• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1985

A three dimensional vision is obtained by stereoscopic view using a modified commercial TV set and matching color filter glasses. Two video signals from two CCTV cameras are connected to the RGB (red, green, blue) inputs of picture tube selecting two different colors for two video signals. A synchronizing signal drives a CCTV camera and the color TV set. On the other hand, a delayed synchronizing signal drives the other CCTV camera shifting its image on display. This shift is used in correcting image distortion.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.24-33
• /
• 1985

A study has been made on the correlation between ultrasonic attenuation and mechanical properties with different prior austenite grain size. It was found that ultrasonic attenuation is increased with increasing grain size, decreasing yield strength and increasing charpy impact energy value for ALSI 4140 steel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.2 no.1
• /
• pp.5-9
• /
• 1982

Experiments were performed according to ultrasonic attenuation measurement and comparison method of DAC curve to analyze the difference between PSI and 2nd ISI ultrasonic testing results. Smaller error was found by comparison method of DAC curve, and that method was more useful practically.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.44-49
• /
• 2017

본고에서는 열유도 적외선 열화상 기법의 원리와 응용에 있어 기초적인 개념, 특정 상태량 및 실험적 기법에 대하여 소개하도록 한다. 유도 열화상 기법에 적용되는 유도 주파수의 범위는 1500 Hz ~ 52 MHz이며 강자성 강재 단조 부품의 표면결함 검출에 사용되어진다. 균열 검출 감도는 자분탐상기법과 유사하나 필요한 경우 유도 주파수를 낮춤으로서 강재에 숨겨진 결함을 검출할 수 있다. 탄소섬유강화폴리머(CFRP)에서는 섬유 결함을 검출하며, 실리콘 태양 전지에서는 양호한 열적 콘트라스트와 함께 균열을 검출한다. 유도 열화상 기법의 향 후 대표적인 활용분야로는 레일 및 휠과 같은 철도 구성요소에서의 결함 탐상이 있다[1].

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.65-72
• /
• 1990

Comparison of acoustic emission, ultrasonic testing and crack gauge in 3-point bending testing have been studied. As the results, COD is indirectly assumed by strain gauge rate and grid pitch width when crack gauge grid is out. Acoustic emission is qualitatively able to measure crack growth by total count but ultrasonic testing has a difficulty in measuring it because of echo height fluctuation according to the change and pressure of UT. probe.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.18-23
• /
• 1990

In materials with the large grain size, ultrasonic waves are highly attenuated by the grain boundary acting as scattering centers due to discontinuity of elastic constant. In this study, the improved probes were developed so that they minimized the effect of grain scattering in order to detect deep flaws in coarse grained materials. As the result, the developed ultrasonic transducers showed the better sensitivity and signal to noise ratio when compared with the commercial probes in testing the interior of coarse grained material.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.29-37
• /
• 1990

In this study the disbonding tests of adhesively bonded Al/Al honeycomb structures were performed by ultrasonic methods. Ultrasonic C-scan squiter method and ultrasonic surface wave attenuation measuring method were applied for the detection of skin/core disbonding. The bonding quality of Al/Al honeycomb structures could be well evaluated by properly controlled ultrasonic parameters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1990

It is difficult to detect such flaws as stress - corrosion cracking or corrosion wastage(loss of bolt diameter) in the threads. In many cases the critical size of a flaw is very small(1-2 mm order). This paper describes how it is possible to discriminate small flaw indications in threads using the time difference or thread signals(TDTS) by a signal-conditioning technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.91-95
• /
• 1990

Welding residual stress was measured by Barkhausen noise method. The calibration experiment was done for the quantitative analysis. The specimen for the calibration experiment must has the same thermo-mechanical history as the actual material to be tested. The Barkhausen noise were analysed by the pulse-height distribution. The results show that the distribution and magnitude of welding residual stress from Barkhausen noise method are in good agreement with those from blind hole method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.1
• /
• pp.23-29
• /
• 1984

This paper describes the evolution of quality assurance in Korea from it's total reliance on foreign contractors to the present status of conducting all QA functions independently. A brief status of the Republic of Korea Regulatory Bodies, licensing precess, codes and standards, and the quality organization of the Korea Electric Power Corporation are also included.