• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.459-468
• /
• 2015

In this paper, we consider an uplink multiuser hybrid beamforming system where an access point (AP) communicates with multiple users simultaneously. The performance of the uplink multiuser hybrid beamforming system depends on the effective channel which is given by the product of the channel matrix and the analog beams. Therefore, to maximize the performance, we need to obtain the channel information and then select the analog beams appropriately by using the acquired channel information. In this paper, we propose the channel estimation method and low complexity analog beam selection algorithm for the uplink multiuser hybrid beamforming system. Additionally, our analysis shows that the proposed low complexity analog beam selection algorithm provides much less complexity than the optimum analog beam selection algorithm. From the numerical results, we confirm that the proposed low complexity analog beam selection algorithm has little performance degradation in spite of much less complexity than the optimum analog beam selection algorithm under the equal system configuration.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.259-262
• /
• 2004

본 논문은 열악한 채널 환경에서 ATSC 방식의 DTV 수신기의 성능 개선을 위해 빔 선택형 DTV 수신기 구조와 최적의 빔 선택을 위한 알고리즘을 제시하고자 한다. 빔 선택형 DTV 수신기의 채널 개선으로 인한 수신기의 성능 개선 효과와 이에 따른 최적 빔 선택을 위한 조건들을 살펴된다. 그리고 필드 테스트를 통해 측정된 ATSC DTV 수신 채널 모델링을 이용하여 등차기만을 사용하는 기존의 DTV수긴기와 빔 선택형 DTV수신기의 성능을 모의 실험을 통해 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.391-399
• /
• 2021

The conformal array sensor has different sub-array depending on different beam steering directions. According to the method to effective the sensor, the performance of the conformal array sensor can be different, where the sub-array selects an effective sensor. Also, due to the figure of the conformal array sensor, the figure of the sub-array can be different each other, which results in different performance on directivity index, beam width and etc. In this paper, two methods to select sub-array which is the criteria for each sensors position vector and directive vector were proposed. For two sub-array selection methods, the performance of the directivity index, horizontal and vertical beam width were compared with the average and variance. In addition, this comparison was conducted when the number of sensors was fixed. When the number of sensors was not fixed, the directional vector method mainly results in high performance, but the performance of vertical beam width was lower or equal. When the number of sensors was fixed, the performance of two methods is similar, but the performance of variance was deteriorated.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.72-73
• /
• 2000

단원자를 이용한 Cavity-QED 실험을 통해서 광자 수상태 및 sub-poissonian 광원 구현 및 비고 전적인 광 특성을 가지는 광원등을 구현 할 수 있다. 이를 위해서는 오랫동안 공진기 안에 포획하거나, 빔의 형태로 단원자들이 일정시간 동안 공진기를 지나게 해야 한다. 본 연구는 안정한 원자빔 속도제어 실험에 관한 것으로 자체 제작한 원자빔 오븐의 특성과 원자빔 속도 선택기의 제작, 속도 선택 결과에 대하여 논하고자 한다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.280-281
• /
• 2023

Wireless communication in marine environments requires a significant amount of power for long-range communication, resulting in high energy consumption. Moreover, the numerous constraints in marine environments make it difficult to apply existing wireless communication technologies, necessitating the development of new technologies to address these issues. This paper investigates beam selection technology for marine environments, which reduces overall power consumption and minimizes interference between signals by selecting and transmitting necessary beams for communication in a specific area, enabling better quality communication. We validate the energy efficiency of the beam selection technology through simulations and compare it with existing wireless communication technologies. The results show that beam selection technology consumes less power and provides better communication quality than existing wireless communication technologies. Therefore, beam selection technology plays a critical role in establishing efficient communication systems in marine environments, and its application can improve communication quality over a broader area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.68-76
• /
• 2015

This paper proposes the antenna selection scheme and power control algorithms of multiple nodes beamforming when the vehicles equipped with circular array antennas is moving and construct mobile mesh networks. The proposed antenna selection scheme chooses beamforming antenna elements considering antenna radiation gain and allows duplicated antenna selection for multiple adjacent nodes. The proposed power control algorithms maximize SIR for the duplicated antenna selection. The simulation demonstrates that the proposed antenna selection and power control achieve 2.5dB higher SIR gain than that of conventional methods when two nodes are apart from $15^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1469-1476
• /
• 2015

We propose a beam selection algorithm that improves inter sector SIR using a code-book of a circular array antenna in multi-sector wireless mesh network environments. The proposed method improves SIR using a combination of fed back code-book and guarantees QoS of all nodes. Computer simulation exhibits the proposed scheme demonstrates 4.42dB higher SIR than that of the conventional code-book method, QoS with proportional fair is improved by 1.70dB and fact that all nodes are satisfied Qos is also shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.130-138
• /
• 2008

In this paper, we propose a user selection method to maximize the sum-rate of downlink over opportunistic beamforming. The throughput of an opportunistic beamforming with non-uniformly distributed or a small number of users can decrease. In order to improve the throughput, we propose a scheduling method that does not use SINR or SNR but uses the effective channel gain of each user obtained from the SINR or SNR feedback. The proposed method makes it possible to select users flexibly according to the distribution of users. In numerical results, we show that the proposed methods improve the average sum-rate about 60% when users are distributed non uniformly.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.31-37
• /
• 2000

An angular selectivity through the focused readout beam is geometrically analyzed and experimental results are presented. Based on the analysis of geometrical results, we derive a new relation that the angular selectivity depends on incident conditions of the readout beam and independent on the writing conditions. In order to demonstrate our theory, we investigate angular selectivity as functions of following factors: writing beam incident angle, readout beam width and lens focal length. From the experimental results, it is shown that the angular selectivities are 2.632$^{\circ}$, 2.618$^{\circ}$, 2.604$^{\circ}$ when the external half-crossing angles of writing beam are 8$^{\circ}$, 10$^{\circ}$, 14$^{\circ}$, respectively. Applying the same incident angle of the recording beam, angular selectivity is changed by the control of readout beam width and then their properties are 2.632$^{\circ}$, 0.588$^{\circ}$. From these results, we have known that the angular selectivity is very critical to incident conditions of readout beam.