• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.221-230
• /
• 2000

The usefulness and limitations of the impact-resonance method, which is a nondestructive evaluation (NDE) method for concrete, are studied by both experimental and theoretical methods. For the experimental study, several concrete slab specimens with various inclusions embedded were fabricated, and tested by the impact-resonance method. Some of the inclusions have been detected and accurately located, but some have not. The reasons for the failure in the latter cases have been investigated theoretically by using finite element analyses, from which the primary factors determining the success of the method have also been identified. This study will serve to enhance the understanding of the underlying physics and to improve the usefulness of the impact-resonance method as applied to concrete NDE.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.455-464
• /
• 1992

Using FT-IR, we determined the depth of silylated layers produced from various gas-phase-silylation conditions was proposed by using Fourier Transform Infrared (FT-IR) spectroscopic analysis. The depth of silylated layer was determined from absorbance measurments of the significant peaks (Si-O-ph, Si-C, Si-H) of FT-IR spectra with background spectrum subtraction method. And the results were compared with thickness measurments of SEM. The results were well agree with SEM. It found to be well suited for determining silylation process window.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.572-579
• /
• 2003

By comparing the measured optical reflection spectra with calculated one by the transfer-matrix method (TMM) in epitaxial wafers for vertical-cavity surface-emitting lasers (VCSELs), we have estimated the systematic thickness errors in a simple and nondestructive way. The experimentally confirmed technique is based on the finding that the shape of the reflection spectra depends mainly on a newly defined single parameter, the effective error in the n-mirror layers, and the thickness error in the active cavity simply shifts the Fabry-Perot resonance wavelength. Also shown is that the proposed method is reliable when the relative standard deviation of the random thickness errors is less than 0.005. Because reflection spectra are routinely measured, we can easily estimate the thickness errors nondestructively with high spatial resolution.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.141-147
• /
• 2014

A nondestructive ultrasonic technique was applied to evaluate the thermal characteristics and degradation of synthetic polymer resin (plastics) with better cost-effectiveness and functionality than glass and metal. Thermoplastic and transparent acrylic resin (PMMA) specimens were annealed at below the glass transition temperature ($T_g$), and the propagation characteristics (attenuation and velocity) were measured. The attenuation increased and the velocity decreased with thermal degradation. The results showed that the thermal aging of the specimens could be evaluated quantitatively and that the Tg could be evaluated qualitatively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.54-59
• /
• 1998

원자로 압력용기 용접열영향부의 세부영역별 열 cycle 재현(simulation) 시험편을 제작하여 기계적 특성시험, 미세조직시험 및 magnetic Barkhausen noise (BN) 측정을 수행하였다. 각 영역에서 보자력(coercivity)은 크게 변하지 않았으나, Barkhausen noise (BN) 는 현격한 차이를 볼 수 있었다. 용접열영향부 각 위치에 대한 BN 는 미세조직과 기계적특성의 변화와 어느정도 특징적 변화를 보였으나, 미세조직 인자별로 정량적인 관계를 찾기 위하여는 더욱 더 많은 연구가 필요한 것으로 보였다. 이는 BN 의 변화에 미치는 영향인자가 미세조직적으로 매우 복잡한 관계를 갖기 때문으로 생각되었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.72-72
• /
• 2004

대부분의 금속 재료는 제조 공정 중에 인장, 압축, 압연, 압출, 인발 등 소성 변형을 수반하는 가공의 단계를 거치게 된다. 가공 단계에서 가해준 변형률 및 이에 따라 형성된 전위구조 등은 생산재의 기계적 성질에 많은 영향을 미친다. 그리고 소성 변형이 수반되는 또 하나의 과정은 피로, 크리프 손상 등의 소성 변형을 수반하게 되는 기계적 손상이다 이러한 기계적 손상에 의해서도 전위가 도입되며, 전위의 집적부위에서 균열이 생성되기도 한다. 따라서 기계적 손상을 비파괴적으로 평가하는데 있어서도 소성 변형의 영향을 파악하는 것이 하나의 중요한 문제가 된다.(중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.146-146
• /
• 2017

현대의 스마트폰 및 태블릿pc등을 가능하게 만든 집적 기술 중의 하나는 3차원 집적 회로(3D-IC)와 같은 패키징 기술이다. 이러한 첨단 3차원 집적 기술은 메모리집적을 통한 대용량 메모리 모듈 개발뿐만 아니라, 메모리와 프로세서의 집적, high-end FPGA, Back side imaging (BSI) 센서 모듈, MEMS 센서와 ASIC 집적, High Bright (HB) LED 모듈 등에 적용되고 있다. 3D-IC의 3차원 모듈 제작 시에는 기존에 발생하지 않았던 여러 가지 파괴 모드들이 발생하고 있는데 Thermal/Photonic Emission 장비 등 기존의 2차원 결함분리 (Fault Isolation) 기술로는 첨단의 3차원 적층 제품들에서 발생하는 불량을 비파괴적으로 혹은 3차원적으로 분리하는 것이 불가능하므로, 비파괴 3차원 결함 분리 기술은 향후 선행 제품 적기 개발에 매우 필수적인 기술이다. 본 연구는 3D-IC 반도체의 비파괴적 내부결함 검사를 위하여 가시광선-근적외선 대역(351nm~1770nm)의 InGaAs (Indium Galium Arsenide) 계열 영상검출기 (imaging detector)를 사용하여 분광 시스템 광학 설계를 통한 초분광 영상 기반 검출 모듈을 제작하였다. 제작된 초분광 영상 기반 검출 모듈을 이용하여 구리 회로 위에 실리콘 웨이퍼가 3단 적층 된 반도체 더미 샘플의 초분광 영상을 촬영하였으며, 촬영된 초분광 영상에 대하여 Chemometrics model 기반의 분석기술을 적용하여 실리콘 웨이퍼 내부의 집적 구조에 대한 검사가 가능함을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.112-121
• /
• 1994

This paper discusses the feasibility of ultrasonic C-scan technique for nondestructive evaluation of spot weld quality. Ultrasonic evaluation for spot weld quality was performed by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of the corona bond from nugget, preliminary infinitesimal gap experiment by newton ring is tried in order to set up the optimum ultrasonic test condition. Ultrasonic image data obtained were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be measured with the accuracy of 1.0mm, and voids included in nugget can be detected to $10{\mu}m$ extent with simplicity and accuracy. Finally, it was found that it is necessary to make a profound study of definite discrimination of corona bond from nugget and the approach of quantitative evaluation of nugget diameter by utilizing the various image processing techniques.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.113-118
• /
• 2012

Cultural heritages emit volatile organic compounds(VOCs) during degradation as chemical, biological factors. These VOCs in the atmosphere are degradation factors for another materials. But non-destructive organic analysis methods are uncommon, and have difficulties for field application. In this study, solid phase micro-extraction(SPME) and gas chromatography( GC) are carried out for analysis of VOCs which are emitted from leather, and prove SPME field holder's efficiency. I analize leather archival objects at The National Archives of Korea by cross-checking GC and SPME methods. It could be confirmed that the compounds are (E)-2-nonenal, butyl hydroxy toluene emitted itself from leather.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.130-137
• /
• 2000

Ultrasonic technique which is one of the most common and reliable nondestructive evaluation techniques has been applied to evaluate the integrity of structures by analyzing the characteristics of signal scattered from internal defects. Therefore, the numerical analysis of the ultrasonic scattered field is absolutely necessary for the accurate and quantitative estimation of internal defects. Various modeling techniques now play an important role in nondestructive evaluation and have been employed to solve elastic wave scattering problems. Because the elastodynamic boundary element method is useful to analyze the scattered field in infinite media. it has been used to calculate the ultrasonic wavefields scattered from internal defects. In this study, a review of the boundary element method used for elastic wave scattering problems is presented and, as examples of the boundary element method, the scattered fields due to a circular cavity subjected to incident SH-wave and due to a surface-breaking crack subjected to incident Rayleigh wave are illustrated.