• 제목/요약/키워드: 빌라

검색결과 104건 처리시간 0.024초

리어가이더 형상변화에 따른 횡류홴 성능해석 (Analysis of Performance of Cross-Flow Fan with Various Rear Guiders)

  • 김동원;이준환;박성관;김윤제
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.2076-2082
    • /
    • 2003
  • A cross-flow fan is widely used on many industrial fields: mining industry, automobile and home appliances, etc. The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between 30% and 40% because of relative high impact loss. Recently, in the air-conditioning systems, the operating behaviors at the off-design points are highly regarded to broaden the application area for various air-cooling loads. Especially, at the lower flow rate, there exists a rapid pressure head reduction, a noise increase and an irregular flow field against a rearguider as a scroll of centrifugal fan. Numerical analyses are carried out for investigating the flow characteristics in a cross-flow fan including the impeller, the rearguider and the stabilizer. Especially, various types of rearguiders are estimated by numerical and experimental methods to insure the stable operation in the region of lower flow rate. Numerical domains are discretized by hexahedral cells. Three-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard ${\kappa}-{\varepsilon}$ turbulence model. ASHRAE standard fan tester is also used to estimate the performance of the modeled crossflow fan.

  • PDF

도무스 유형을 통한 근대 주거의 지속과 변화에 관한 연구 (A Study of Continuation and Change on the Modern Housing throughout the Domus Type)

  • 이진희
    • 한국주거학회논문집
    • /
    • 제24권1호
    • /
    • pp.79-87
    • /
    • 2013
  • The purpose of the study is to verify the effect of the Domus type on the modern housing-typology. This article specifies conceptual architectural typology through studying housing types and the changes by comparing experimental results over time since the ancient to the modern times. To successfully establish the purpose of this article, I cited Saussure's verbal methodology of system and representation along with Deleuze's philosophical cause of differentiation and repetition. Also adopting Aldo Rossi's architectural theory of typology, I established theory of housing continuation and alteration. I will compare and analyze particularly the Domus type, Adolf Loos's M$\ddot{u}$ller house, Luis Barragan's house, Le Corbusier's Villa Sovoye, and Mies van der Rohe's Three court house. And I research on the difference between architectural representation of hall and courtyard in modern housing. This research looks to emphasize historical comprehension and practical application of architectural history through housing studies.

에어컨용 직교류홴 시스템의 성능특성에 대한 기본적 설계변수의 영향에 관한 실험적 연구 (An Experimental Study on the Influences of Some Basic Design Parameters on the Performance Characteristics of the Cross-Flow Fan System in Air-Conditioner)

  • 구형모
    • 대한기계학회논문집B
    • /
    • 제23권6호
    • /
    • pp.695-702
    • /
    • 1999
  • A cross-flow fan which constitutes a fan-duct system with a stabilizer and a scroll-casing is widely used in many air-ventilating and air-conditioning devices. The cross-flow fan system has many design parameters which have crucial influence on the performance and the noise characteristics of the devices, which means many difficulties during the design stage of the devices and the general design guide has not sufficiently established yet. This study presents the experimental results of the parameter investigation of some chosen design parameter values, which are the shapes of the stabilizers, the profiles of the scroll casing part, and the diffusion angles of the flow exit. The results are expressed by the varying performance characteristics with the values of the parameters. They are found to have considerable effects on the system performance and should be considered with care in the design stage. Finally some helpful guides for the design and manufacturing of the cross-flow fan system are proposed.

콩고민주공화국 지질 및 광물자원 부존현황 (Geology and Mineral Resources of DR Congo)

  • 양석준;고상모;박성원;이길재
    • 한국광물학회지
    • /
    • 제25권3호
    • /
    • pp.175-184
    • /
    • 2012
  • 콩고민주공화국은 아프리카의 중앙에 위치하며, 기반암인 화강암계열의 암석들은 주로 북쪽과 북동쪽에 위치한다. 신원생대부터 중생대까지의 퇴적암들은 주로 콩고분지와 카루분지에 연관하여 발달하며, 중생대에서 현생시기까지의 퇴적암, 퇴적물들은 주로 콩고의 서부와 중앙부에 발달한다. 콩고민주공화국에 발달하는 대부분의 광상은 화강암계열의 관입암과 연관되어 나타나며, 키바라이드대, 루필리안호, 열곡대 등의 영향으로 주로 남쪽과 동쪽에 밀집된다. 남쪽과 동쪽을 포함하여 콩고민주공화국 내에는 다이아몬드, 금, 코발트, 구리, 아연 등 수많은 고부가가치 지하자원 및 카보너타이트와 연관된 희토류 광물들이 풍부하게 부존되어 있다. 콩고민주공화국의 자원개발은 대규모의 국영기업, 국영민간 합작기업, 민간기업, 소규모의 영세채광업자에 의해 이루어지고 있는데, 외국계 광업회사들은 대부분 국영기업들과 제휴 협정을 맺고 자원개발에 참여 중이며, 낙후된 광업 부문 발전 도모를 위해 카빌라 대통령은 관련 법령의 제정 및 개정, 정부간섭 최소화 등 투자촉진 정책을 시행하고 있어 향후 콩고의 광물생산이 크게 증가할 전망이다. 따라서 전략적으로 접근한다면 자원 확보가 유리한 지역으로 판단된다.

소방시설의 관리실태 조사 분석 (Survey Analysis of the Management of Fire Fighting Equipment)

  • 문석진;이동호
    • 한국화재소방학회논문지
    • /
    • 제25권6호
    • /
    • pp.98-103
    • /
    • 2011
  • 현재 국내 건축물은 일반주택, 빌라 등을 제외한 대부분 건물에 소방시설을 적용하고 있다. 그러나 소방시설의 활용은 이천물류창고 화재, 코리아 냉동 창고 화재, 대구지하철 참사와 최근 부산의 고층 오피스텔 화재 등에서 나타낸 문제점과 같이 제대로 작동하지 못함으로서 인명과 재산피해 등이 지속적으로 발생되고 있다. 본 연구에서는 소방시설 중 가장 널리 사용되고 초기 화재에 중요하게 사용되는 자동화재탐지설비, 비상경보설비, 피난설비, 옥내소화전의 관리 실태를 파악하고 이에 대한 문제점을 데이터화하여 실제 화재시 소방시설의 적극적인 활용을 위한 해결점을 찾고자 한다.

차량 롤 각 추정 알고리즘 및 롤 저감력 분배 제어 전략 (Estimation Algorithm of Vehicle Roll Angle and Control Strategy of Roll Mitigation Force Distribution)

  • 정승환;이형철
    • 한국자동차공학회논문집
    • /
    • 제23권6호
    • /
    • pp.633-641
    • /
    • 2015
  • The ROM (roll over mitigation) system is a next-generation suspension system that can improve vehicle-driving stability and ride comfort. Currently, mass-produced safety systems, such as ESC (electronic stability control) and ECS (electronic control suspension), enable measurements of longitudinal and lateral acceleration as well as yaw rate through inertial sensor clusters, but they lack direct measurements of the roll angle. Therefore, in this paper, a roll angle estimation algorithm from ESC system sensors and tire normal force has been proposed. Furthermore, this study presents a method for roll over mitigation force distribution between the front and rear of a ROM system. Performance and reliability of the roll angle estimation and roll over mitigation force distribution were investigated through simulations. The simulation results showed that the proposed control algorithm and strategy are reliable during vehicle rollovers.

룸에어콘 실내기의 설계인자 변화에 따른 관류홴의 공력성능 연구 (Study on the Aerodynamic Performance of a Cross-Flow Fan for the Various Design Factors of an Indoor Room Air-Conditioner)

  • 김장권;정규조
    • 동력기계공학회지
    • /
    • 제9권3호
    • /
    • pp.33-38
    • /
    • 2005
  • The aerodynamic performance of a cross-flow fan is strongly influenced by the various design factors of a rear-guider and a stabilizer. The purpose of this paper is to investigate the effects of a rear-guider and a stabilizer on the aerodynamic performance of a cross-flow fan. The design factors considered in this paper are a rear-guider clearance, a stabilizer clearance, and a stabilizer setup angle, respectively. This experiment was carried out with a constant revolution number of 700 rpm in a cross-flow fan installed in the fan tester. The static pressure, flowrate, torque, and revolution number were measured in this paper. Also, the pressure coefficient and the efficiency were analysed according to the various assembly conditions using a stabilizer setup angle, a stabilizer clearance, and a rear-guider clearance in the indoor room air-conditioner.

  • PDF

관류홴의 설계인자 변화에 따른 리어가이더의 표면압력 특성에 관한 실험적 연구 (Experimental Study on the Surface Pressure Characteristics of a Rear-Guider for the Various Design Factors of a Cross-Flow Fan)

  • 김장권
    • 동력기계공학회지
    • /
    • 제9권3호
    • /
    • pp.50-57
    • /
    • 2005
  • A cross-flow fan is strongly influenced by the various design factors of a rear-guider and a stabilizer. The purpose of this paper is to investigate the effects of a rear-guider and a stabilizer on the surface pressure of a rear-guider in an indoor room air-conditioner using a cross-flow fan. The design factors considered in this paper are a rear-guider clearance, a stabilizer clearance, and a stabilizer setup angle, respectively. The operating condition of a cross-flow fan was controlled by changing the static pressure and flowrate using a fan tester. All surface pressures of a rear-guider are differently distributed according to the stabilizer setup angle, and show a zero value in the flow coefficient, ${\Phi}{\fallingdotseq}0.5$ only of a stabilizer setup angle, $45^{\circ}$. Especially, they show a big negative value in the expansion angle larger than $34^{\circ}$ regardless of a rear-guider clearance, a stabilizer clearance, and a stabilizer setup angle. On the other hand, surface pressures for various stabilizer cutoff clearances are better than those for various rear-guider clearances.

  • PDF

EU의 사료첨가용 항생제 사용금지에 관한 규정 소개

  • 박종명
    • 대한수의사회지
    • /
    • 제35권3호
    • /
    • pp.198-205
    • /
    • 1999
  • 유럽연합의회는 1998년 12월 17일 사료첨가물에 관한 유럽의회규정(Council Directive 70/524/EEC, `70. 11. 23)을 개정(Council Regulation EC 2821/98)하여 그동안 사료첨가용으로 사용을 허용하였던 항생물질 중 아연바시트라신, 스피라마이신, 인산타일로신 및 버지니아마이신 등 4종의 사용을 금지하였다. 그러나 풀라보포스포리폴(풀라보마이신), 모넨신소디움, 살리노마이신소디움, 아빌라마이신 등 4종의 사료첨가용 항생물질은 계속 사용이 허용된다. 축산식품의 안전성이 강조되고 있는 가운데 유럽연합의 이러한 조치는 축산분야에 종사하는 사람들에게 커다란 관심을 갖게 하고있다. 이 글은 유럽연합이 4종의 항생물질을 사료첨가용으로 사용을 금지하게된 배경을 살펴봄으로서 유럽연합의 사료첨가용 항생제 사용금지에 관한 정확한 내용을 파악하는데 도움을 드리기 위하여 작성되었다. 유럽연합의 아연바시트라신, 스피라마이신, 인산타일로신 및 버지니아마이신 등 4종의 항생제에 대한 이러한 사용금지 조치는 가축의 성장촉진용으로 사용되는 이러한 항생물질에 내성을 획득한 가축의 세균이 인체에 기생하는 세균에게 그 내성을 전달하여 인체용으로 사용되는 관련 약품들에 대하여 내성을 일으켜 사람에서의 질병 치료를 어렵게 함으로서 인체의 건강을 해할 우려가 있다는 전제하에서 실시되었다. 이러한 조치는 현재까지 확실한 증거가 나타나지는 않았으나, 그 위험을 배제할 수 없으므로 이러한 위험을 예방하는 차원에서 이루어지는 예방적 조치이며, 따라서 금번의 사용금지 조치는 유럽연합 집행위원회에서 2000년 12월 31일 이전까지 이러한 항생제의 내성 유발에 관한 여러 가지 연구와 항생제 투여동물에서의 미생물 내성 감시 프로그램의 결과에 따라 재검토될 것을 규정하고 있다. 금번 사용금지 조치된 4종의 항생제는 그 동안 우리나라에서도 그 유효성과 안전성이 인정되어 축산 현장에서 사용되어온 물질들이다. 금번 유럽연합의 조치는 우리나라에서도 이러한 항생제들에 대한 재평가의 필요성을 제기하는 것으로서 이 분야에 종사하는 산업계, 학계, 연구계가 모두 힘을 모아 조속한 기간 내에 그 안전성을 재평가하여 축산식품에서의 안전성을 확보하도록 노력하여야할 것이다.

  • PDF

고급연립주택의 평면구성 특성에 관한 연구 (A Study on the Characteristics of the Floor Plan in Luxurious Row-Houses)

  • 라윤주;오혜경
    • 디자인학연구
    • /
    • 제14권4호
    • /
    • pp.209-216
    • /
    • 2001
  • 본 연구는 우리나라에서 '빌라'로 통칭되는 고급연립주택의 사례조사를 통해 그 평면의 특성을 파악해 보는 것이 목적으로 1980년에서 2001년까지 서울과 분당지역에 건설된 지상 4층 이하, 연면적 660$m^2$ 이사인 연립주택 중 전용면적 50평 이상의 고급연립주택을 대상으로 하여 분양자료와 건축, 주택, 인테리어 관련잡지, 인터넷에서 평면 135개를 수집하여 분석하였으며 그 결과는 다음과 같다. 첫째, 고급연립주택의 평면 특성은 평형이 대형화 될수록 개 실의 수가 증가하기 보다는 새로운 기능의 공간이 거주자의 개성에 맞게 구성되며, 복층형 구조의 평면유형이 시대에 따라 다양하게 변화, 시도되고 있다는 것이다. 둘째, 고급연립주택의 공동공간의 특성은 구성방식에 있어 거실분리형(L-DK)이 가장 일반적인 형태로 나타났다. 평형이 커질수록 개방형은 거의 보이지 않고 거실분리형, 부엌분리형의 순으로 공간을 분리하여 사용하는 경향이 나타났다. 셋째, 고급연립주택의 부부전용공간의 특성은 안방의 기능 분화가 시작된 80년대부터 현재까지 안방-드레스룸-욕실-부부침실의 공간구성이 일반화되었다는 것이다. 넷째, 고급연립주택의 가사작업공간의 특성은 주부의 작업효율을 높이고 수납공간의 확보를 위해 다용도실의 가사실을 하나의 개실로 구성하여 부엌과 인접하여 배치한다는 것이다. 다섯째, 고급연립주택의 출입공간의 특성은 현관진입형, 마당진입형, 부출입구진입형으로 나타났으며 이중 현관진입 형에서 현관문에 중문이 이중으로 있는 경우가 가장 많았다.

  • PDF