• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.120-127
• /
• 2015

본 논문에서는 기존의 비파괴 초음파검사 시 사용되는 단일소자 탐촉자와 부채꼴 위상배열 탐촉자의 단점을 보완할 수 있는 선형배열 탐촉자를 설계 및 제작하였다. 선형배열 탐촉자는 KLM 해석 기반의 PiezoCAD 프로그램과 FEM 해석 기반의 PZFlex 프로그램을 사용하여 설계되었으며 고해상도를 위한 광대역 특성을 갖도록 압전소자 설계 시 2-2 복합체 구조를 도입하였다. 설계된 적층 구조를 바탕으로 128개 소자를 갖는 선형배열 탐촉자를 제작하고 시뮬레이션 결과와 성능 비교를 수행하였다. 제작된 선형배열 탐촉자는 5.5 MHz의 중심주파수를 가지며 -6 dB 에서 70%의 주파수 대역폭을 나타내어 초음파검사 시 검사체 내부의 효과적인 영상을 제공할 수 있을 것으로 기대한다.

• 비파괴검사학회지
• /
• 제5권2호
• /
• pp.42-48
• /
• 1986

Electromagnetic - Acoustic Transducers for the inspection of tubes were developed using permanent magnets and induction coils. The propagation velocity of ultrasonic waves in a tude wall was measured by the transducers. The position of a flaw in a tube and the relative size of flaws with different size were measured.

• 비파괴검사학회지
• /
• 제5권2호
• /
• pp.34-41
• /
• 1986

The ultrasonical characteristics of inclined planar reflectors is investigated by the maximum amplitude method. The reflected ultrasound is varied by the reflector size, shape, inclination and using transducers. It was found that the detecting ability for planar reflectors was decreased with increasing transducer size and misorientation angle and increased with decreasing ultrasonic frequency, also the misorientation angle of planar reflectors affected significantly for the measurement of refklector size.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.98-105
• /
• 1989

Detection of creep damages in centrifugally cast HK-40 reformer furnace catalyst tube is a common problem for the safety and scheduled operation of chemical plants. This study was focused on the development of an automatic ultrasonic scanning device with which the creep damage of welded zone of HK-40 reformer tubes is detected and evaluated.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.56-68
• /
• 1989

Recently, there are many fields have been required for the precision measurements, as an advanced example of which, a precise change of inner structure during the hydration process of mortar was observed by ultrasonic and dielectric measurements. The results show that it is possible to determine the safety of mortar and mixing ratio, and strength growth and shrinkage rate by heat evolution.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.69-76
• /
• 1989

Piezoelectric elements, backing and shoe material are the important components of the ultrasonic transducer. In this study, characteristic constants in the domestic and the foreign PZT ceramic elements are investigated, The acoustic properties of the domestic and the foreign backing and shoes are characterized. The effects of components characteristics, the kinds of the piezoelectric elements and the thickness of the wear plates are investigated for the manufactured normal beam ultrasonic transducers.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.39-47
• /
• 1989

As the necessity of the safety diagnosis of the concrete structure, more reliable ultrasonic technique to qualify the concrete is required. In this study, the artificial surface crack depth is measured using several types of the ultrasonic probes. As results, the horizontal shear wave probe is most useful to determine the crack depth compared to the other probes. For the surface wave probe, the ultrasonic wave path is changed with the surface crack depth.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.525-533
• /
• 2009

Emphasis in the paper is placed on describing guided wave successes and challenges for applications in aircraft and composite materials inspection. Guided wave imaging methods discussed includes line of sight, tomography, guided wave C-scan, phased array, and ultrasonic vibration methods. Applications outlined encircles lap splice, bonded repair patch, fuselage corrosion, water loaded structures, delamination, and ice detection and de-icing of various structures.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.519-524
• /
• 2009

This work presents a simple technique to determine the Poisson's ratio of homogeneous solid material using a pair of low cost PVDF ultrasonic transducers. It is based on transducer's property of generating longitudinal and transversal waves depending on the excitation frequency. Mechanical tests were conducted to validate the proposed method, resulting in a good agreement between ultrasonic and mechanical techniques.

• 비파괴검사학회지
• /
• 제23권4호
• /
• pp.372-379
• /
• 2003

The problems encountered by ultrasonic testing of austenitic stainless steel weld joints are discussed in the paper. Due to low thermal conductivity and the occurrence of single phase between the melting point and the room temperature, coarse and oriented grains are formed in such weld metals more in thick sections. This leads to higher scattering at the grain boundaries and low signal to noise ratio, and extensive beam skewing. Experimental results to understand these problem are explained.