• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.109-120
• /
• 1995

절리가 발달된 경암질 암반내에서 터널을 굴착할 때에 발생하는 심각한 문제중의 하나는 암반내에 존재하는 불연속면과 굴착에 의하여 형성되는 자유면에 의하여 생성된 블록의 낙반 사고이다. R.E. Goodman, Gen-hua shi$^{3)}$ 등에 의하여 제안된 블록이론은 암반사면이나 지하공동에 존재하는 절리들의 방향성을 조사하여 우세한 방향의 절리들에 의하여 발생하는 블록들의 안정, 불안정 및 낙반의 가능성 여부를 판정할 수 있도록 하였다. (중략)

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.1-8
• /
• 1997

Seismic stratigraphic analysis of the high resolution profiles obtained from the southeastern shelf of Korea divided the deposits into 4 sequences; 1) sequence D, 2) sequence C, 3) sequence B and 4) sequence A (Holocene sediments). Sequence D was deposited in shallow-water environment at west of the Yangsan Fault as the basin subsided. On the other hand, the eastern part was formed at the slope front. Landward part of the slope-front fill sediments were eroded and redeposited nearby slope due to the syndepositional tilting of the basin. This tilting probably resulted from the continuous closing of the Ulleung Basin. Sequence C is made of stacked successions of the lowstand fluvial sediments, transgressive sediments and marine highstand sediments derived from the paleo-river in the western part of the Yangsan Fault. Sequence C in the eastern part of the Yanshan Fault was formed at the shelf break. Progradation of the lowstand sediments resulted in broadening of the shelf. Sequence C in the eastern part was also tilted but the tilting was weaker than in Sequence D. During the formation of sequence B the tilting stopped and the point source instead of the line source started in both sides of the Yangsan Fault. Sequence B was composed of the highstand systems tract partially preserved around the Yokji island, lowstand systems tract mainly preserved in the Korea Trough and transgressive systems tract. After the stop of the tilting, the force of compression due to the closing of the Ulleung Basin may be released by the strike-slip faults instead of tilting.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.03a
• /
• pp.97-108
• /
• 2001

절리가 발달한 암반의 거동평가를 위한 해석적 방법은 연속체 모델과 불연속체 모델을 사용하는 방법으로 대별할 수 있으며, 연속체 모델을 사용할 경우에는 유한요소법이나 유한차분법을 이용하는 방법이 주종을 이루고 있다. 불연속체 모델은 개별 블록들의 움직임을 일일이 계산하므로 매우 매력적인 방법이지만 현재의 지반조사 기술수준으로는 지반내의 절리발달사항을 정확히 파악하기가 매우 어려우며, 컴퓨터의 계산용량이 너무 과다해지는 단점이 있다. 따라서, 불연속면을 포함한 암반을 연속체로 가정한 편재절리 모델(ubiquitous joint model)을 이용한 연구가 요구된다. 한편, 터널의 경우는 사면의 경우와는 달리 파괴면의 형상을 사전에 가정하기 어렵기 때문에 한계평형법에 기초한 해석법 등을 적용하여 안전율을 구하기가 곤란하다. 이러한 이유에서 터널을 대상으로 한 수치해석은 안전율을 구하기보다는 안정성을 평가하는 데만 제한적으로 사용되어 왔다. 본 논문에서는 편재절리모델을 이용한 절리암반터널의 거동 평가기법과 수치해석에 의해 터널의 안전율을 구하는 방법을 제시하는 데에 그 목적이 있다. 이를 위해 터널의 안전율 구하는 방법을 강도감소기법에 근거하여 제시하였다.

• Journal of the Korean Geographical Society
• /
• v.35 no.2
• /
• pp.189-205
• /
• 2000

북한강 지류 홍천강은 중류구간과 하류구간의 하천 형태가 대조적이다. 홍천강의 중류는 단층선을 따라 직선상으로 남서류하고, 하류는 감입곡류 구간으로 서류하여 북한강에 합류한다. 유역분지의 기반암은 중류구간의 서쪽과 하류구간은 편마암, 중류구간의 동쪽은 화강암이며, 상류구간은 변성암과 화강암이 혼재한다. 하안단구는 중류구간 유로의 양안에서 넓게 분포하며, 하류구간에서는 감입곡류의 활주사면에 좁게 나타난다. 이러한 특징은 지질구조선의 존재, 중류와 하류의 지질 특성과 이에 따른 유로 발달의 차이에 기인한다. 화계분지는 중류구간의 가장 하류쪽에 위치하는데, 분지 내에는 고도를 달리하는 여러 단의 하안단구가 분포한다. 즉, 화계분지에서는 과거 여러 번에 걸친 유로변경과 이로 인해 곡류절단이 이루어졌다. 이는 변성암으로 이루어진 홍천강 하류의 좁고 깊은 하곡이 국지적인 침식기준면으로 작용하여 중류에서 하류로의 곡류대 이동이 방해받았기 때문이다. 하안단구의 형성시기는 기존의 연구결과와 비교할 때, 저위 I면과 저위II면이 각각 Early Wurm 빙기와 Late Wurm에 대비되는 marine oxygen isotope stage 4와 2 시기에, 중위면은 Late Riss에 해당하는 marine oxygen isotope stage 6에 형성된 것으로 추정된다.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.25-38
• /
• 1996

To investigate the stability problem of irrigation-drainage channel excavation slope on soft ground, analyzed the behavior of the soft ground with excavation slope by the limit equilibrium method and the finite element method, and compared with field tests. The results of this study were summarized as follows; 1. When rapid drawdown the water level, the crack was occurred by the effect of the excess pore water pressure, and the pore water pressure was decreased slowly. 2. As the width of excavation was larger, the crack width was larger. And, excavated depth was deeper, the progressive failure was appeared. 3. When the soft ground excavation was small-scale, the minimum safety factor was more effected by cohesion(1.0, 1.5, 2.0, 2.5, 3.0) than excavated slope inclination(1:l, 1:1.5, 1:2). 4. As excavation was progressed, the settlement occurred on the top-slope due to plastic domain, and heaving was occurred at the bottom of excavation. 5. The maximum shear stress was appeared greatly as the base part of slope went down. Because of the increase of the maximum shear stress, tension area occurred and local failure possibility was increased. 6. As the excavation depth was increased, the maximum shear strain was appeared greatly at the base of slope and distribution pattern was concentrated beneath the middle of slope.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.137-150
• /
• 2002

Recently, plane failure mode occurred frequently along the bedding plane having low angle dip about 20 degree when cutting slopes were constructed in sedimentary rock region of the Gyeongsang Basin. Landslide of the Whangryeong Mountain which was occurred at Busan Metropolitan City in 1999 belongs to the category mentioned above. Reconstruction for cutting slope of the Whangryeong Mountain has finished in 2000 and final grade of reconstructed cutting slope is 1:2.0. To analyze slope failure mode for landslide of the Whangryeong Mountain, various analyses were performed such as in-situ investigation and test, drilling, laboratory test, aerial photograph interpretation, X-ray diffraction analysis, and slope stability analysis using Stereographic Projection and Limit Equilibrium methods. As the result, it is identified that tension cracks had been developed one year before the landslide took place. The tension crack semis to be formed by merging several joint sets. It appears that failure blocks broke down along the sliding planes of different layers. Risk of plane failure is conformed as a result of stability analysis using Stereographic Projection and Limit Equilibrium methods in case that greenish gray tuffaceous shales, regared as sliding planes, are weathered. From now on, a detailed investigation is needed for the thin layers which is sensitive to weathering, and stability analysis for this layer is performed at cut slope construction site having similar geological condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.194-194
• /
• 2023

세류침식은 급경사 나지사면에서 증가하는 지표흐름에 의해 빈번하게 발생하고, 과도한 토사유출로 인해 홍수 및 토사재해 위험 증가와 수질오염 등의 문제를 야기한다. 본 연구는 개발지역의 마사토를 활용하여 1.2 m × 5.5 m 규모의 3개 중규모 플롯에서 세류발달 특성, 유출 및 토사유출량을 파악하고자 강우와 유입수 모의실험을 수행하였다. 경사 조건 15°와 20°에서 유입수 유무에 따른 4회의 반복실험이 진행되었으며 마사토의 평균입경은 0.89 mm이다. 강우강도 범위는 90~140 mm/hr이며, 유입수 유량은 합리식으로 계산하였으며 100~130 ml/sec이다. 하천 차수분석방법인 Horton방법을 사용하여 세류별 차수를 나누었다. 세류절개는 유입수가 없는 경우 실험 시작 약 1분 후에 발생하였고, 최대 2차수까지 세류가 발달하였으며, 유입수가 있는 경우 약 30초 후 발생하였고, 최대 3차수까지 세류가 발달하였다. 세류발달에 대한 수리학적 특성을 파악하기 위하여 염료 추적방법에 의한 동영상 이미지 분석결과 유속은 0.06~0.43 m/s의 범위를 보였다. 유입수와 강우가 함께 공급되는 경우 강우모의 공급수량에 비해 1.32~1.69배 증가했고, 이에 따라 지표유출수는 1.13~3.93배로 증가폭의 범위가 넓었다. 세류발달에 의한 토사유출량은 유입수 유무에 따라 6.7~32.3배로 증가하였다. 결론적으로 강우와 유입수가 상호작용하는 경우 강우에 의한 박리현상보다 유입수에 의한 측벽붕괴 활동이 활발하게 진행되었고 이는 세류 발달 과정에서 지배적으로 이루어졌기 때문으로 판단된다.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2010

This paper deals with the classification and distribution of geomorphic surfaces and analysis on effects of geomorphic processes on the landforms in the inaccessable DMZ (Demilitarized Zone) to Wonsan Bay of East Sea coast of Chugaryeong Rift Valley, Central Korea. DEM (Digital Elevation Model) and Landsat images are used for the above anlaysis. The geomorphic surfaces are classified by TPI (Topographical Position Index) for the analysis of the convexity and concavity calculated using topographical elements such as elevation, steepness, and relief. In the Chugayreong Valley, 10 geomorphic surfaces are classified as steep valley, shallow valley, upland drainage, U-shaped valley, plain, open slope, upper slope, local ridge, midslope ridge, and high ridge. Zonal Statistics presents average characteristics of geomorphological processes of surfaces by the relationships between bedrock and relief, surface and relief, and between surface and NDVI. So, these analysis can help to understand geomorphological process such as dissection of lava plateau and watershed divide evolution.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.443-453
• /
• 2006

Using seismic profiles obtained in the Antarctic Peninsula continental margin around Smith Island located at the southwestern end of the South Shetland Islands, we investigated sediments distribution, sedimentation, continental shelf formation, and tectonic evolution history. The study area is a very unique area that has two tectonic provinces with a tectonic boundary near Smith Island just the landward projection of the Hero Fracture Zone (HFZ). To the southwest of the Island, the margin became inactive margin after the collision of the ridge crest of the Antarctic-Phoenix ridge and trench, whereas to the northeast the margin is still apparently active margin with the spreading center and trench morphology in the sea. Generally the northeastern margin has the shelf sedimentary basins wth thick sedimentary layers, well-developed forearc basin, broad continental slope and distinct trench morphology, and the southwestern margin is characterized by steep and narrow continental slope and localized shelf basins. the mid-shelf basement high structures are distinct in the southwestern margin, which are thought to be formed by thermal effect caused by the subducted spreading centers. The high is observed in the area just northeast of the Island, implying that the tectonic boundary along the landward projection of the HFZ is not sharply defined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2018

Levee breaches can result from flooding due to torrential rainfalls, which are linked with recent abnormal climates and the aging of river levees. Breaches have caused enormous property damage and human casualties in lowland areas. Overtopping was found to be the cause for approximately 40% of all cases of breach. In this study, the reasons and mechanisms behind levee breaches were analyzed using hydraulic model testing. The overtopping stability and time delay effect of breaches were assessed for levees made with a new environmentally friendly substance. Image analysis revealed that the total breach time of the levees made with the new substance was about 2.25 times greater than that of an earthen levee. The initial breach rate of a general earthen levee was about 1.43 times higher than that of levees covered with the new substance, and the body collapsed rapidly. The breach mechanisms of levees covered with the new substance were completely different, and it is possible to prevent rapid breaches by mitigation of the breach speed on the slope by resisting overtopping.