• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.537-540
• /
• 1987

항공기가 평형상태로 비행하는 도중 돌풍과 같은 외부교란을 만난 교란상태운동은 선형화된 미분방정식으로 표현되며 비교적 짧은 비행시간동안의 비행은 선형시 불변계가 된다. 돌풍은 Gauss-Markov확률과정으로 모델링 되며, 항공기가 돌풍을 만난 교란상태운동은 시스템론적으로 보면 백색잡음이 성형필터를 거쳐 계에 입력되는 것과 같다. 초기의 설계방법은 고전적인 주파수영역에서의 해석방법을 사용하였으나 1960년대에 최적제어이론이 도입되면서 평가함수를 사용하여 원하는 비행특성을 얻는 방법을 사용하게 되었다. 그 후 계에 입력되는 외란과 측정시의 잡음으로 인한 불확실한 측정량으로부터 최적상태변수의 추정을 위해 필터링이론을 도입한 확률제어이론을 적용하여 자동조종장치를 설계하게 되었다. 이때까지는 연속제어계로 설계되었으며 그 후 측정신호를 샘플링하여 연속제어계와 등가의 이산제어계를 사용한 자동조종장치가 등장하였으며 이 경우 설계기법으로는 연속제어계를 사용하고 실현시킬 때는 디지털컴퓨터를 사용하였다. 이는 제어하는 동안 계의 계수와 제어법칙을 바꾸어 줄 수 있는 이산제어계의 장점을 이용하지 못하므로 처음부터 계를 등가의 이산계로 보고 제어계를 설계하는 방법이 도입되었다. 이 때 샘플링간격의 결정과 Quantization 영향이 설계시 고려되어야 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1217-1224
• /
• 2009

A simple and effective guidance and control scheme that enables autonomous three-dimensional path-following for a fixed wing aircraft is presented. The method utilizes the nonlinear path-following guidance law for the outer loop that creates steering acceleration command based on the desired flight path and the current position and velocity of the vehicle. The scheme considers the gravity in the guidance level, where it is subtracted from the acceleration command to form the specific force acceleration command which the aircraft is better suited to follow than the total acceleration command in the inner-loop. A roll attitude control scheme is also presented that enables inverted flight or sideslip maneuvers such as slow roll and knife-edge. A series of aerobatic maneuvers are demonstrated through simulations to show the potential of the proposed scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.35-44
• /
• 2006

When control surface failure occurs, it is conventional to correct a current control or to transform to other control. In this paper, instead of adopting a conventional way, a reconfiguration method which compensate the failure with alternative control surface deflection, depending on the level of failure, by using neural network and PCH(Pseudo-Control Hedging). The Conroller is designed of inner-loop(SCAS : Stability Command Augmentation System) with DMI(Dynamic Model Inversion) and outer-loop with Y axis acceleration feedback for a coordinate turn. Additionally, double PCH method was adopted to prevent actuator saturation and input command was generated to compensate for failure. At the end, The feasibility of the method is validated with randomly selected failure scenarios.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.536-541
• /
• 2015

In this paper, we propose a the image-based automatic flight control system for the mini drone. Automatic flight system with a camera on the ceiling and markers on the floor and landing position is designed in an indoor environment. Images from the ceiling camera is used not only to recognize the makers and landing position but also to track the drone motion. PC sever identifies the location of the drone and sends control commands to the mini drone. Flight controller of the mini drone is designed using state-machine algorithm, PID control and way-point position control method. From the, The proposed automatic flight control system is verified through the experiments of the mini drone. We see that known makers in environment are recognized and the drone can follows the trajectories with the specific ㄱ, ㄷ and ㅁ shapes. Also, experimental results show that the drone can approach and correctly land on the target positions which are set at different height.

• 전기의세계
• /
• v.50 no.12
• /
• pp.20-24
• /
• 2001

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.488-494
• /
• 2013

The control law design and analysis environment of the FBW helicopter system have been developed using model base design method. The model based design is generally used in a aircraft, unmanned aerial system and automobile as well as rotorcraft development. The model based design provides many advantages such as development risk and schedule reduction using simulation and autocode generation. This paper describes a development of process for verification and validation of auto generated code for FBW helicopter flight control law. And this process is applied for Fly-By-Wire Helicopter Development Project. The results of functional test for auto generated code meet several specific requirements.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.19-25
• /
• 2001

In this study an analysis on flight characteristics and flight control methods for a wing in ground effect vehicle is made. In order to closely view its nonlinearity a few limit cycles are examined and related to the characteristics of the linearized systems. Several flight control methods are compared for the cruise mode with initial height error and command tracking mode of ascending, cruise, and descending. In comparison performance and the implementation aspects are examined. For the possible control inputs, combinations of elevator, thrust, and flap are considered and LQR-based output command tracking scheme is applied in the control system design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.22-30
• /
• 2008

This paper deals with the nonlinear optimal control approach to helicopter maneuver problems using the indirect method. We apply a penalty function to the deviation from a prescribed trajectory to convert the system optimality to an unconstrained optimal control problem. The resultant two-point boundary value problem has been solved by using the multiple-shooting method. This paper focuses on the effect of the number of shooting nodes and initialization methods on the numerical solution in order to define the minimum number of shooting nodes required for numerical convergence and to provide a method increasing convergence radius of the indirect method. The results of this study can provide an approach to improve numerical stability and convergence of the indirect method when we solve the optimal control problems of an inherently unstable helicopter system.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.874-881
• /
• 2010

A automatic flight control system(AFCS) of UAS needs to control its flight path along target path exactly as adjusts flight coefficient itself depending on static or dynamic changes of airplane's features such as type, size or weight. In this paper, we propose system which tunes control gain autonomously depending on change of airplane's feature in flight as adding MLM(Machine Learning Module) on AFCS. MLM is designed with Linear Regression algorithm and Reinforcement Learning and it includes EvM(Evaluation Module) which evaluates learned control gain from MLM and verified system. This system is tested on beaver FDC simulator and we present its analysed result.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.79-82
• /
• 2011

무인기용 비행제어 소프트웨어는 인터럽트 핸들러에서 비결정적인 수행결과를 조래하는 경합이 발생될 수 있다. 이러한 유형의 경합을 탐지하기 위한 기존 방법은 원시 프로그램의 인터럽트 핸들러를 스레드로 변환하여 정적 경합탐지 도구를 사용하므로 프로그램 수행 시 실제 발생하지 않는 부정확한 경합(false positives)를 보고한다. 본 연구는 부정확한 경합 보고를 줄이기 위해서 원시 프로그램을 POSIX 실시간 스레브 프로그램으로 변환하고 Lockset기반 탐지기법 의해서 탐지된 공유변수를 대상으로 Happens-before 관계 분석기법을 이용하여 경합을 탐지하는 동적 경합탐지 도구를 사용한다. 제시된 방법의 실험을 위해서 Knob Assembly에 탑재되는 비행제어 소프트웨어를 대상으로 정적 경합탐지 도구와 동적 경합탐지 도구의 경합탐지 결과를 비교 분석한다.