• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.179-190
• /
• 2020

In this paper, we estimated the Direction of Arrival (DOA) using Conventional BeamForming (CBF), adaptive beamforming and compressive beamforming. Minimum Variance Distortionless Response (MVDR) and Multiple Signal Classification (MUSIC) are used as the adaptive beamforming, and grid-free compressive sensing is applied for the compressive sensing beamforming. Theoretical background and limitations of each technique are introduced, and the performance of each technique is compared through simulation and real experiments. The real experiments are conducted in the presence of reflected signal, transmitting a sound using two speakers and receiving acoustic data through a linear array consisting of eight microphones. Simulation and experimental results show that the adaptive beamforming and the grid-free compressive beamforming have a higher resolution than conventional beamforming when there are uncorrelated signals. On the other hand, the performance of the adaptive beamforming is degraded by the reflected signals whereas the grid-free compressive beamforming still improves the conventional beamforming resolution regardless of reflected signal presence.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.851-868
• /
• 2015

A radio telescope which has been dominantly used for millimeter and submillimeter wave radio astronomy is a cassegrain antenna. A various receivers with specified observing bandwidths are installed on cassegrain antenna so as to carry out to investigate a diverse radio astronomy. A beam guiding system should be required so that a various receiver can be conducted their own observational frequency bands. The beam guiding system based on Gaussian beam transmission theory consists of quasi-optical circuit used such ellipsoidal mirror, dielectric lens and feed horn. In this paper, not only Gaussian beam transformations based on Gaussian beam theory are presented, but also design techniques for quasi-optical circuit are given. By using proposed design techniques, both Gaussian beam quasi-optical circuits to be used for cassegrain antenna and design results are also described. Properties of key focusing elements such ellipsoidal mirror and dielectric lens and feed horn are also discussed. It is expected that beam guiding system to be applied cassegrain antenna could be easily designed by using proposed design techniques.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.20-30
• /
• 1999

We have made the single side hand filter for the dual channel receiver which is a heterodyne receiver to observe the cosmic radio waves with 100GHz band ranged from 85GHz to 115GHz and 150GHz band ranged from 125GHz to 175GHz simultaneously. We have introduced the filter theory using the principle of the Martion-Puplett interferometer, which has the characteristics of rotated polarization. To reduce the loss of the transmission and beam coupling which are caused from the path difference associated with the intermediate frequency the design and the implementation have been intensely considered. The receiver needs two filters with different characteristics each other. Because each of them has the optimum positions as a function frequency at which the signal frequency is fed to mixer and the image frequency is rejected to the image termination load. The intermediate frequency and its band width have been also evaluated. We have measured the property of two filters using the vector network analyser and the beam measurement system which is made by us. The responses of the filter as a function of the position and the frequency are compared with the theory. It is shown that not only the measured values are very close to the theoretical values, but also the image rejection ratios are better than 22dB for both filters. Through successful observation using a dual channel receiver with two manufactured filters, the performance of the filters has finally verified.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.101-107
• /
• 2001

The objective of this paper is to present a method for designing robust positioning control systems of a flexible arm using mixed $H_2/H_{\infty}$ and $\mu$ theory. We begin with a description of the flexible arm based on the model identification method and discuss the derivation of the model uncertainty. The validity of the obtained model is confirmed experimentally. Next, a robust controller is designed based on the mixed $H_2/H_{\infty}$ and $\mu$ theory by which we can improve robustness of the entire system. On this occasion, we also propose a general plant formation suitable to mixed $H_2/H_{\infty}$ control and $\mu$-theory. Finally, the effectiveness of the proposed design method is verified through experimentation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.358-364
• /
• 2024

Type A carrier structures that support blocks or equipment gradually deform over time with load changes, reducing the area in contact with the block and changing the load pattern from distributed to concentrated during construction work in the shipyard. This phenomenon has the potential to misrepresent actual service loads. In particular, A carriers are often used by small manufacturers, who often do not have specialized engineering capabilities, necessitating the development of a method for easy calculation of carrier safe working load. This study proposes a quick evaluation method for the long-term safe working load of Type A carriers, to predict the plastic deformation and safety issues resulting from changes in load distribution. Based on the results of finite element analysis (beam and shell modeling) of the centralized load, beam-theory was modified to propose a method for determining the distributed load conditions of the A-carrier. In beam modeling, the theoretical value was multiplied by a correction factor of 0.73 for concentrated loads and 0.69 for distributed loads to obtain a safe working load. For shell modeling, a correction factor of 0.75 can be used for concentrated loads and 0.69 for distributed loads. This study can serve as a basis for improving the safety of shipbuilding, enabling quick and effective decisions for determining safe working loads in actual working environments.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.226-229
• /
• 2007

MgO 보호막은 플라즈마 디스플레이 패널(Plasma Display Panel, PDP)의 보호막으로 널리 쓰이고 있다. 본 실험에서는 산소 이온 빔 보조 증착(IBAD) 방법으로 형성된 MgO 보호막의 특성을 조사하였다. MgO 증착시 보조산소이온 빔의 에너지를 변화시킴에 따라 MgO 보호막의 특성과 PDP 패널 발광 특성에 미치는 영향을 분석하였다. 본 연구에서는 산소 이온 에너지가 300 eV 일때 소자의 방전개시 전압이 가장 낮게 나타났다. 또한 산소 이온빔의 조사에너지에 따라 MgO 박막의 결정성 및 표면조도가 크게 영향을 받는 것을 확인할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1998

For developing a beam shaping antenna, the circumference and the length of the vertical and horizontal elements of the Modified Transmission Line type Antenna(MTLA) are varied. The vertical radiation pattern of MTLA which has various shape was analyzed by the moment method in order to verify the beam tilt characteristics. From the analysis, it is confirmed that the condition of the maximum beam tilt is determined by the length of the vertical elements of the antenna. The antennal with the maximum beam tilt was designed and its input impedance and the radiation pattern was calculated theoretically and measured experimentally.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.57-62
• /
• 1996

ANSI N13.32는 손목팬텀과 손가락팬텀에서 말단선량계의 특성조사를 위하여 방향의존성인자를 선량계의 성능평가에 적용하도록 권고하고 있다. 본 연구에서는 말단선량의 정확한 선량평가를 위하여 ANSI N13.32에 제안된 팬텀과 동일하게 모사하고 그 팬텀내의 7mg/$\textrm{cm}^2$ 깊이에서 단일에너지를 가진 광자의 선량당량환산인자 및 방향의존성인자를 MCNP 전산코드를 사용함으로써 계산하였다. 또한 본 연구의 최종목적인 ISO Narrow X-선 빔에 의해 조사된 손가락팬텀에서 선량당량환산인자 및 방향의존성인자를 도출하였다. 전산 수행한 결과 낮은 전압에서 발생된 X-선 빔인 경우, 팬텀의 주축을 따라 수평회전각이 증가할수록 방향의존성인자가 크게 감소하며, 한편 높은 전압에서 생성된 X-선 빔인 경우, 수평회전각이 증가할수록 방향의존성인자간 처음에는 근소하게 감소하지만 90。까지는 증가하고 있음을 알 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.141-144
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 오랫동안 많은 연구자들에 의해 연구되어 왔다. 빔 형성 기법은 탐지성능에 직결되기 때문에 최적의 빔 설계는 중요한 문제가 된다. 그리고 최적의 빔 형성기를 구현하기 위해서는 개별 센서에 대한 가중회로의 구성이 필수적이며, 가중회로를 구성하기 위해서는 개별 센서에 대한 등가회로 모델링과 정합회로 설계가 필수적이다. 이전의 연구에서는 센서 등가회로 모델링 Tool과 정합회로 디자인 Tool 각각의 구성과 사용방법에 대해서 소개하였다. 본 논문에서는 이 두 가지 Tool을 모두 이용하여 센서 등가회로 및 정합회로를 모델링하였고, 이를 바탕으로 실제 가중회로를 구현하였다. 실험을 위해 물-공기의 상사효과를 가정하였으며, 공기 중에서 스피커 어레이를 이용하여 빔 형성을 하였다. 또한, 이론치와 실험치를 비교하여 BeamCAD, 센서 등가회로 모델링 Tool 그리고 정합회로 디자인 Tool로 이루어진 소나 센서 디자인 Tool의 타당성을 검증하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.463-466
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 오랫동안 많은 연구자들에 의해 연구되어 왔다. 빔 형성 기법은 탐지성능에 직결되기 때문에 최적의 빔 설계는 중요한 문제가 된다. 그리고 최적의 빔 형성기를 구현하기 위해서는 개별 센서에 대한 가중회로의 구성이 필수적이며, 가중회로를 구성하기 위해서는 개별 센서에 대한 등가회로 모델링과 정합회로 설계가 필수적이다. 이전의 연구에서는 센서 등가회로 모델링 Tool과 정합회로 디자인 Tool 각각의 구성과 사용방법에 대해서 소개하였다. 이 두 가지 Tool을 모두 이용하여 센서 등가회로 및 정합회로를 모델링하였고, 이를 바탕으로 실제 가중회로를 구현하였다. 가중회로는 정합회로와 트랜스포머로 구성된다. 본 논문에서는 이와같이 구성된 가중회로와 스케일 모델에 맞게 제작된 스피커 어레이를 이용하여 빔형성 실험을 하였으며, 그 결과를 이론치와 비교하였다. 이것을 바탕으로 BeamCAD, 센서 등가회로 모델링 Tool 그리고 정합회로 디자인 Tool로 이루어진 소나 센서 디자인 Tool의 타당성을 검증하였다.