• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.579-584
• /
• 2014

고속 열차의 속도가 점점 빨라짐에 따라 고속 열차 주행 시 발생하는 여러 공력적인 문제가 대두되고 있다. 그 중 고속 열차와 전력선을 이어주는 판토그래프에서의 소음 발생과 압상력 불안정 문제가 중요시 되어왔고 이에 대한 여러 선행연구가 진행되고 있다. 지금까지의 선행 연구는 원형, 사각형, 에어포일과 같이 기본적인 형상을 이용한 판토그래프 팬헤드의 최적 단면 형상을 찾는 데에 초점을 맞추고 있다. 본 연구는 이러한 주류의 접근 방식에서 벗어나 팬헤드에 구멍을 추가하여 그 효과를 보는 다양한 시도를 해보았고 구멍이 소음 발생과 압상력 불안정에 미치는 영향에 대하여 연구하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.12 s.105
• /
• pp.1398-1407
• /
• 2005

This paper is concerned with the vibration analysis of a rectangular plate with a rectangular hole. Even though there have been many methods developed for the addressed problem, they suffer from computational time. In this paper, we developed a new methodology called Independent Coordinate Coupling Method which can couple two independent coordinate systems for the entire plate domain and the hole. By matching the deflection condition imposed on the expressions, the relationship between the global axes and the local axes is derived. This formula is then used for the calculation of the eigenvalue problem. The numerical results show the efficacy of the proposed method.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.291-297
• /
• 2008

The purpose of this study is to optimize a parallel-hole collimator for small gamma camera having the pixellated crystal array and evaluate the effect of crystal-collimator misalignment on the image quality using a simulation tool GATE (Geant4 Application for Tomographic Emission). The spatial resolution and sensitivity were measured for the various size of hexagonal-hole and matched square-hole collimators with a Tc-99m point source and the uniformity of flood image was estimated as a function of the angle between crystal array and collimator by misalignment. The results showed that the spatial resolution and sensitivity were greatly improved by using the matched collimator and the uniformity was reduced by crystal-collimator misalignment.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.121-129
• /
• 1994

The Finite Element Method(FEM), which is existing stress analysis method, requires substantial amounts of efforts for analysis of perforated plates. An equivalent solid plate analysis method is developed in this paper. A perforated plate is assumed to be an equivalent solid plate in this method. Stress analysis is performed for this equivalent solid plate using effective material properties, and then these stresses are converted to the actual stresses of the original perforated plate. A case study is conducted for a rectangularly arrayed perforated plate using the proposed method in this paper. Compared and analyzed with respect to those calculated by the existing stress analysis method, the result seems to be satisfied in terms of its practicality and more conservative with respect to margin in design application.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.49-50
• /
• 2006

Photoelasticity is widely and conveniently used methods for whole field stress analysis. In this paper, 8-step photoelastic phase shifting method was performed by using a multi-purpose polariscope to measure the fringe orders along a specified line on the specimen containing a square hole. The material of the specimen is made of Polycarbonate. The measurement results by 8-step phase shifting method were compared with the those calculated by ABAQUS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1229-1234
• /
• 2006

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Ravleigh-Ritz method based on Donnel-Mushtari shell theory. The boundary conditions at both ends were assumed to be shear diaphragm. To verify the theoretical results, a cylindrical shell structure made of aluminum was built ana tested by using impact hammer. Experimental results show that there are little discrepancies compared to theoretical results because of the boundary conditions at both ends. The MFC actuators were glued to the cylindrical shell in longitudinal and circumferential directions. The PPF controller were designed for lowest two modes and applied to the MFC actuators. The experimental results show that vibrations can be successfully suppressed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1664-1670
• /
• 2015

As journal bearing has a sliding motion between the shaft and bearing with lubricating oil, it produces a hydrodynamic lubrication condition. Journal bearing can receive a large force because it takes a distributed load at the large friction face. As the oil groove or oil hole is made in the journal bearing surface for the journal bearing smoothly working under a hydrodynamic lubrication condition, sufficient lubricating oil is supplied through the clearance of journal bearing. The performance of the journal bearing is changed according to the shapes, sizes and positions of an oil groove. In this paper, the flow rate according to the oil groove shapes (triangle, semicircle and rectangle) among the various oil supply conditions was measured. The shape that discharges the highest flow rate was observed and the groove shape of optimal performance for the journal bearing was determined. The results showed that the flow rate increases with decreasing operating temperature, the influence of temperature on the flow rate decreased with increasing rotational speed, and flow rate in the triangular groove shape was greater than in other shapes.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.670-676
• /
• 2016

In this study, we analyzed the utensils, covers and mats that were used for making meju, the shape of meju, and the heating method used for making meju from the 225 ways of preparing jang mentioned in the 32 volumes of the ancient cook books from 530 AD to 1950. The heating method of traditional meju bean and starch included 57 kinds of steaming, 59 of boiling, 21 of roasting + boiling, and 2 of cooking. The shape of meju included 41 kinds of egg, 27 of ball, 22 of lump, a kind of doughnut, 8 kinds of hilt, 6 of flat, 4 of chip, and a kind of square. Among the 72 gochoojang meju, the heating method of bean included 9 kinds of boiling, and 6 kinds of steaming; whereas the heating method of starch included 19 kinds of steaming of dough, 11 of rice cooking, and 5 of boiling of dough. The utensils for molding of bean meju were 49 kinds of straw sack, 14 of round straw container, 11 of heating bed, 7 of large straw bowl or Japanese-snailseed, 5 of jar, 4 of ditch, 3 of straw bowls, 2 of pottery steamer of dough, 2 of gourd, and a kind of long round bamboo bowl and sack of straw. The cover and the mat used for molding of meju included 36 kinds of straw, 17 kinds of paper mulberry leaf, 15 of wide straw seat, 14 of mugwort, 11 of pine tree leaf, 10 of soybean leaf, 6 of cocklebur leaf, 6 of sumac leaf, 6 of barley straw, 6 of mulberry leaf, 5 of fallen leaf, 5 of cogon grass, 4 of reed seat, 3 of scrap of cloth, 2 of Indian bean tree leaf, a kind of reed. There were only 5 kinds of hanging.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.389-403
• /
• 2008

Seed morphological studies of 12 species of sect. Zygophyllidium and related Poinsettia using light and scanning electron microscopy were conducted to test the hypotheses of the sectional boundaries and species relationships. Characteristics of seeds, and the keys of identification of 12 species were presented. Seeds of 12 species were divided into 6 types based on the UPGMA tree from numerical analyses using nine seed characters. Type I, including E. uniglandulosa, is characterized by the foveolate seed with granulate testa cells. Type II, including species E. exstipulata, E. lagunensis, E. bilobata, E. hexagonoides and E. chersonesa, was recognized by the presence of inter-cellular granules among testa cells. Type III, including E. cyathophora, has a seed with acute apex, and concentric circles on the surface of testa cells. Type IV, including species of E. dentata and E. pentadactyla, has a seed with caruncle and lacking inter-cellular granules among testa cells. Type V, including E. hexagona, was characterized by the ovate seeds and lacking inter-cellular granules. Type VI, including E. eriantha and E. lacera, was recognized by the seeds with rectangular shape with caruncle. Based on the seed morphology, sect. Zygophyllidium should be defined only species with E. exstipulata, E. lagunensis, E. bilobata, E. hexagonoides and E. chersonesa. E. hexagona, traditionally included in this section, was closely related to E. dentata from Poinsettia.