• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.7-19
• /
• 2003

The airspace has to be designed considering the flight safety and economic efficiency of aircraft operators. The International Civil Aviation Organization(ICAO) published standards and recommended practices for safe design of the airspace. Each contracting country must follow the ICAO standards in designing the airspace for the utilization of civil aviation. Normally each member establishes its own standards and national aviation law for the safe and efficient design of the airspace, regarding the ICAO standards. However, our government has not developed yet clear and detailed standards and regulation system for airspace design. This might lead to aviation accidents and disputes between operators of aviation system This study is to review the characteristics of ICAO standards and a legal problem related to application of international standards for airspace design. Specifically this research analyzed the case of airspace design and operation of a domestic airport. The results of analysis are as follow: (1) per the safety of civil aviation, it is very required to establish national regulation system to follow ICAO standards in designing airspace, (2) It is also necessary to establish separate procedure for civil aircraft in military air base, when the aerodrome is co-used by military and civil aircraft. If the same procedure for military aircraft is applied to civil aircraft, it is necessary to make clear what the design concept is, (3) and the differences from ICAO standards have to be publicly known.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.125-157
• /
• 2019

Technological advancement and demand of sUAS (small Unmanned Aircraft System)are rapidly growing, which makes the current legal system unable to follow. Currently, Aviation Security Act and its subordinate law exclude the registration and certification for non-commercial purpose sUAS weighing less than 12kg. Despite this sUAS being the most popular model for consumer, there is no way to regulate them legally. When there is sUAS crash accident, the operator legally responsible for the occurrence damage cannot be identified. It has been an issue for a long time with the concrete classification and registration of sUAS, but it has not been introduced yet. It is obvious that damages caused by sUAS will be transferred not only to operators but also to third parties. Discussions on liability insurance for these sUAS are actively being held. But first, it is necessary to identify who will be responsible for the damage caused by the sUAS. In other words, even with the liability system established, without clarified operator the damage occurred cannot determine who is responsible. According to the cases of America and Germany, they have enforced the law of registration and identification obligated to 200g or 250g sUAS. Therefore, it is necessary to prepare regulations on concrete classification and registrations to identify for noncommercial purpose sUAS as soon as possible in Korea.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.84-88
• /
• 2016

정부에서 제시하고 있는 항공레저산업의 활성화를 위해서는 전국에 경비행장을 많이 건설하여 운영할 수 있는 인프라를 제공해야 하지만, 현실적으로 개발이 된 곳은 많지 않다. 그래서 경항공기, 경량항공기 및 초경량비행장치 관련 지속적인 수요 증가에 대비하고, 경항공기, 경량항공기 및 초경량비행장치 산업 활성화를 위한 "경(소형)비행장 개발의 표준화"를 통한 개발 방안에 대하여 생각해보고, 그 사례로 경남 사천 지역의 사천 송포 미래창조 첨단산업단지 조성 사업을 하면서 경비행장을 건설을 계획하고 있어 "경비행장 개발의 표준화"에 객관적인 연구에 의거 그 입지선정 타당성을 검토해보고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.827-838
• /
• 1994

Numerous pavement response models rely on constitutive relationships to describe the response of granular materials. In this study, a nonlinear elastic constitutive model which is a function of bulk stress and octahedral shear stress is proposed to describe the resilient behavior of thick granular base courses under flexible airfield pavements. Special features of this model are its accuracy to predict the nonlinear resilient behavior, its simplicity to determine the material constants and its ability to model the secondary effect of decreasing the resilient modulus due to shear effects. In laboratory tests, the nonlinear resilient behavior of granular materials is investigated and values of resilient moduli are determined to provide data for verifying the proposed model. It is found that the resilient modulus is much more dependent on the states of stresses in terms of bulk stress and deviator stress than any other factors. Result of comparison shows that predicted values of resilient moduli are in good agreement with the measured values indicating that the proposed model is suitable to describe the nonlinear resilient behavior of the granular material with wide range of stress states which meet in airfield pavements.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.325-331
• /
• 2017

As a GPS stability problem arises, MLAT system is spotlighted as an alternative technology of ADS-B. MLAT system has a high position accuracy as much as ADS-B. Also, MLAT receives the mode A,C,S, and 1090ES(ADS-B) signals from the mounted aircraft transponder. MLAT receives signals from several receiver units and calculates aircraft positions. MLAT has ADS-B level positioning accurarcy using GPS and can calculate the position information with objects independently. According to global environment changes, Local area multiltilateration(LAM) surveillance system is under development for moving vehicles and aircraft detection in airport. These are still under testing in Tae-an Airfield. In the paper, we analyzed the performance by comparing the calculated position data from MLAT to RTK. In order to confirm the position accuracy of MLAT and the deviation of position data between fixed target and moving target on the ground during the field test in Tae-an Airfield.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.192-198
• /
• 2015

Since instrument landing system currently operating in most airports is operating in single-pass, it is not possible to accommodate a large number of aircraft. A satellite navigation system GBAS using a GNSS has been developed to solve these limitation when air traffic increases. GBAS is better than the ILS in position accuracy and capable of landing through multiple paths rather than a single path, the aircraft can perform varied landing procedures. In this paper, after we established a virtual ILS procedures at Taean Airfield in which ILS installation is impossible due to environmental requirements and airspace restrictions, flight test was performed by Cessna Skyhawk 172 to compare the virtual ILS procedures and curved approach procedure and the advantage of curved approach was confirmed.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.288-295
• /
• 2014

Current ILS is difficult for the many aircraft to access to the system at the same time because of it's system. And the equipments should be installed at the direction of every runway. Also, There is limitation that landing procedures must be have of only ILS single course when the aircraft land on the ground. hereupon, The more air traffic exist, the longer delay time of flight be. GBAS using the GNSS has been developed to overcome those limitations. Before flight test in Teean airport, this paper compares the taean approach procedure and curved approach procedure by using the simulator. Comparison study shows that curved approach procedure takes less flight time, low fuel consumpsion and make it possible to avoid noise airspace more than original procedure.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.47-54
• /
• 2020

North Korea has recently developed and deployed missiles with various ranges as asymmetrical forces. Among them, short-range ballistic missiles with improved accuracy are expected to aim at achieving tactical goals by hitting important military facilities in Korea with a small number of missiles. Damage to the air force airfields, one of North Korea's main targets of missiles attack, could limit the operation of air force fighters essential to gaining air superiority. Based on the attack by the short range ballistic missiles, the damage probability of military airfields was simulated. And as the one of the concepts of passive defense, the way to reduce the loss of combat power was studied through the changes of the air force squadrons deployment. As a result, the effective deployment plan could be obtained to reduce the amount of power loss compared to the current deployment.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.479-484
• /
• 2020

Foreign object debris (FOD) is a generic term for all substances that may pose a threat to aircraft operations on a runway. In the past, FOD detection and collection methods using human resources were very inefficient in terms of efficiency and economics, so it is essential to develop an unmanned FOD detection system suitable for domestic use. In this paper, the fixed FOD automatic detection system and mobile FOD automatic detection system using EO camera and radar were studied and developed at the Taean airfield of Hanseo University, and fixed and mobile method were operated to confirm that automatic FOD detection in the runway of the airfield is possible regardless of illumination and weather conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.549-557
• /
• 2022

Due to harsh conditions of construction site, understanding of current feature of terrain and other infrastructures is critical issue for site managers. However, because of difficulties in acquiring the geographical information of the construction sites such as large sites and limited capability of construction workers, comprehensive site investigation of current feature of construction site is not an easy task for construction managers. To address these circumstances of construction sites, this study deduce difficulties and applicabilities of unmanned aerial vehicle in the area of construction site management. To confirm applicability of UAV in civil construction project, case study have been conducted on the road construction project. The result of case study proved that the developed system is one of promising technologies that has been studied in construction site management. To improve applicability of UAV for construction and process management information, law and technical issues will be an important area of future study.