• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.383-391
• /
• 2014

In order to detect underwater acoustic signals, various SONAR array types have been developed, including towed line array SONAR system (TASS). However, the TASS suffers from performance degradation which is caused by aperture deformation during a turn, because the TASS have a long-aperture array. A parabolic array model for turning TASS have been developed to solve the degradation problem occurred during a turn. In this paper, adaptive beamforming system is developed using the parabolic TASS model to cancel interference signals. The developed beamforming system is based on generalized sidelobe canceller (GSC) structure and self-tuning adaptive algorithm.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.274-280
• /
• 2020

In this paper, the effect of atmospheric turbulence is numerically modeled and analyzed via a phase-screen model, in regard to long-range optical energy transfer using coherent beam combination. The coherent-beam-combination system consists of three channel beams pointing at a target at a distance of 1-2 km. The phase and propagation direction of each channel beam are assumed to be corrected in an appropriate manner, and the atmospheric turbulence that occurs while the beam propagates through free space is quantified with a phase-screen model. The phase screen is statistically generated and constructed within the range of fluctuations of the structure constant Cn2 from 10-15 to 10-13 [m-2/3]. Particularly, in this discussion the shape, distortion, and combining efficiency of the 3-channel combined beam are calculated at the target plane by varying the structure constant used in the phase-screen model, and the effect of atmospheric turbulence on beam-combination efficiency is analyzed. Analysis with this numerical model verifies that when coherent beam combination is used for long-range optical energy transfer, the received power at the target can be at least three times the power obtainable by incoherent beam combination, even for maximal atmospheric fluctuation within the given range. This numerical model is expected to be effective for analyzing the effects of various types of atmospheric-turbulence conditions and beam-combination methods when simulating long-range optical energy transfer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.435-444
• /
• 2015

This paper specifies on a virtual array design of a 77 GHz vehicle radar for detecting a moving target at a time division transmit and a near range. The virtual array designed reduces a hardware complexity, weight and price. However, a synthesized beam of the virtual array has a high side lobe by a phase distortion of receive signals when the moving target is detected at the time division transmit. For this, a subarray receive signal with a same phase is used and the side lobe of the synthesized beam is suppressed above at least 10 dB. Also the virtual array has a beam distortion by a spherical wave when the vehicle radar operates at near range. So a boresight receive signal of each target range is compensated at each receive signal. Therefore the synthesized beam with compensation recovers a normal main lobe and improves the side lobe about 10~15 dB.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.40-47
• /
• 1989

For the effective design of a beam forming structure of the negative-ion-based neutral beam injector, a computer program based on a particle simulation model is developed for the calculation of charged particle motions in the electrostatic fields. The motions of negative ions inside the acceleration tube of a multiple-aperture triode are computed at finite time steps. The electrostatic potentials are obtained from the Poisson's equation by the finite difference method. The successive overrelaxation method is used to solve the matrix equation. The particle and force weighting methods are used on a cloud-in-cell model. The optimum design of the beam forming structure has been studied by using this computer code for the various conditions of elctrodes. The effects of the acceleration-deceleration gap distance, the thickness of the deceleration electrode and the shape of the acceleration electrode on beam trajectories are exmined to find the minimum beam divergence. Some numerical illustrations are presented for the particle movements at finite time steps in the beam forming tubes. It is found in this particle simulation modelling that the shape of the acceleration electrode is the most significant factor of beam divergence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.568-573
• /
• 2019

Modern Radars are evolving into MFRs which can search multiple targets simultaneously and then track them. Additionally they should be able to avoid some external jamming signals. Applying to these MFRs, Antennas should be able to perform DBF including to not only real-time beam steering but also multi-beam forming simultaneously. And they can cancel the beam at the specific direction. In this paper, we describe the implementation of sub-array type antenna hardware which can be applying DBF. Also we propose the modified amplitude aperture distribution for suppressing the side lobe level and explain the sub-array receiver design with amplitude tapering. It consists in making the amplitude weighting in 2 steps. In order to compare two weighting cases, we investigate the G/T performance for the array antenna. At the conclusion, we make a comparative study for the dynamic range of every sub-array receiver and present the hardware implementation that is more advantageous for sub-array alignment and calibration in DBF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.459-468
• /
• 2015

In this paper, we consider an uplink multiuser hybrid beamforming system where an access point (AP) communicates with multiple users simultaneously. The performance of the uplink multiuser hybrid beamforming system depends on the effective channel which is given by the product of the channel matrix and the analog beams. Therefore, to maximize the performance, we need to obtain the channel information and then select the analog beams appropriately by using the acquired channel information. In this paper, we propose the channel estimation method and low complexity analog beam selection algorithm for the uplink multiuser hybrid beamforming system. Additionally, our analysis shows that the proposed low complexity analog beam selection algorithm provides much less complexity than the optimum analog beam selection algorithm. From the numerical results, we confirm that the proposed low complexity analog beam selection algorithm has little performance degradation in spite of much less complexity than the optimum analog beam selection algorithm under the equal system configuration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.286-286
• /
• 2011

현재의 NEDO (New Energy and industrial technology Development Organization) style Si 정련은 두 단계로 구분되어 있다. 고출력 집속 전자빔을 이용한 금속 실리콘의 1차 용융과 대기압 근처의 플라즈마 아크 용해를 이용해서 B, P를 약간의 반응성 가스를 첨가 하여 제거하는 방법이다. 그러나 저가형 실리콘을 생산하려는 취지와 달리 두 가지의 고가 장비가 필요하다. E-beam melting 장치에서도 반응성이 높은 라디칼을 생성할 수 있다면 하나의 장비에서 두 가지의 정련 작업을 진행시킬 수 있다. 본 연구에서는 고진공에서(< 10-4 Torr) 동작하는 E-beam의 성능에 전혀 영향을 주지 않으면서 플라즈마를 용이하게 생성 시킬 수 있는 방법을 개발하고 이를 적용하여 실제 금속 순도 실리콘 내에 존재하는 B, P가 제거되는지 확인하는 것을 연구 내용으로 한다. 본 연구는 MG (Metal Grade) - Si 을 플라즈마 보조 전자빔 정련을 이용하여 정련한 Si 의 불순물 함량의 개선 효과를 조사하는 것이다. MG-Si 의 정련 방법 중에서 고출력 집속 전자빔을 이용하여 휘발성 오염물질을 제거 후, 플라즈마 아크 용해를 이용해서 B 를 제거하는 방법을 접목시켰다. MG-Si 에 DC power 와 전자빔을 집속시켜서 정련을 하면 챔버 내의 잔류 수증기가 플라즈마에 의해 분해되어 O를 생성하고, B와 반응을 하여 BO 형태로 제거가 된다. 방전 전압 700 V 와 전자빔 가속 전압이 4.5 kV, 방출 전류는 11 A, 진공 챔버 내의 압력은 $7.2{\times}10^{-4}$ Torr에서 정련을 진행하여 B를 제거했다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.107-107
• /
• 2009

모듈 형 터빈 다이아프람은, 아우터 링(outer ring), 스팀 패스(steam path)와 이너 웹(inner web)의 원형 형상을 갖는 세 부분을 조립하여 원주 방향의 용접 조인트를 형성하는 기존의 다이아프람 형태가 아니라, 아우터 슈라우드(outer shroud), 베인(vane)과 이너 슈라우드(inner shroud)의 세 부분이 하나의 모듈을 이루고 이러한 모듈을 원주 방향으로 조립하여 방사 방향의 조인트를 형성한다. 전자빔 용접은 이와 같은 방사 방향의 조인트를 수직으로 가로지르는 용접 궤적을 따라 진행되며, 용접 패스에 따라 형성되는 용융 비드의 단면적만큼 인접하는 두 모듈을 접합시킨다. 이 경우 용융 비드의 단면적과 형상은 두 모듈의 결합 강도를 결정하는 중요한 요소가 되어, 제작 시 다이아프람의 크기와 두께에 따라 용입 깊이와 평균 단면 비드 폭을 규정하고 있다. 본 연구에서는 용입 깊이와 단면 비드 폭의 요구 조건을 만족하면서 결함이 없는 건전한 용접부를 얻을 수 있는 최적 용접 조건을 도출하는데 그 목적이 있다. 이를 위해 플레이트 시편과 모듈 시편을 사용한 기초 실험과 유사 시제품(semi-mockup) 실험을 실시하였다. 플레이트 기초 실험을 통해 전자빔 주요 변수인 빔 전류, 초점 위치, 용접 속도, 빔 진동 폭 변화에 따른 용융 비드 형상 변화를 관찰하였고, 빔 전류가 용입 깊이에 가장 큰 영향을 주는 인자임을 확인하여 요구 용입 깊이 별 적정 빔 전류 값을 설정하였다. 용접 속도는 생산성 측면에서 균열이 발생하지 않는 범위에서 가능하면 가장 큰 값을 사용하였고, 빔 진동 폭은 초점 위치와 함께 단면 비드 형상 결정에 많은 영향을 주는 인자로 확인되어 균열이 없는 가장 이상적인 단면 비드 형상인 완만한 쐐기 형태가 되도록 설정하였다. 이 후 실제 제품 폭과 용접 패스를 갖는 블록 모듈 실험을 통해 설정 용접 변수의 적용성과 균열 발생 여부를 확인하였고, 이 때 적용 제품 폭이 30 mm 이하이며 요구 용입 깊이가 50 mm 이상의 경우에서 비드 중앙부 균열이 발생함을 관찰하였다. 따라서 해당 영역의 제품에는 균열 저항성이 높도록 용접 속도와 빔 진동 폭을 줄여 최적 용접 변수를 새롭게 설정하였으며, 이를 유사 시제품 실험에 적용하여 최종적으로 용접 변수 안정성을 검증하였다. 이러한 실험을 통해 확인된 최적 용접 조건을 실 제품 제작에 적용하여 모듈 형 터빈 다이아프람 전자빔 용접 제작을 성공적으로 완료할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.261-264
• /
• 2000

Continuous ND filters are fabricated on the silver halide photoplates. These filters enable us to get intensity modulated laser beam. Two kinds of continuous ND filters are fabricated. Optical density of one filter is increased radically and that of the other is decreased. In order to get a filter having desirable optical density, a mask which has reversed optical density has to be made. made.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1110-1116
• /
• 2021

In this paper, we propose a conformal Ku-band data link antenna to ensure low RCS of stealth UAV. As a phased array antenna with electrical beam steering function, a transmitter and a receiver were designed and manufactured for FDD communication, respectively. Each antenna is designed as a 12*12 planar array antenna and has a function to form a uni-directional pattern and a bi-directional pattern through phase control of unit elements. The beam steering range is designed to be able to steer up to 60 degrees in theta direction and 360 degrees in the phi direction. As a result of manufacturing and measurement, the conformal type radome has low transmission loss and meets the required specifications including system performance. The feasibility of mounting the stealth UAV has been confirmed, and future research directions such as interworking of baseband devices and conversion to digital beam steering function are suggested.