• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.528-535
• /
• 2011

In this paper, a compact doppler sensor with oscillator type active antenna operating at 2.4GHz frequency band is proposed to measure the distance to a moving object. The oscillation frequency is shifted depending on approaching of the object, and a detection circuit discriminates the frequency deviation. The active antenna has been designed and simulated. The prototype fabricated has a small circular disk type of diameter 30mm and height 4.2mm. As for antenna performance, broadside radiation pattern with beamwidth of $120^{\circ}$ and oscillation frequency of 2.35GHz has been measured. Test results as a range sensor shows that signal voltage of about 240mV has been obtained for conducting plate moving 1 meter away from the sensor. And, signal voltage has been linearly increased to the ground from 5m height by free-falling the sensor.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.13-19
• /
• 1975

A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.69-75
• /
• 2012

In this paper, microstrip array antenna is proposed for the wireless communication of DSRC(dedicated short range communication) scheme at 5.8GHz, which works as a part of the Navigation terminal. The microstrip patches minimized from a rectangular microstrip antenna with a half wavelength are arrayed to be mounted on the narrow and long area in the top side of the navigation terminal. Besides, the array antenna can limit its own beamwidth to the driving lane and has better directivity. It is simulated to verify the validity of the proposed application. The prototype fabricated has a volume of $18{\times}40{\times}0.8mm^3$. From the measurement, it has circular polarization performance of 4dB axial ratio over 40MHz frequency band. In addition, antenna gain of 6.2dBi and 3dB beamwidth of $70^{\circ}$ at cross section of driving lane have been achieved.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2001

In order to detect the precise port/starboard direction of arrival of target signal in real noisy ocean environments, Inverse beamforming (IBF) algorithm is surveyed theoretically and the detection performances of IBF are analyzed with simulations. Cardioid Inverse beamforming algorithm was proposed for port/starboard discrimination and the performance was studied with simulations. It is shown that IBF has a 3dB array gain advantage over Conventional beamforming (CBF) under ideal conditions. This 3 dB advantage is proven theoretically and illustrated with simulations. The fact that the IBF beamwidth is narrower than the CBF beamwidth by a factor of 0.68 proves the performance of defection and spatial resolution improvement. Comparing the simulation results of Cardioid Inverse beamforming and Conventional Cardioid beamforming, it is shown that Cardioid Inverse beamformer has enhanced performance in minimum detection level, detection accuracy and resolution. Due to the results of moving target bearing detection test in endfire, it is shown that Cardioid Inverse beamformer has better performance, comparing the Conventional Cardioid beamformer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.414-424
• /
• 2003

In this paper, a multiple U-shaped slot antenna for 5.25㎓~5.35㎓ is designed, fabricated, and measured. The prototype consists of U-slot and two invert U-slot. To obtain enough bandwidth, the foam layer is inserted between ground plane and substrate. Important parameters in the design are U-slot length, width, position, airgap length, and feed point. From these parameters optimized, a multiple U-shaped slot antenna is fabricated and measured. The measured results of the antenna are compared with its simulated results. The resonant frequency of the fabricated multiple U-shaped slot antenna is 5.25㎓ the bandwidth for approximately 7.4%(VSWR<1.5) and the gain is 2.9~5.3dBi. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and I-Plane are 62$^{\circ}$ and 50$^{\circ}$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.34-40
• /
• 2009

In this paper, we derive the average received beampattern at each receive node which is randomly distributed within a disk when considering a collaborative beanforming between transmission nodes which are randomly distributed within another disk for ad hoc sensor network. Numerical results show that the radius of disk at the transmitter determines the beamwidth of mainbeam, and the sidebeam is affected by the number of transmitter nodes. We also consider K receive groups and divide the transmit sensor modes into K groups to support each receive group using beamforming, and derive the SINR at each receive node. Finally, we investigate the effects of beampattern and interference on total sum capacity among all receive node, and numerically determine the number of transmit nodes for each group which can achieve the maximal sum capacity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.40-46
• /
• 2002

In this paper we design and fabricate the Skeleton slot antenna which operates dually in GSM 900 and 1800 bands. Its simulation results are also compared with the measured ones. The original Skeleton slot antennas had the problems of unsatisfactory VSWR characteristics and considerably changing horizontal radiation patterns at high frequencies, but the proposed design improves these problems using multi-path feeding network and folding structure. The size of the radiator is 154 $\times$ 106(mm), and its height is 33(mm), and the reflector of 190$\times$190(mm) is used. The material of the radiator and reflector is 1mm-thick aluminum. Using NTC process reduces the mass production cost significantly. The measured return losses are 13.7 % at 900 MHz band and 16.4 % at 1800 MHz band, respectively. The horizontal radiation beam width is stable within $\pm$ 1$^{\circ}$ at both frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1455-1461
• /
• 2000

There are many researches to increase bandwidth of the microstrip patch antenna for wireless LAN. In spite of broad bandwidth, Bow-Tie antenna has disadvantages that are low gain and big size. In this paper, stacked Bow-Tie microstrip patch antenna for wireless LAN is designed in 5.725 ~5.825 GHz band. This antenna has characteristics that are broadband bandwidth, high gain and small size compared with microstrip patch antenna. In simulated results, the return loss is -34.2 dB at 5.78 GHz and bandwidth is 11.345% for VSWR 2:1 and 7.75%for VSWR 1.5:1. In measured results, the return loss is -38.45 dB at 5.78 GHz and bandwidth is 13% for VSWR 2:1 and 5.6% for VSWR 1.5:1. It has 73.16$^{\circ}$ -3dB beam width and 6.5dB gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.358-368
• /
• 2016

In this paper, for the mechanical beam steering of the Cassegrain antenna, the steering performances of the main reflector tilting method are characterized, and the Cassegrain antenna for the antenna rotating method is designed and its performances are measured. In the Cassegrain antenna operating at W-band, the changes of characteristics due to changes in the sizes of the main/sub-reflectors and other structural changes are analyzed to obtain the structural variables satisfying the performance goal. The manufactured antenna in W-band shows the measured gain of 42.08 dBi, 3 dB beamwidth of $1.32^{\circ}$, $1.14^{\circ}$ and the return loss($S_{11}$) of -23.58 dB at the center frequency of 94 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.465-470
• /
• 2007

This paper is designed and producted the microstrip patch antenna which used aperture coupled feed structure, and had a comparatively hish gain and headband characteristic with a PCS substitution repeater antenna. The proposed antenna transformed a coupled slot into a H-type in order to improve a characteristic of a general aperture coupled feed antenna. It is this H-type form slot reduces back lobe from the antenna backside at the same time that a coupling between a power feed and patches is iccreased, and to have maximized a gain of an antenna. As a result of having measured the antenna which the VSWR was 1.5 or below and tied up the gain than 7.5dBi in the $1750{\sim}1870$[MHz] that was a PCS substitution, and a beamwidth became in $80^{\circ}$ and radio waves shadow was local, but accomplishment did PCS mobile communication service in building me smoothly, but confirmed what practical use can become.