such as road safety controls, were judged to be the main cause of the underestimation of items. Therefore, it is necessary to add items related to street trees and general landscape trees to the landscape maintenance items of the standard of the estimated unit.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Resources Recycling
• /
• v.32 no.3
• /
• pp.57-67
• /
• 2023

The treatment of waste plastic has primarily been entrusted to small companies, which has resulted in challenges in obtaining an accurate overview of the current state of affairs and ensuring profitability. Consequently, despite the presence of recycling technology, their practical application has proven to be challenging. In this study, as part of the waste plastic material recycling plan, it is assumed that the PET/OPP laminated waste film is peeled off at the waste film generation site for the second use. The recycling rate of PET/OPP delaminated waste film is assumed to be 2%, 10%, and 30% referring to the figures suggested by "Life-cycle Post Plastic Measures" from the Korean government. In this study, a physical separation method was developed as a recycling approach for waste PET. A result of cost-benefit analysis was conducted to evaluate the economic viability of the recycling process based on changes in the recycling rate. The findings indicated that a recycling rate of waste PET was 30% or higher resulted in a cost-benefit ratio (Benefit-cost ratio, BCR) of 1.32, exceeding the threshold of BCR ≥1, which is considered to meet the minimum requirement for cost-benefit balance. As the government's allocation ratio and unit price are expected to increase in the future, the cost-benefit ratio is expected to increase further. This case is expected to serve as a pilot initiative for waste PET recycling and foster profit creation for businesses in similar industries.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.123-130
• /
• 2023

Salmonella spp. are prevalent foodborne pathogens that are infective at relatively low concentrations, thus posing a serious health threat, especially to young children and the elderly. In several countries, the management and regulation of Salmonella spp. in food, including seafood, adhere to a negative detection standard. The risk of infection is particularly high when seafood is consumed raw, which underscores the importance of timely detection of pathogenic microorganisms, such as Salmonella. Accordingly, this study aimed to develop a combined pre-treatment and detection method that includes pre-culture and DNA extraction in order to detect five species of Salmonella at concentrations below 10 CFU/mL in seafood. The effectiveness of the proposed method was assessed in terms of the composition of the enrichment (pre-culture) medium, minimum incubation time, and minimum cell concentration for pathogen detection. Furthermore, a practical DNA extraction method capable of effectively handling high salt conditions was tested and found to be successful. Through polymerase chain reaction, Salmonella spp. Were detected and positively identified in shellfish samples at cell concentrations below 10 CFU/g. Thus, the proposed method, combining sample pre-treatment and cell culture with DNA extraction, was shown to be an effective strategy for detecting low cellular concentrations of harmful bacteria. The proposed methodology is suitable as an economical and practical in situ pre-treatment for effective detection of Salmonella spp. in seafood.

• Korean Journal of Breeding Science
• /
• v.51 no.3
• /
• pp.190-200
• /
• 2019

It is reported that the absence of lipoxygenase-3 (LOX-3) may contribute to a reduction in stale flavor after the storage of rice. To improve the quality of stored rice of the Korean japonica rice cultivar, we conducted a breeding program to develop near-isogenic rice without LOX-3 in the genetic background of Saenuri, a mega variety of Korea. In the first step of the breeding program, we used a donor parent of LOX-3 null, Daw Dam, and a recurrent japonica parent, Sindongjin, to develop HR27873-AC12 by backcross (BC₁), color test for introgression of lox-3, and anther culture for rapid fixation. In the second step, we used the donor parent, HR27873-AC12, and the recurrent parent, Saenuri, to develop HR28896-31-3-1-1 by backcross (BC₁), marker-assisted selection (MAS) for lox-3, and phenotypic selection (PS) for agronomic traits. Finally, in the third step, we developed HR30960-186-2-1-2-1 (Jeonju624), derived from a cross between Saenuri and HR28896-31-3-1-1, by MAS for lox-3 and PS with high selection pressure for agronomic characteristics. Jeonju624 was confirmed with the introgression of lox-3 by molecular marker. Jeonju624 was a mid-late maturing rice with similar agronomic characteristics to Saenuri, lodging tolerance with short culm, erect plant architecture, and resistance to bacterial blight and rice stripe virus. The yield components of Jeonju624 were mostly similar to Saenuri, except for the 1,000-grain weight of brown rice. The appearance of the grain of Jeonju624 was better than that of Saenuri, and the characteristics of cooked rice were similar to those of Saenuri. In the genetic background analysis using 406 KASP (Kompetitive Allele-Specific PCR) markers, Jeonju624 was confirmed to be the near-isogenic line (NIL) of Saenuri with a 95.8% recovery rate. Jeonju624 is the NIL of Saenuri without LOX-3, and overcomes the linkage drag of Daw Dam with similar agronomic characteristics and genetic background to Saenuri. Jeonju624 can be utilized as a practical cultivar to improve the quality of stored rice, breeding material for the introgression of lox-3, and genetic material to elucidate the effect of introgressed genes.

• Journal of the Daesoon Academy of Sciences
• /
• v.21
• /
• pp.323-367
• /
• 2013

한국의 대순진리회는 증산 성사의 가르침을 숭신하는 종교단체로서, 한국 사회에 상당한 영향력을 가지고 있다. 1969년 창설된 대순진리회는 포덕·교화·수도를 삼대 기본사업으로, '음양합덕·신인조화·해원상생·도통진경'을 종지로, '안심·안신·경천·수도'를 사강령으로, '성·경·신'을 수도의 삼요체로 삼고 있다. 또한 인간개조와 포덕천하·구제창생·보국안민을 통하여 지상천국을 건설하는 것을 목표로 한다. 대순진리회는 사상적 측면에서 무(巫)와 유(儒)·불(佛)·도(道)를 포용하고 있다. 이러한 대순사상을 바탕으로 대순진리회의 도인들은 근엄하고 세밀한 실천수도를 수행하는데, 그 내용을 살펴보면 중국 유·불·도의 양생문화와 많은 공통점이 있는 동시에, 또한 뚜렷한 한국 문화의 특색을 띠는 부분도 있다. 이런 면들은 모두 개인적 수도와 사회적 안정을 실현하는 데 큰 도움이 되고 있다. '안심·안신·경천·수도'의 사강령은 대순진리회의 도인들이 지켜야 할 가장 기본적인 행위규범이다. '성·경·신'의 삼요체는 사강령을 실천하기 위한 내면적 수양으로서 모든 수도활동의 근본이 되는 것이다. 삼요체 중에서 '성'을 가장 근본적인 것으로 생각하는데, 그 이유는 오직 '성'을 갖춘 사람만이 '경'과 '신'을 논할 수 있기 때문이다. 반대로 마음속에 망념이 있거나 경거망동을 하는 사람들은 상제에 대한 '경'과 '신'을 잃게 된다. '성실함'이라는 내면적 도덕 품성은 인간으로 하여금 더욱 정직하고 안정되며 오래 지속되게 한다. 뿐만 아니라 '성'은 수도자들로 하여금 더욱 순수해지고, 어리석음을 버리게 한다. 크나큰 도를 성취하려면 먼저 이렇게 얼핏 보기에는 어리석지만 끈기 있는 마음이 필요하다. '성'하면 기운이 솟구쳐 내면이 더욱 안정되고 번뇌는 사라진다. 성심을 수련하면 마음이 안정되고, 마음이 안정되면 정신이 안정되는데, 정신이 안정되면 걱정이 사라지기에 몸도 건강해진다. 삼요체중 '경'과 '신'에 있는 큰 의미 가운데 하나는 상제님에 대한 경배와 믿음을 끝까지 가지라는 것이다. '해원상생·보은상생'은 대순사상의 가장 중요한 대도(大道) 윤리로서 도인들의 수도를 인도하는 기본적인 법칙이다. 대순진리회에서 말하는 해원은 단지 개인 한 사람의 해원이 아니라 우주의 질서를 바로잡는 해원이라는 점에서 중요하다. 그렇기 때문에 대순진리회 도인들은 개개인으로 시작하여 자신의 원한을 해결할 뿐만 아니라, 땅의 원한, 천민의 원한, 여인의 원한 등 모든 원을 해결해 주고자 한다. 즉 삼계의 모든 불평등을 해소하고 불합리한 부분을 바로잡는 것이다. 해원의 다른 측면은 보은이라 할 수 있다. 해원과 보은은 상보상조의 관계에 있는데, 이는 곧 도인들이 행하는 수도의 양 날개라 생각된다. 해원을 통하여 과거의 장애를 제거하고, 보은을 통하여 현재의 덕을 쌓는 것이다. 보은을 하려면 항상 감사의 마음을 간직해야 한다. 그 의미는 인간관계에 있어서 다른 사람이 베푼 은혜를 항상 고맙게 생각해야 한다는 것이며, 더 나아가 천지가 우리에게 베푼 은혜도 감사하게 생각해야 한다는 것이다. 모든 원한이 풀어지고, 모든 은혜를 다 갚았을 때 삼계가 조화롭고 통하게 될 것이다. 대순진리회에서는 도인들의 실천수도 면에서 두 가지 측면을 강조하는데, 즉 포덕교화와 근언신행이다. 근언신행은 자아발전을 위한 도인들의 내적 수련이며, 포덕교화는 도인들이 외부 세상에 대순사상을 알리고 가르치는 것을 말한다. 양자는 동전의 양면과 같이 떨어질 수 없는 관계에 있다. 다른 사람을 포덕·교화 하려면 도인들 스스로가 먼저 말과 행동에 조심해야 한다. 왜냐하면 말과 행동을 조심하는 것 자체가 곧 포덕교화에서 다른 사람의 모범이 되기 때문이다. 인생을 살면서 추구해야 할 가장 높은 목표는 덕(德)을 세우는 것이고, 그 다음은 공(功)을 세우는 것이며, 그 다음은 언(言)을 세우는 것이다. 덕·공·언은 세월이 지나도 그 가치가 빛을 바래지 않는다. 이 세 가지 중 한 가지를 이룬 사람이면 불후하다고 할 수 있다. 성인들이 성인으로 칭송 받았던 이유는 모두 육체를 초월한 덕·공·언으로 세상을 풍요롭게 했기 때문이다. 그렇기 때문에 비록 그들이 세상을 떠났다 하더라도 마치 살아있는 것처럼 영원히 추앙되니, 이것을 통하여 영생을 얻는 것이다. '영생(永生)' 만큼 높은 경지에 도달하는 '양생'이 또 어디에 있겠는가? 대순진리회 실천수도의 최고목표는 바로 인간 내면의 수양을 최고의 경지로 끌어올리는 것으로서 이는 곧 음양합덕·도통진경이다. 다시 말해서 영원히 불후한 경지에 이르고 만세(萬歲)토록 영생하는 것이며 신(神) 그리고 성인이 되는 것이다.

• Korean Journal of Culture and Social Issue
• /
• v.17 no.3
• /
• pp.343-364
• /
• 2011

This study investigated the objective and perceived level of economy and its relationship with mother's mental health, parenting behaviors, and problem behaviors in preschoolers. Data drawn from mothers and teachers of 238 preschoolers, ages 3-5, were used. Using the objective and perceived level of economy, subjects were classified into four groups. Individuals categorized as high by objective and perceived level of economy, low by objective and perceived level of economy, high by objective and low by perceived level of economy, and low by objective and high by perceived level of economy were categorized as in-agreement/high group, in-agreement/low group, over-estimator group, and under-estimator group, respectively. To investigate the difference between groups, one-way ANOVAs and post-hoc analyses were used. The results showed that in-agreement/low group and under-estimator group showed greater depression and anxiety than in-agreement/high group and over-estimator group. In addition, in-agreement/high group and over-estimator group showed greater affective parenting behaviors and lower aggressive parenting behaviors than in-agreement/low group and under-estimator group. In terms of internalizing problem behavior by mother, in-agreement/high group and over-estimator group were lower than under-estimator group. In terms of externalizing problem behavior by mother, in-agreement/high group was lower than under-estimator group. However, in terms of internalizing and externalizing problem behavior by teacher, there was no difference between groups. In externalizing problem behavior by teacher, in-agreement/low group was lower than over-estimator group.