• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.67-77
• /
• 2010

Growth of oil and chemical industries has been remarkable during recent years. Hazardous materials (Hazmat) make frequent use in the wide range of industries. It increases the frequency of Hazmat transport and it leads to increase the number of accidents. Optimal Hazmat routes can reduce damage. Thus, the objective of this study is to minimize the areas impacted by Hazmat accidents by adopting experts' opinion in planning the route. We calculated weights using AHP (Analytic Hierarchy Process) and deduced the best route by applying this weights. Results showed that in the case of shortest route versus weighted route, the percentage of population damage has been decreased by 33.4% in the comparison between shortest route and optimally weighted route. And the percentage of environmental damage also has been decreased by 21.8%. Social damage has been decreased by 1521.7%. In the case of none weighted route versus weighted route, the percentage of population damage has been decreased by 2.6% when we adopted weighted route. Consequently, the recommended route with weighted risk assessment avoids densely populated area comparing with none weighted route. Further research needs to be carried out in order to figure out the specific cost-effectiveness analysis applying the equal cost unit for each factor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.1-12
• /
• 2015

Length and the number of tunnels has increased 10% annually. Tunnel construction has positive effect in nature and driving condition. However, the structure of tunnels lead to a greater probability of major accidents. For this reason, tunnel is focusing its attention on the rapid incident handling and disaster management to build a tunnel management system in recently. In this study, tunnel management system adequacy analyzed in terms of operational safety using IPA and AHP analysis. IPA analysis results using the portfolio chart, incident management factors has a large gap between important and satisfaction. Disaster management is analyzed high ranking in priority. However, incident management factors are derived first priority in AHP analysis. This study determined that the results are meaningful to practitioners in the field is determined. In addition, practitioners comments should be reflected primarily for tunnel operational safely.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.241-246
• /
• 2008

he purpose of this study was to examine the awareness of dental hygienists about medical malpractice and dispute. The subjects in this study were 206 dental hygienists at dental clinics, on whom a survey was conducted. After SPSSWIN 14.0 program was utilized to analyze the collected data, the following findings were given: 1. As for experiences of being complained from patients by age, the dental hygienists who were at the age of 21 to 23 made up the largest age group (39.2%) who had ever meet patients who had grievances. By career, those who had worked for less than a year constituted the greatest group (30.4%) who had the same experiences. It indicated that the dental hygienists who were younger and had a less career had been more complained from patients. 2. In terms of problems posed by patients, scaling came into question the most (14.5%), followed by diagnosis (14.4%), impression (12.9%) and radiography (11.0%). 3. Regarding perception of scaling treatment, 90.8 percent, the greatest percentage, kept records of patients about scaling. As to how to do that, 34.5 percent, the largest percentage, wrote it down and then signed their name. Concerning the way of explaining how to take care of oral health, 82.5 percent gave an explanation without any prints. 4. As to knowledge on the medical law, they got a mean of 12.34 out of possible 16 points. 5. Concerning the necessity of education about the prevention of medical accidents and countermeasures, 70.4 percent felt the strong and urgent need for that.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.16-21
• /
• 2014

In recent, the maritime traffic has increased with an increase in international trading volumes and the growing popularity of marine leisure activities. As increasing of maritime traffic, marine accidents happened continually and there are possibilities of accidents at sea. According to the analysis of marine accidents, most accidents occurred by human error of seafarers. To reduce the accidents by human error, the various assistance system for assist seafarers have been proposed. It is required to real-time data management method for applying to real-time system, but most proposed assistance system used off-line data for analysis. In this paper, we aim to build a navigation supporting system for providing safety information to deck officer with data of AIS(Automatic Identification System) and ARPA Radar(Automatic Radar Plotting Aids Radar), and proposed a management algorithm for real-time ship information with blackboard system and verified the validity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.874-880
• /
• 2019

Korea entered the aging society in 2000 and has been officially classified as an aged society as of 2019. As a result thereof, the number of aging seamen and the number of marine accidents of aging crews have consistently increased every year. The aging of drivers, in the relam of road traffic, is the same as those in the field of shipping. However, research and policy-making to solve these problems in the realm of road transportation are more active than in the shipping field. Therefore, this study is aimed at finding education methods for reducing traffic accidents by old aging drivers and determining the benchmark in terms of maritime education. In the area of domestic and foreign road traffic, traffic safety education for older aging drivers is implemented as a way to reduce the causes of human factors in traffic accidents. This study analyzed the current situation of the maritime education field and combined it with the solution in the field of road traffic. First, it is deemed necessary to implement professional license acquisition education. Second, job refresher training for the renewal of the license for aging seamen has to be implemented. Lastly, it is imperative to implement the age transition education for aging seamen. This study, however, is limited to determining the improvement plan for maritime education in relation to aging seamen. Therefore, it is necessary to investigate varying studies in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.81-90
• /
• 2018

The purpose of this study is to evaluate the effect of downward speed limit of urban arterial roads at 29 sites in Busan Metropolitan Police Agency to reduce road traffic accidents from '10 to '15. As a result of analyzing the traffic accidents occurred for 1~3 years after the decrease in the speed limit, the number of traffic accidents decreased by 3.09% and the number of injured persons decreased by 8.76%, but the number of deaths decreased by 36.73% The results of this study are as follows. The average speed reduction rate of 6.31km/h was decreased by investigating the change of the vehicle speed before and after the downward speed limit, and the change of average speed was statistically significant in most of the sections. The rate of compliance with the speed limit increased by 10.26% p, which is considered to have greatly improved overall traffic safety. A survey conducted by residents near the target area with a lower speed limit showed that 57.9% of the respondents felt the driving speed of the vehicle was lowered. However, this project was focused on vehicles with limited speed road signs and traffic safety signs, Only 25.8% of respondents said walking safety was improved. In the future, it is necessary to consider the safety of pedestrians by improving roads around roads such as road curvature and separation. In addition, there is a clear positive result in terms of decreasing the fatal accidents in the downward speed limit zone of Busan Metropolitan Subway. However, more detailed analysis is needed for the 29 accidents. Therefore, it is expected that traffic practitioners will be able to utilize it as a basis to increase the accident reduction effect by setting an appropriate speed limit based on the easy and objective grounds.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.68-80
• /
• 2016

Interest in freeway truck traffic has increased largely due to greater safety concerns regarding truck-related crashes. The negative interactions between slow-moving trucks and other vehicles are a primary cause of hazardous conditions, which lead to crashes with larger speed variations. To improve operational efficiency and safety, providing a climbing lane that separates slow-moving trucks from higher performance vehicles is frequently considered when upgrading geometrics. This study developed an operations strategy for freeway climbing lanes based on traffic conditions in real time. To consider traffic safety when designing a dynamic strategy to determine whether a climbing lane is closed or open, various factors, including the level of service (LOS) and the percentage of trucks, are investigated through microscopic simulations. A microscopic traffic simulator, VISSIM, was used to simulate freeway traffic streams and collect vehicle-maneuvering data. Additionally, an external application program interface, VISSIM's COM-interface, was used to implement the proposed climbing lane operations strategies. Surrogate safety measures (SSM), including the frequency of rear-end conflicts and, were used to quantitatively evaluate the traffic safety using an analysis of individual vehicle trajectories obtained from VISSIM simulations with various operations scenarios. It is expected that the proposed algorithm can be the backbone for operating the climbing lane in real time for safer traffic management.

• The Journal of Bigdata
• /
• v.3 no.2
• /
• pp.19-33
• /
• 2018

Owing to the increase of FTA, food trade, and versatile preferences of consumers, food import has increased at tremendous rate every year. While the inspection check of imported food accounts for about 20% of the total food import, the budget and manpower necessary for the government's import inspection control is reaching its limit. The sudden import food accidents can cause enormous social and economic losses. Therefore, predictive system to forecast the compliance of food import with its preemptive measures will greatly improve the efficiency and effectiveness of import safety control management. There has already been a huge data accumulated from the past. The processed foods account for 75% of the total food import in the import food sector. The analysis of big data and the application of analytical techniques are also used to extract meaningful information from a large amount of data. Unfortunately, not many studies have been done regarding analyzing the import food and its implication with understanding the big data of food import. In this context, this study applied a variety of classification algorithms in the field of machine learning and suggested a data preprocessing method through the generation of new derivative variables to improve the accuracy of the model. In addition, the present study compared the performance of the predictive classification algorithms with the general base classifier. The Gaussian Naïve Bayes prediction model among various base classifiers showed the best performance to detect and predict the nonconformity of imported food. In the future, it is expected that the application of the abnormality detection model using the Gaussian Naïve Bayes. The predictive model will reduce the burdens of the inspection of import food and increase the non-conformity rate, which will have a great effect on the efficiency of the food import safety control and the speed of import customs clearance.