• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.23-28
• /
• 2008

Purpose: To develop the 2~8X zoom beam expander for the 1064 nm laser source. Methods: After developing the program by which the initial design values of 3-component zoom tracks can be quickly obtaind, we design and develop the zoom beam expander by applying this program and the commercial program of Sigma 2000. Results: In this study, we could develop the program by which the initial design values of zoom tracks can be quickly obtaind, and by applying this program and the commercial program of Sigma 2000 we could design and develop the zoom beam expander for 1064 nm which is able to zoom from 2${\times}$ to 8${\times}$. The developed zoom beam expander has an efficient diameter of the incidence side of 8 mm, an efficient diameter of the exit side of 32 mm, and a capacity with the finite ray aberration within 0.0001rad. Because the overall length (OAL) is restricted between 125 mm and 135 mm, the change of the whole barrel length which is caused by variations of the zoom driving becomes to be within 10 mm. Conclusions: we could develop the program by which the initial design values of zoom tracks can be quickly obtaind, and by applying this program we could design and develop the zoom beam expander for 1064 nm which is able to zoom from 2${\times}$ to 8${\times}$.

• The Optical Journal
• /
• s.110
• /
• pp.36-37
• /
• 2007

세계 반도체 레이저마킹기 시장의 50% 이상을 장악하고 있는 이오테크닉스(대표.성규동)가 이번에는 장비 한 대에서 최대 4개의 레이저 빔을 동시 분사할 수 있는 멀티빔 레이저 마킹기를 세계 최초로 개발하며 다시 한번 저력을 유감없이 발휘했다. 이 회사는 1년간의 연구개발 과정을 거쳐 탄생한 멀티빔 레이저마킹기를 통해 반도체 이외에 휴대전화 등 일반소비재로 확대 적용하는 등 기존 반도체 시장에 이어 범용 마킹 분야로 진출할 수 있는 발판으로 삼을 예정이다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.56-57
• /
• 2000

본 연구에서는 반도체 레이저로부터 조사되는 빔을 CRT 모니터의 shadow mask에 입사시켜 반사되는 빔을 렌즈를 통하여 센서로 사용한 위치검출소자(PSD)와 CCD에 확대 결상시켜 측정하였다. 센서로 사용한 PSD는 검출영역이 12mm, 위치분해능은 0.2um이며, 센서의 검출면상에서의 입사빔의 위치에 따라 매우 선형적인 특성을 가지며, 실시간적으로 처리할 수 있다는 장점을 갖고 있다. CCD는 1/3inch(512$\times$480pixels)를 사용하였다. (중략)

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2004

Read out signal and temperature distribution of magnetic amplifying magnetooptical disk were studied. Temperature distribution of recording layer and adjacent layers were calculated when the disk was at rest. Mark size, length and location were simulated from a chain of recording beam pulses. In addition, signal amplitude depending on the shape of the marks, readout signals from the recording layer and amplified marks of the readout layer, were simulated. Simplified thermal conduction model was used to calculate the temperature distribution of recording and adjacent layers as a function of time as well as to calculate the mark size, length and location. Readout signal was calculated by the convolution of the disk reflectivity and the Gaussian beam intensity. Readout signal from the mark in the readout layer amplified to the size of the laser beam fumed out to be twice as large as the signal from the crescent shaped mark in the recording layer.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.175-182
• /
• 2005

A laser beam expanding technique is employed to fabricate precise nano-patterns in a nano-replication printing (nRP) process. In the nRP process, some patterns can be fabricated in the range of several microns inside on a polymerizable resin by using a volume-pixel (voxel) matrix that is transformed from a two-tone bitmap figure file. The liquid monomers are polymerized by means of a two-photon-absorption (TPA) phenomenon that is induced by a femtosecond (fs)-pulse laser. The yokels are generated consecutively to merge into adjoining yokels in the process of fabricating a pattern. The resolution of a fabricated pattern can be obtained under the diffraction limit of a laser beam by the two-photon absorbed polymerization (TPP). In this work, a beam-expanding technique has been applied to enlarge a working area and to fabricate precise patterns. Through this work, a working area is expanded by the technique as much as 2.5 times compared with a case of without a beam expanding technique, and precision of outside patterns is improved.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.199-208
• /
• 2007

We have made an optical device to study the wave optics phenomena, such as image and diffraction pattern, constructive and destructive interference, by direct operation of laser beam and optical lenses. It consists of laser beam, goniometer, objective lens, intermediate lens, projection lens, CCD system, and computing system. As a result of the performance test, we were able to magnify samples up to 44 times with the resolution of about $5{\mu}m$. It is expected to help EM users understanding more easily principles of transmission electron microscopy (TEM).

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.60-65
• /
• 1997

This paper proposes a profilometry system for precise surface contouring of 3D objects using a direc- tionally magnified image of a laser light stripe. The resolution of this system can be improved several times comparad with that of conventional systems without loss of spatial resolution and depth of measurement. A pair of cylindrical lens(a convex lens and a concave lens) are used for a directionally magnified image of a laser light stripe maintaining the same focal plane. Also, image processing procedures for image reconstruc- tions are described.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.51-55
• /
• 2008

Purpose: To develop the program used in calculating and estimating anamorphic prisms used to construct an anamorphoser. Methods: If there is a program which can show the apex angle and the volume of prism which are decided by the refraction index of anamorphic prisms and the expanding ratio of incident beam, the production of anamorphic prisms can be done accurately. Moreover, it could become a convenient tool to the design and production of whole optical systems using anamorphic prisms. Developing this program, first, we had to induce formulas of prism that decide the apex angle and the arrangement angle of anamorphic prisms with the given refraction index of anamorphic prism and the given expanding ratio of incident beam. Then we programmed them by delphi 6.0 language so that they could be visualized on screen and easily confirmed. Results: We could develop the program used in calculating and estimating anamorphic prisms used to construct an anamorphoser. Conclusions: Judging from the results of applying this developed program to actual business, we could conclude that this program is useful in calculation and production of anamorphic prisms which are used as components of an anamorphoser because this program can offer a lot of accuracy and quickness to producers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

This paper presents a design method for optimizing the focused beam characteristics, which are mainly determined by the condenser lenses in a scanning electron microscopy (SEM) design. Sharply reducing the probe diameter of electron beams by focusing the condenser lens (i.e., the rate of condensation) is important because a small probe diameter results in high-performance demagnification. This study explored design parameters that contribute to increasing the SEM resolution efficiently using lens analysis and the ray tracing method. A sensitivity analysis was conducted based on those results to compare the effects of these parameters on beam focusing. The results of this analysis on the design parameters for the beam characteristics can be employed as basic key information for designing a column in SEM.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.4
• /
• pp.203-208
• /
• 2007

고출력 다이오드레이저(High Power Diode Laser, HPDL)는 독일을 중심으로 한 유럽내의 여러 국가에서 적용분야를 점차 높여가고 있으며, 금속소재에 있어서의 높은 흡수율 및 발진장치의 높은 에너지 변환효율이 중요한 요인이라고 할 수 있다. 레이저소스로부터 출력되는 사각형 또는 라인형의 레이저-빔은 다이오드레이저를 이용한 금속의 열처리분야에 매우 적합하며, 이미 Body-in-White 차체(Car Body) 양산라인의 브레이징 공정에는 수 년 전부터 실제 적용되어왔다. 또한, 다양한 빔 형상, 균일한 에너지 밀도, 낮은 운전비용, 간단한 유지보수, 좁은 설치공간, 손쉽게 이동이 가능한 구조, 광케이블을 이용한 레이저-빔의 전송 등 여러 장점으로 인하여 보다 유연하고 효과적인 생산환경을 구축할 수 있다는 것 또한 다이오드레이저의 응용분야를 확대하는 요인이 되었다.