• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.376-377
• /
• 2003

대기환경에 대한 정보의 파악은 환경연구의 기본이 된다. 유해원소 및 미량원소에 의한 환경오염과 그로 인한 인체건강에 대한 영향은 인간생활에 심각한 문제가 되므로 대기, 수질, 토양등의 환경시료 중의 농도를 정확히 측정하는 것은 매우 중요한 일이다. 중성자 방사화분석법은 핵반응을 통해 생성시킨 방사성동위원소로부터 방출되는 방사선을 검색하여 절대적으로 성분원소를 정량하는 핵분석기술(Nuclear Analytical Techniques)중의 하나로서 소량의 시료로부터 미소량원소의 비파괴, 동시다원소분석이 가능하고 분석감도($10^{-3}$ - $10^{-7}$$\mu\textrm{g}$)가 탁월한 분석기술이다. (중략)

• Nuclear Engineering and Technology
• /
• v.8 no.1
• /
• pp.41-47
• /
• 1976

A nondestructive, instrumental neutron activation analysis using a Ge(Li) detector is applied to investigate the present levels of mercury and other trace elements in some fresh-water fish. The results show large variations of mercury content which are indicative of important local sources and indicate the inter-dependence relations between two of some trace elements. Analytical results for mercury in antracites are also given with the concern for their combustion as one of major causes of the mercury pollution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1A
• /
• pp.53-59
• /
• 2010

Recently, NDTs (Non-Destructive Techniques) using infrared camera are widely studied for detection of damage and void in RC (reinforced concrete) structures and they are also considered as an effective techniques for maintenance of infrastructures. The temperature on concrete surface depends on material and thermal properties such as specific heat, thermal conductivity, and thermal diffusion coefficient. Different porosity on cement mortar due to different mixture proportions can show different heat behavior in cooling stage. The porosity can affect physical and durability properties like strength and chloride diffusion coefficient as well. In this paper, active thermography which uses flash for heat induction is utilized and thermal characteristics on surface are evaluated. Samples of cement mortar with W/C (water to cement ratio) of 0.55 and 0.65 are prepared and physical properties like porosity, compressive strength, and chloride diffusion coefficient are evaluated. Then infrared thermography technique is carried out in a constant room condition (temperature $20{\sim}22^{\circ}C$ and relative humidity 55-60%). The mortar samples with higher porosity shows higher residual temperature at the cooling stage and also shows reduced critical time which shows constant temperature due to back wall effect. Furthermore, simple equation for critical time of back wall effect is suggested with porosity and experimental constants. These characteristics indicate the applicability of infrared thermography as an NDT for quality assessment of cement based composite like concrete. Physical properties and thermal behavior in cement mortar with different porosity are analyzed in discussed in this paper.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.484-491
• /
• 1997

본 연구에서는 비파괴적 분석 기법인 각분해 X-선 광전자 분광기(Angle-Resolved X-ray Photoelectron Spectros-copy)를 이용하여 GaAs 표면 자연 산화막의 깊이에 따른 화학적 결합 상태 및 조성 분석을 수행하였다. GaAs의 벽개면 및 Ar이온으로 식각된 면을 기준시료로 하여 각 원자의 광전자 강도(intensity)를 보정해주는 인자인 ASF(atomic sensitivity factor)의 최적값을 구하였다. 이륙각에 따라 발생되어지는 각 원소의 피이크 분해와 정확한 ASF의 보정을 통한 각 원소의 실험적인 결과를 이용하여 깊이 방향으로의 조성 분포 모델을 세웠으며, 이론적인 강도와의 상호비교로부터 표면 오염층의 구조는 표면으로부터 탄소층, Ga-oxide와 As-oxide로 이루어진 oxides층, As-As결합의 elemental As층 및 GaAs기판의 순으로 존재함을 알 수 있었다. 또한 GaAs 표면에 존재하는 오염층은 35.8$\pm$3.3 $\AA$이었다. 또한 위 결과로부터 분석깊이 영역에서 원자수의 비로써 정의되는 의미로서의 실질조성을 구하였는데 단지 특정 이륙각에 따라 일반적인 ASF로 보정된 표면조성 결과는 표면 상태를 명확히 표현해주지 못함을 확인할 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.171-175
• /
• 2017

In the non-destructive inspection field, we invest a lot of time and resources in developing the radiation source system to ensure the safety of the workers. However, the probability of accidents is still high. In order to prevent potential radiation accidents in advance, it is necessary to directly verify the position of the radiation source, but the research is still insufficient. In this study, we developed a monitoring system that can detect the position of the radiation source in the source guide tube in the gamma-ray irradiator. The characteristics of the radiation detector are estimated by monte carlo simulation. As a result, the radiation detector for Ir-192 gamma-ray energy was analyzed to have secondary electron equilibrium at $150{\mu}m$ regardless of the semiconductor material. Also, it is expected that the gamma ray response characteristic is the best in $HgI_2$. These results are expected to be used as a basis for determining the optimal thickness of the radiation detector located in the detection part of the future monitoring system. In addition, when developing a monitoring system based on this, radiation workers can easily recognize the danger and secure safety, as well as prevent and preemptively respond to potential radiation accidents.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.307-314
• /
• 1997

Inductively coupled plasma atomic emission spectrometry(ICP/AES) was used for the determination of uranium and thorium in geological materials. Samples were predecomposed by mixed acid digestion technique. The separation of the uranium and thorium was achieved by systematic solvent extraction with TTA(thenoyltrifluoroacetone) and TOA (tri-n-octylamine) and back extraction into HCl. The results for standard rock sample, NIST SRM 278, showed a good agreement with those certified from NIST as well as found values by other non-destructive techniques. Additional purification for extracted portions was carried out by anion exchange chromatography for measurement of several natural radioisotopes of uranium and thorium by alpha spectrometry.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2009

After several PWSCCs were found in Bugey(France), Ringhals(Sweden), Tihange(Belgium), Oconee, Arkansas, Crystal Fever, Davis-Basse, VC Summer(U.S.A.), Thuruga(Japan), USNRC and PNNL started the research on PWSCC, that is, PINC project. The aim of this project is to fabricate and obtain representative NDE mock-ups with flaws to simulate tight PWSCC cracks, to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing tight cracks such as PWSCC, to document the range of locations and crack morphologies associated with PWSCC and observed responses and to incorporate findings from other ongoing PWSCC research programs, as appropriate. By participating in PINC project, Korean morphology technique about PWSCC and NDE technique have improved and become similar lever with other advanced country. Therefore, the evaluation technique of integrity for nickel alloy component has been improved by cooperation with university, research institute and industries.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.3-10
• /
• 2022

In this study, damage resulting from internal flaws was investigated by finite element analysis for the safety evaluation of a non-destructive testing platform for hydrogen pressure vessels. A specimen was modeled and calculated using finite element analysis to determine material properties in accordance with the parameters of the composite material in order to assess the safety of the Type 4 hydrogen pressure vessel. Through this, flaws in the hydrogen pressure vessel were modeled, and test conditions were provided in accordance with rules to look into whether there was safety. Delamination, foreign object, and vertical cracks were modeled for internal flaws, and damage was examined in accordance with failure criteria. As the delamination defect approached the interior of the hydrogen pressure tank, it became more likely to cause damage. Additionally, as the crack depth grew in the case of vertical cracks, the likelihood of crack propagation rose. On the other hand, it was anticipated that the foreign item defect would suffer more damage from the outside in. A non-destructive testing platform will be used to assess the safety of fuel cell vehicles that are already in operation in future research.

• Tunnel and Underground Space
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2009

For the purpose of determining the thickness of concrete lining and detect of the cavity where may be located behind tunnel lining, IE (Impact-Echo) method it effectively useful in the tunnel safety diagnosis and the quality control during the construction. As a part of case study, we applied IE method to various tunnel structure types such as road tunnel and subway tunnel constructed by NATM (New Austrian Tunnelling Method) and ASSM (American Steel Support Method). As tunnel specifications estimated from this method were compared with coring data, design drawing and other survey results, it was very good agreement with each other. In conclusion, we verified that IE method shows an accurate and reliable result. The conventional interpretation of IE method in frequency domain gives only vertical information at a certain point. However, the interpretation using time-frequency analysis and depth section imaging technique from two dimensional profiling surveys can show more reliable information about structure inside.