• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.299-304
• /
• 2018

An improved genetic algorithm was proposed for pattern synthesis of an adaptive beam forming system using phased array antennas. The proposed genetic algorithm is an algorithm that adds acquired characteristics procedure to solve local optimization using the diversity. The performance of the proposed genetic algorithm is verified through the problem of finding a suitable chromosome for a picture composed of binary. And it is confirmed that it is suitable for the adaptive beam forming system based on the performance problem of combining main beam and two pattern nulls.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.383-391
• /
• 2014

In order to detect underwater acoustic signals, various SONAR array types have been developed, including towed line array SONAR system (TASS). However, the TASS suffers from performance degradation which is caused by aperture deformation during a turn, because the TASS have a long-aperture array. A parabolic array model for turning TASS have been developed to solve the degradation problem occurred during a turn. In this paper, adaptive beamforming system is developed using the parabolic TASS model to cancel interference signals. The developed beamforming system is based on generalized sidelobe canceller (GSC) structure and self-tuning adaptive algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.139-146
• /
• 2009

This paper presents an average internal loop-back antenna calibration method for array antenna in TDD(Time Division Duplex) systems. The proposed method calibrates the amplitude and the phase of RF systems using into mal coupler and switches without aids of external calibration systems. The average calibration scheme of the proposed method also increases reliability of calibration performance. Computer simulation demonstrates that the proposed method corrects beamforming angles of DOA estimation algorithm and BER performance in transmit power allocation scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.643-650
• /
• 2020

The phased array antenna has an advantage enabling rapid beam aim without the mechanical rotation of the antenna, because it arranges multiple elements in a linear or planer (grid or circular) and electronically controls the phase for each element. The planar array antenna is generally used a grid array and a circular array, and the circular form has the higher resolution comparing to the grid form due to the its structural characteristics. However, a concentric circular array (CCA) or a concentric ring array (CRA) with multiple circular arrays which each has different radius is used in the limited area, because the entire radius should be increased for the circular array with a number of elements. In this paper, we introduce the angle-of-arrival (AOA) estimator for an adaptive beamforming satellite system based on CRA and provide the simulation results for performance evaluation. In addition, simulation results are compared and analyzed to the case for the circular array antenna.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.519-522
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 탐지 성능에 큰 영향을 미치기 때문에 최적의 빔 설계는 오랫동안 많은 연구자들에 의해 연구되어 왔다. 실제로 최적의 빔 형성기를 구현할 때에는 각각의 센서에 대한 특성 고려와 파워를 효율적으로 전달하기 위한 정합회로의 설계가 필수적이다. 이전의 논문에서는 BeamCAD Tool을 이용한 최적 가중치의 계산, 센서 임피던스 측정 데이터와 Sensor Modeling Tool을 이용한 등가회로 모델링 그리고 Impedance Matching Tool을 이용한 정합회로 설계 기법에 대해서 소개하였다. 본 논문에서는 이러한 기법들과 함께 ABCD 전송 파라메터를 이용한 센서 가중치 보정 기법을 소개한다. 그리고 이러한 여러 기법들을 이용하여 최적빔 설계를 위한 가중회로를 구성하는 방법에 대해서 논의한다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.42-47
• /
• 1998

We have fabricated electron-optical lens for micro E-beam system that can overcome the limitation of current E-beam lithography. Our electron-optical lens consists of multiple silicon electrodes which were fabricated by micromachining technology and assembled by anodic bonding. The assembled system was installed in UHV chamber to observe the emission characteristics of focused electrons by the electro-optical lens. We used STM(Scanning Tunneling Microscope) tip for electron source. By performing lithography with the focused electrons with PMMA(poly-methylmethacrylate) as E-beam resist. We could draw 0.13${\mu}{\textrm}{m}$ nano-scale lines.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.42-49
• /
• 2008

This paper proposes a new beamforming algorithm to select beamforming gain or/and diversity gain in CDMA2000, W-CDMA, W-LAN channel according to signal environment on the multipath. In this paper, we present the criteria to obtain deversity gain at any point that based on quantized experimental value. Proposed method proposes represents a performance better than conventional algorithm adopting the largest two eigenvector when angle spread is exit. From the results of performance analysis through various simulation, it is confirmed that proposed method is far superior about $3{\sim}4$ times compare to conventional method in signal environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.72-80
• /
• 2003

This paper proposed the method of finding optimal weight vectors for enhancing the performance of an adaptive array antenna system by adopting a novel beam-forming algorithm in CDMA (code division multiple access) channel. This algorithm is a liberalized power method, based on power method, with the total computational load, O(4N). Where, N denotes the number of antenna elements. The performance of the proposed algorithm is shown in terms of SER (symbol error rates), allowable capacity, and the convergence characteristic in IS2000 1X CDMA channel. As a result of simulations, the adaptive way antenna system allows 6-10 times more users than the conventional one in a cell of a base station. Furthermore, the proposed algorithm shows superior performance to the conventional one regarding symbol error rates, converging characteristics, and computational load.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.145-148
• /
• 2004

수중음향 시스템에서는 빔형성(Beamforming) 기법을 이용하여 목표물로부터 신호를 수신하고 이에 대한 정보를 얻어낼 수 있는데, 이러한 빔형성에 있어서 주엽(Mainlobe)의 빔폭(Beamwidth)과 부엽(Sidelobe)의 크기(Level)를 설계자가 목표하는 값에 최적화 시킬 수 있는 방법을 찾는 것이 무엇보다도 중요하다 최근 연구된 빔형성 기법의 대표적인 결과 중 하나로는 Phi1ip의 Weighting Function Method를 들 수 있다. 이러한 Phi1ip의 방법은 목표 주엽폭과 부엽 준위를 정하고 이를 적응필터 설계방식과 유사하게 적응시켜 나가는 과정을 이용한다. 그러나 이 방법은 주엽폭과 부엽 준위간의 상관관계로 인해서 원하는 부엽준위에 다다르지 못하거나 결과값을 얻는데 상당한 시간이 소요되는 경우가 자주 발생하는데, 이러한 단점을 보완하기 위하여 본 논문에서는 부엽 준위에 미치지 못하는 일부에 대하여 부분 최적화를 시켜 비교적 쉽게 설계를 만족시키는 새로운 알고리듬을 제안하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.88-94
• /
• 2007

This paper deals with the performance analysis of 3-dimensional array antenna by DOA estimation and beamforming in GPS receiver for performance improvement by interference elimination. The array antenna in GPS receiver can improve the system performance by estimating DOA of arriving signal direction, making the main beam for desired direction and elimate the jammer signal by nulling while keeping the GPS signal direction by spatial filtering. In this paper, we propose five types of 3-dimensional array antenna and analyze the estimation error via MUSIC algorithm which is used for the estimation of DOA of arrived signal and beamforming performance. In analyzing DOA performance, we measure DOA estimation error, while in analyzing beamformig performance, we measure BER. In beamforming performance analyzing, we use various jammer power and the existence of GPS signal and angle spread. By performing through the computer simulation, Curved (B) 7-element antenna in proposed 3-dimensional array antenna exhibits the superior performance in the DOA estimation, estimation error, BER characteristic and angle spread compared to the rest four array antenna types.