• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.420-425
• /
• 1999

Time of flight diffraction(TOFD) method is used in nondestructive tests of piping and pressure vessels because of its advantages over a pulse echo technique: its speed, objectivity, repeatability and its insensitivity to specimen surface conditions and discontinuity orientation. But it is the one of weak points in TOFD method that it has the dead zone in sub-surface resolution induced by lateral waves. We solved the dead-zone problem near the sub-surface by using the deconvolution method and the developed ultrasonic testing system showed high performance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.155-161
• /
• 2010

Recently, the electromagnetic techniques of the eddy current testing(ECT), alternating current field testing, magnetic flux leakage testing and remote field testing have been used as a nondestructive evaluation method based on the electromagnetic induction. The eddy current testing is now widely accepted as a NDE method for the heat exchanger tube in the electric power industry, chemical, shipbuilding, and military. The ECT system mainly consists of the synthesizer module, analog module, analog-to-digital converter, power supplier, and data acquisition and analysis program. In this study, the synthesizer module and the analog module which are essential to the ECT system were primarily developed. The developed ECT system is basically a multifrequency type which is able to inject the maximum four frequencies based on the frequency and time domain multiplexing method. Conclusively, we confirmed that the EC signal was processed appropriately in each circuit modules, and the Lissajous EC signal was displayed in the impedance plane.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.630-633
• /
• 2001

This paper propose electronic speckle pattern interferometry(ESPI) for reliability evaluation of electronic device. Especially, vibration problem in a fan of air conditioner, motor of washing machine and etc. is important factor to design the devices. But, it is difficult to apply previous method, accelerometer to the devices with complex geometry. ESPI, non-contact measurement technique applies a commercial fan of air conditioner to vibration analysis. Vibration mode shapes, natural frequency and the range of the frequency are decided and compared with that of FEM analysis. In mechanical deign of new product, ESPI adds weak point of previous method to supply effective design information.

• Composites Research
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

A new non-destructive evaluation method using tapping sound is proposed. This method, named Tapping Sound Analysis, is using the difference between tapping sound data of healthy structure and defective structure as the criteria of determination of internal defect of composite structure. For the characterization of tapping sound, a feature extraction method based on wavelet packet transform is proposed. And a feature index is defined for the decision of existence of internal defects. To prove the possibility of proposed method as a non-destructive evaluation method, experimental study is performed. The tapping sound data of healthy structure and defective structure are measured and compared based on the proposed decision method. The experimental results showed that the feature index is a good indicator for the determination of internal defects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.305-313
• /
• 2000

To determine detection capabilities of locating steel bars and delamination inside concrete, commercially available nondestructive testing (NDT) equipments have been tested. The equipments include two radar systems and two electromagnetic method systems. The inclusions are a 19 mm diameter steel bar and 50 mm thick delamination embedded at different cover depths from the surface of concrete specimens. For the steel bar, attempts were made to determine the size of the bars by changing the diameter of the bars. A sample result of measuring horizontal spacing between doubly reinforced bars is presented in this paper. Experimental results on various measurement cases are discussed. Application of numerical modeling technique for the simulation of radar measurements and improved output display of radar measurements are also presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.290-295
• /
• 2000

The joint treatment of concrete is one of the technical problems in top down construction method. Joints created with the top down construction result in serious weakness from the aspects of both structural and water-barrier function. Ultrasonic method was used for the inspection of top down construction joints of a various column in SRC structure in this study. The advantages and limitations of this method for non-destructive inspection in top down construction joints are investigated. As a result, it has been verified that the semi-direct measurement method is more effective than the other methods for detecting the voids of construction joints using ultrasonic method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.296-304
• /
• 2000

Radar is becoming a popular tool for condition assessment of concrete structures. The advancement of radar method to concrete structures requires a systematic approach, which incorporates the fundamentals of radar theory and the characteristics of concrete as a material with electromagnetic properties. The research work presented in this paper deals with the establishment of effective measurement area for radar measurements, the determination of concrete thickness using radar, and the calculation of the dielectric constant of concrete from radar measurements. As results, formulas have been suggested to determine optimum measurement area for concrete, using radar and concrete thickness has been successfully identified for specimens used in this work. In the experiments, five concrete specimens which have the dimensions of 900mm (length) $\times$ 600mm (width) with thickness variation from 50mm to 250mm are used.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.391-397
• /
• 2011

Conventional film radiographic test has been generally and widely used in the inspection on the weldment for quality assurance. On the other hand, since the analog RT is well known for typical time and cost consuming method with complex process of inspection, the industry has researched various ways how to improve radiographic test technology. In this study, we verified the fact that digital RT provides a lot more benefit in effectively detecting defects, ever film details, through digital processing of image enhancement, compared to film RT. As a result, we reached conclusion that digital RT is positively able to replace the film RT in industry in part or in whole.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.254-260
• /
• 2002

In this study, two types of mobile robotic systems using NDT (Non-destructive testing) method are developed for automatic diagnosis of the boiler tubes and large size pipelines. The developed mobile robots crawl the outer surface of the tubes or pipelines and detect in-pipe defects such as pinholes, cracks and thickness reduction by corrosion and/or erosion using EMAT (Electro-magnetic Acoustic Transducer). Automation of fault detection by means of mobile robotic systems for these large-scale structures helps to prevent significant troubles without danger of human beings under harmful environment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.10-14
• /
• 2009

Heat generation mechanism of ultrasound infrared thermography is still not well understood, yet and there are two reliable assumptions of heat generation, friction and thermo-mechanical effect. This paper investigates the principal cause of heat generation at fatigue crack with experimental and numerical approach. Our results show most of heat generation is contributed by friction between crack interface and thermo-mechanical effect is a negligible quantity.