• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.471-474
• /
• 2004

본 논문에서는 유전자 알고리즘을 이용하여 소자간의 상호결합이 고려된 경우 빔 패턴 오차의 허용범위를 만족하는 개별소자의 허용오차를 분석하였다. 소나 배열을 통한 빔 패턴은 개별소자에 인가되는 가중치 뿐 아니라 소자간의 방사임피던스 즉 자기방사 임피던스와 음원 상호간의 음향적 간섭에 의한 상호방사 임피던스에 따라 달라진다. 본 논문에서는 유전자 알고리즘을 이용하여 상호결합이 있는 경우에 대해 1 차원과 2 차원 배열에서 주어진 빔 패턴 허용 범위를 만족하는 각 소자별 허용오차 분석하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.3-5
• /
• 2002

최근 기계적으로 빔을 움직일 수 있는 마이크로 스트립 패치 배열 안테나가 MEMS 기술을 이용해서 제작되고 시험되었다. 본 논문에서는, 제작된 안테나의 적용 예로써 위상변위기를 사용하지 않는 새로운 어레이 안테나의 방사패턴 합성방법을 제안하고, 제안된 방법을 원하는 빔 형상합성에 적용하였다. 방사패턴 형상의 최적화에는 Restricted Competition Selection(RCS)를 이용한 유전 알고리즘을 이용하였다. 또한 이러한 방식의 접근은 EMC 표준에 대처하기 위한 배열 안테나의 설계 시에도 적용이 가능하며, 제안된 방법을 이용하여 특정한 빔 형상들에 대한 합성이 가능하다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.19-23
• /
• 2003

헤드램프는 안개등, 후미등, 제동등, 방향지시등과 함께 자동차의 등화장치 중의 하나로써 특히 야간의 안전운행을 위해 필수적인 장치이다. 야간 운전시 차량의 운전자는 마주오는 차량의 헤드램프에 의한 눈부심으로 도로의 사정을 정확히 파악할 수 없는 일이 종종 발생하게 되는데 이것은 야간 사고의 큰 원인으로 지목된다. 그러므로 헤드램프의 빔패턴은 정확하고 sharp한 cut-off line을 가져야 한다. 본 논문에서는 미국식 빔패턴(SAE type)을 고려한 헤드램프용 반사갓 설계의 한가지 알고리즘을 제시한다.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.268-273
• /
• 2020

We analyze the characteristics of the coherent beam combination of lasers by monitoring the speckle pattern of the beam reflected from a scattering medium. Three collimated laser sources with high coherence are focused on a scattering target using a lens, and we then examine the speckle pattern of the returned beam in the Fourier domain. We observe that the size of the speckle pattern changes, depending on the focused-beam size or degree of spatial overlap of the three beams. Furthermore, through Fourier-domain analysis of the speckle pattern we obtain the monitoring variable to qualify the efficiency of the coherent beam combination.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.59-65
• /
• 2022

In this paper, a digital active phased array antenna is briefly introduced and beam forming method for a dual-channel side-lobe blanking applied to blank the side-lobe of the main beam is described. Next, the antenna performance was verified from results of design and antenna near-field measurement for the antenna main beam and side-lobe blanking beam. Then, a single-channel side-lobe blanking beam forming method was proposed to reduce the number of channels than the existing system operating dual-channel side-lobe blanking beam and weight distribution for each element of the side-lobe blanking antenna was designed with the proposed method. Finally, the designed single-channel side-lobe blanking beam pattern and blanking ability were verified and compared with the dual-channel side-lobe blanking beam. In addition, by comparing/verifying the conventional dual-channel and the proposed single-channel side-lobe blanking beam patterns measured through the receiving near-field test of the digital active phased array antenna and their ability to blank side-lobe of the main beam, validity of the proposed method for forming single-channel side-lobe blanking beam was confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.985-995
• /
• 2003

In this paper, a study on optimization of three dimensional multi-layered metallic disk array structure(MDAS) excited by circular waveguides was performed to shape efficient flat-topped element patterns(FTEP) of ${\pm}$20$^{\circ}$ beam width. Each radiating element of the MDAS is composed of input, transition and radiation circular waveguides and finite metal disks stacked on radiation circular waveguide. It has an array structure of a hexagonal lattice appropriate for the conical beam scanning. The analytic algorithm for the MDAS was proposed and the code was also programmed using it. Optimal design parameters of the MDAS were determined through the optimal simulation process to obtain ${\pm}$20$^{\circ}$ FTEP. Also, bandwidth characteristics for FTEP and reflection coefficients of the MDAS were investigated and, as the results, it was shown that the MDAS could shape good FTEPs of ${\pm}$20$^{\circ}$ beam width in main planes at least within a 5.6 % frequency band.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.121-124
• /
• 1999

본 논문에서는 선형배열을 이용하여 음향을 측정하기 위한 새로운 빔형성 알고리듬을 제안한다. 제안 알고리듬은, FIR필터 설계기법에 의해 가중상수 및 원하는 빔패턴을 설정하고 이를 초기치로 사용하여 원하는 빔패턴과의 오차가 최소가 되도록 가중상수를 최적화시킨다. 주파수영역의 지향지수 균일성 유지를 위해 옥타브대역을 부대역으로 세분하고 의사역행렬에 의해 전달행렬을 정방행렬화하여 부대역별로 최적화를 수행한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.363-644
• /
• 1997

This paper presents the design and fabrication of a shaped-beam array antenna which will be used for a PCS basestation using structure that is coupled to a microstrip line by an aperture on the interening ground plane. The shaped-beam pattern is obtained by an antenna synthesis method. An array antenna considering the mutual coupling between array elements patches) and a feeding network are designed by CAD tools. The feeding network is designed by using the Wilkinson power divider to obtain the optimized shaped-beam. The designed results are compared with the measured data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.803-805
• /
• 2015

MIMO receiver for multiplexing gain brings about antenna volume issue to which beam pattern switching scheme shall be one of the solutions. This scheme has been studied mainly in theory. This paper presents the test results and performance analysis of 2x2 MIMO receiver we implemented by using beam pattern switching.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.299-304
• /
• 2018

An improved genetic algorithm was proposed for pattern synthesis of an adaptive beam forming system using phased array antennas. The proposed genetic algorithm is an algorithm that adds acquired characteristics procedure to solve local optimization using the diversity. The performance of the proposed genetic algorithm is verified through the problem of finding a suitable chromosome for a picture composed of binary. And it is confirmed that it is suitable for the adaptive beam forming system based on the performance problem of combining main beam and two pattern nulls.