• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.397-397
• /
• 2012

본 연구는 LED의 광추출 효율을 높이기 위해 다양한 모양의 다각형을 이용해 광추출 효율 및 전류주입 효과를 연구하였다. 우리는 기존의 사각형 LED와 삼각형, 마름모, 오각형, 육각형, 원형의 모양을 최대한 같은 면적을 같게 하여 각 모양에 따른 광추출 효율이 어떻게 변하는지 연구하였고 또한, 각각의 모양에 대하여 전극 모양을 다르게 하여 각 모양의 전극 구조를 시뮬레이션과 실험을 통하여 원인 규명 및 최적의 구조를 도출하였다. 각 모양에 대한 광추출 효율은 lighttools와 Ratro 시뮬레이터를 이용하였고 전극 모양은 SpeCLED를 통하여 실험값과 비교하였다. 각 모양의 사이즈는 사각형 $500{\times}1,000{\mu}m$의 면적으로 최대한 동일하게 제작하여, 수평형 칩을 제작후 패키지 하여 적분구 측정 및 고니오미터 측정을 통해 총 광량 및 지향각에 따른 광추출 효율을 비교 하였다. 또한 전극모양에 따라 변화하는 I-V 특성분석 및 다양한 전기적 분석을 통하여 최적의 다각형 구조를 도출하였다.

• Communications of Mathematical Education
• /
• v.20 no.3 s.27
• /
• pp.469-482
• /
• 2006

It ill give much interest both to the teacher and student that paper crane makes interesting mathematical investment possible. It is really possible for the middle school students to invest mathematical activity such as the things about triangle and square, resemblance, Pythagorean theorem. I reserched how this mathematical investment possible through folding and unfolding paper crane and analyzed the mathematical meaning.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.83-93
• /
• 1995

A numerical and experimental investigation on the flow characteristics in the rectangular duct of an MHD propulsion system has been carried out. In numerical analysis, three-dimensional, steady-state, viscous, incompressible electrically conducting fluid flow under the influence of uniformly applied magnetic and electric fields was treated using a finite-difference technique. It was found from the numerical study that when the Lorentz force is weak, the typical parabolic velocity profile under a laminar flow condition changes to an M shaped profile near the electrode region and that the pressure increases linearly from the inlet toward the outlet of the MHD duct under constant electro-magnetic field. In experiment, thrust of the MHD propulsion system can be controlled easily by varying electrode current. The measured pressure gradient along the MHD duct is proportional to the Lorentz force, which is in agreement with the numerical results.

• Communications of Mathematical Education
• /
• v.31 no.2
• /
• pp.223-239
• /
• 2017

In this paper, it is aimed to design the teaching units 'Inquiry into the isoperimetric problem of triangle and quadrilateral' to give elementary gifted students experience of mathematization. For this purpose, the teacher and the class observer (researcher) made a discussion about the design of the teaching unit through the analysis of the class based on the thought processes appearing during the problem solving process of each group of students. The following is a summary of the discussions that can give educational implications. First, it is necessary to use mathematical materials to reduce students' cognitive gap. Second, it is necessary to deeply study the relationship between the concept of side, which is an attribute of the triangle, and the abstract concept of height, which is not an attribute of the triangle. Third, we need a low-level deductive logic to justify reasoning, starting from inductive reasoning. Finally, there is a need to examine conceptual images related to geometric figure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.234-237
• /
• 1998

PCS망에서는 가입자의 이동성으로 인하여 가입자가 휴대하고 있는 MS(Mobile Station)의 위치가 계속적으로 변하므로, 착신호 연결을 위해 시스템에서는 가입자의 위치에 대한 정보를 관리해야만 한다. 위치등록(location registration)이란, 가입자의 위치정보가 변하는 경우 시스템의 데이터베이스에 있는 가입자의 위치정보를 갱신해 주는 일련의 과정을 말한다. 본 연구에서는, MS가 일정 개수 이상의 셀을 통과하면 위치등록을 수행하는 이동기준 위치등록(movement-based registration, MBR) 방법을 고려한다. 또한 전체 페이징 영역을 몇 단계에 걸쳐 페이징할 수 있는 선택적 페이징 (selective paging) 방법을 고려한다. 본 연구에서는, 사각형 셀 환경을 가정하여, 기존의 방법과는 다른 페이징 영역을 제시하고 이 경우 무선 채널에서의 신호 트래픽 관점에서 기존의 방법에 비하여 우수함을 보이고자 한다.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.27-31
• /
• 2002

Output factors for 6MeV electron were directly measured under the condition of an individual beam cutout and these factors were compared with the output factors by 1D method which is an easy means to predict the output factors of electron beam. Output factors by 1D method are defined as output factors of rectangular fields where one side is always equal to the side of the square reference field and the output of an arbitrary rectangular field X, Y is given by the product of the 1D output factors. The output of very large square fields is overestimated using 1D method for the 6MeV electron, but it results in agreement with measured data under the condition of an individual cutout within 1% error adopting a correction factor $CF=C\times$[(X-10)(Y-10)/$\mid$(X-10)(Y-10)$\mid^{1/2}]$.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.86-91
• /
• 2016

Convenient design guideline for Waveguide-below-cutoff (WBC) array is proposed to obtain the minimum waveguide length for electromagnetic pulse (EMP) shielding. The analysis includes circular, rectangular, and hexagonal WBC, determine the total length of the waveguide. When the unit side of rectangular WBC and the diagonal line of hexagonal WBC are given as 30 mm, the length of hexagonal WBC is 5 mm shorter than rectangular case with shielding effectiveness (SE) 80 dB. The length difference is deepened with SE of 100 dB, which shows approximately 30 mm shorter length for hexagonal case than others. In addition, hexagonal WBC requires much shorter length than circular WBC. In conclusion, hexagonal case is the most effective with respect to flow velocity and pressure loss for equivalent SE.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.450-454
• /
• 2015

In this paper, when points with weights are given in a plane, for an arbitrary constant r, we shall find a square area S such that the sum of weights of points belonging to S is maximized. If the length of the side of S is not given, the problem to find arbitrary rectangular area has been studied. In this paper, we will consider the problem to find a square area with a side of a length r when a constant r is given. We will solve the one dimensional problem in dynamic environment and propose an algorithm with the time complexity of O(nlogn+rn).

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.333-339
• /
• 2017

최근에는 항공기의 임무 형태나 주위 환경에 따라 변할 수 있는 passive morphing airfoil에 대한 연구가 활발히 이루어지고 있다. 하지만 복잡한 모델링, 실험 과정 및 긴 해석 시간 때문에 아직 여러 chiral 구조를 체계적으로 비교하지 못 하고 있다. 본 논문에서는 이러한 chiral meso structure 중 하나인 Anti-Tetra Chiral 구조를 Hooke's law에 기반을 두어 등가 물성치를 구해보고, 사각형 모양의 연속체 요소로 등가 모델링을 하였다. 그 후, airfoil 내부에 연속체 요소를 직접 적용하여 실제 모델링한 경우와 비교해 본 결과 경향성 파악에 충분한 오차 범위를 얻을 수 있었다. 이를 통해 여러종류의 Chiral meso structure과 기하학적 변수를 적용한 에어포일을 효율적으로 해석할 수 있음을 제시할 수 있다.