• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.57-66
• /
• 2012

This study intended to evaluate the operational performance change from the introduction of the bus signal priority system using the field data. To complete the objective, travel time and volume data were collected from the before and after study, then the distribution of individual vehicle's travel time and the difference of travel time and traffic volume were compared respectively. Analysis results showed that no significant volume change was observed from both passenger vehicle and bus for the major and cross streets. It was identified that the quality of travel time distributions of passenger vehicle and bus was improved after introducing the bus signal priority system. In terms of average speed, passenger car in a major direction increased by 6.5% and bus increased by 10.5% in general. Statistical tests showed that those speed differences were statistically significant at the 95% of confidence level. The results of this paper will be a good source for further research in the area of bus signal priority control.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.833-839
• /
• 2019

Bus Information System (BIS) collects information related to the operation of buses and provides information to users through predictive algorithms. Method of predicting through recent information in same section reflects the traffic situation of the section, but cannot reflect the characteristics of the target line. The method of predicting the historical data at the same time zone is limited in forecasting peak time with high volatility of traffic flow. Therefore, we developed a pattern recognition bus arrival time prediction algorithm which could be overcome previous limitation. This method recognize the traffic pattern of target flow and select the most similar past traffic pattern. The results of this study were compared with the BIS arrival forecast information history of Seoul. RMSE of travel time between estimated and observed was approximately 35 seconds (40 seconds in BIS) at the off-peak time and 40 seconds (60 seconds in BIS) at the peak time. This means that there is data that can represent the current traffic situation in other time zones except for the same past time zone.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.33-43
• /
• 2002

Travel choice behavior is affected by real-time traffic information. Recently, in urban area, real-time traffic information is provided by several instruments such as transportation broadcasting, internet PC network and variable message sign, etc. Furthermore, it has been increasing for urban travelers to use real-time traffic information provided by several instruments. The purpose of this study is to analyze the effects of advanced traveler information on urban worker's travel choice behavior. Among several Advanced Traveler Information System(ATIS) employed in urban area. This study focuses on examining the effects of transportation broadcasting on urban worker's travel choice behavior. This study attempts to examine traveler's mode change behavior in the pre-trip stage and traveler's route change behavior in the on-route stage. For this study, the survey data collected from Daegu City in 2000 is used. For empirical analysis, several nested logit models are estimated, and among them, the best models are reported in this paper. Furthermore, based on the empirical models estimated for this research, important findings and their policy implications are discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.53-66
• /
• 2005

Microscopic simulation models, which focus on individual vehicles, are used extensively in the transportation operations in order to capture vehicle to vehicle and vehicle to traffic controls. There are many important factors involved when a micro simulation model is applied as an evaluation tool for the traffic system. They typically include test bed, software, simulation time period, measure of effectiveness, parameter for a software, OD matrix, and random seed number. To evaluate the effects of those factors, sensitivity analysis was performed to identify the effects of those factors based on CORSIM and TRANSIMS results. Three freeway corridors, two in Houston (I-10 and US 290) and one in Sin Antonio (I-37), were chosen as test beds. Three time periods (AM, PM, off-peak) and three OD matrix estimates were used for the analysis. It was found that the micro-simulation results were highly sensitive to the model Parameter sets and the OD information. The degree of sensitivity was a function of the test bed and time period.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.31-44
• /
• 2004

The study of Estimation model for the short-term travel time prediction. There is a different solution which has predicted the link travel time to solve this problem. By using this solution, the link travel time is predicted based on link conditions from time to time. The predicated link travel time is used to search the shortest path. Before providing a dynamic shortest path finding, the prediction model should be verified. To verify the prediction model, three models such as Kalman filtering, Stochastic Process, ARIMA. The ARIMA model should adjust optimal parameters according to the traffic conditions. It requires a frequent adjustment process of finding optimal parameters. As a result of these characteristics, It is difficult to use the ARIMA model as a prediction. Kalman Filtering model has a distinguished prediction capability. It is due to the modification of travel time predictive errors in the gaining matrix. As a result of these characteristics, the Kalman Filtering model is likely to have a non-accumulative errors in prediction. Stochastic Process model uses the historical patterns of travel time conditions on links. It if favorably comparable with the other models in the sense of the recurrent travel time condition prediction. As a result, for the travel time estimation, Kalman filtering model is the better estimation model for the short-term estimation, stochastic process is the better for the long-term estimation.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.65-75
• /
• 2014

Bus headway plays an important role not only in determining the passenger waiting time and bus service quality, but also in influencing the bus operation cost and passenger demand. Previous research on headway control has considered only an hourly difference in the distribution of ridership between peak and non-peak hours. However, this approach is too simple to help manage ridership demand fluctuations in a short time scale; thus passengers' waiting cost will be generated when ridership demand exceeds the supply of bus services. Moreover, bus ridership demand varies by station location and traffic situation. To address this concern, we propose a headway control algorithm for minimizing the waiting time cost by using Smart Card data. We also provide proof of the convergence of the algorithm to the desired headway allocation using a set of preconditions of political waiting time guarantees and available fleet constraints. For model verification, the data from the No. 143 bus line in Seoul were used. The results show that the total savings in cost totaled approximately 600,000 won per day when we apply the time-value cost of waiting time. Thus, we can expect that cost savings will be more pronounced when the algorithm is applied to larger systems.

• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.33-43
• /
• 1990

우리나라에서는 70년대 이후 컨테이너 수송체계가 도입되어 운영되어 왔으나 차량의 급격한 증가와 더불어 컨테이너 수송체계는 도시교통에 있어서 많은 문제를 야기시키는 것으로 논란이 되고 있다. 특히, 부산항은 우리나라 최대의 국제 무역항으로써 전 컨테이너 수송화물의 90%이상을 처리하고 있고, 또한 수출입항으로서 제 역할을 다하고 있으나 낮은 도로율(12.45%)과 산재해 있는 30여개의 Off-Dock CY로 인해서 도심을 통과하는 컨테이너 수송차량은 많은 교통문제를 유발시키고 있다. 본 연구는 1) 부산시에 산재해 있는 30여개의 Off-Dock CY에 이르는 주요 도로상에서 컨테이너 수송량의 신간별 분포에 따라 컨테이너의 운행시간대를 첨두 시간대, 비첨두 시간대 및 심야 시간대로 분류하여 각 시간대별 평균 수송 시간 및 교통 체증으로 인한 수송 지체수준을 확인하였고, 2) 컨테이너 전용부두로 부터 Off-Dock CY에 이르는 도시 고속도로 및 주요간선도로상에서의 수송시간 및 수송 지체수준을 비교 분석하였으며, 3) 마지막으로, 효율적인 컨테이너 수송체계를 위한 최적 수송시간대 및 도로체계를 제시할 수 있었다. 특히, 컨테이너 수송시간 및 지체수준은 각 운행 시간대에 따라 현저한 차이를 보이고 있었는데, 심야 시간대를 이용하여 컨테이너 수송을 할 경우에는 다른 시간대에 비하여 50%정도의 수송시간 절감효과를 기대할 수 있었으며, 도시 고속도로를 이용할 경우에는 도시 간선도로에 비하여 30%정도의 수송시간을 절약할 수 있었다. 따라서 도시지역의 교통체중을 완화시키기 위해서 심야 시간대에 보다 많은 컨테이너 수송차량이 이용할 수 있는 컨테이너 수송체계가 확립되어야 하고, 산재해 있는 Off-Dock CY를 몇개의 ODCY그룹이나 단지까지 컨테이너 전용 고속도로의 건설이 바람직하고 생각된다.리구에서 조사한 결과 $10^{-3}$ M MGBG 단독 처리구에서 에틸렌 생성량이 가장 높았으며, spermidine과 spermine의 함량은 가장 낮았다. 부정근 형성능이 다소 회복된 $10^{-3}$ M MGBG+ $10^{-5}$M spermine 혼합처리구에서의 에틸렌 생성량은 대조구보다는 다소 높게 나타났다. 부정근 회복능이 가장 높았던 $10^{-3}$ M MGBG+ $10^{-5}$ M spermine + $10^{-4}$ M Cocl$_2$ 혼합처리구에서 에틸렌 생성량은 가장 낮게 나타났으며, polyamine 함량은 가장 높게 나타났다.(Cyperaceae), 명아주과(Chenopodiaceae) 같은 풀들이 하구언(estuary)의 해안가에 주로 서식하였던 것으로 나타났다. 이 시기동안에 해양성조류인 와편모류와 담수성 조류가 동시에 다양하게 산출되는 것은 하구언 퇴적환경이었음을 잘 지시해 준다. 제II화분대(고도, 43.72{\sim}3.36\;m$)가 시작되면서 혼합림은 침엽수림으로 바뀌었으며, 낙엽활엽수들의 서식지가 2엽소나무로 대치되면서 침엽수가 주요 수종을 이루었던 것으로 나타났다. 아마도 이런 산림형태는 자연 기후환경변화 뿐만 아니라 인간간섭에 의해 나타난 결과로 생각된다. 이 시기에 경작식물인 벼과(Gramineae), 옥수수(Zea), 메밀(Fagopyrum)과 논밭의 뚝 등지 에서 서식하는 돼지풀(Ambrosia) 등이 처음으로 산출되는 것으로 보아 인간간섭이 행해졌음을 잘 뒷 받침해준다. 또한 담수성 조류는 변함없이 산출되는 반면, 해양성조류인 와편모류가 산출되지 않는 것으로 보아 해안환경에서 다소 멀 어진

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.55-63
• /
• 2006

Speeding is one of the major causes of traffic accidnets in urban areas. Driver feedback sign(DFS) is a traffic control device that can be used for many traffic environments including work zones, school zones, and roadways. In this paper, the effectiveness of DFS was evaluated through a field study using speed data collected from before and after study periods. In addition traffic safety improvement was also quantitatively estimated using the variance of speed data collected. Staistical test results showed that the speed difference was statistically significant, and the distribution of speed data was also shifted greatly. Therefore, it was concluded that installing the DFS in roadways might lead to unifomity of speed of traffic flow, thus, potential safety improvement might be expected.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.178-184
• /
• 2011

Compressed Air Energy Storage (CAES) is a combination of energy storage and generation by storing compressed air using off-peak power for generation at times of peak demand. In general, both charging and discharging of high-pressure vessel are unsteady processes, where the pressure is varying. These varying conditions result in low efficiencies of compression and expansion. In this paper, a new constant-pressure CAES system to overcome the current problem is proposed. An energy analysis of the system based on the concept of exergy was performed to evaluate the energy density and efficiency of the system in comparison with the conventional CAES system. The new constant-pressure CAES system combined with pumped hydro storage requires the smaller cavern with only half of the storage volume for variable-pressure CAES and has a higher efficiency of system.