• International Area Studies Review
• /
• v.15 no.2
• /
• pp.101-123
• /
• 2011

The paper is basically attempted to reveal the factor price equalization(FPE) on Korea, United States, and Japan by the ARDL-bounds testing. Wage-rental ratio and relative commodity prices between Korea, United States, and Japan are analyzed by employing equality and convergence frameworks. Empirical evidences are shown that necessary and sufficient conditions for the FPE seems to be easily satisfied in a small country such as Korea rather than large ones as like United States and Japan. And, the FPE is more easily achieved by a nominal term rather than the real term. Due to the fact that an error correction term in the Error Correction Model is insignificant, direct mobility of labor and capital between the countries is not that effective to a short run adjustment. It implies that the FPE is in general going through a long run path. It also has to be mentioned that a trade policy has to selectively implemented depending on the weight of trading volumes and it has to be build up by a long run basis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.164-164
• /
• 2021

우리나라는 최근 도시화 및 산업화 등과 같은 유역개발이 가속화되면서 유역환경의 급격한 변화를 가져왔다. 도시화는 지표면의 불투수 면적을 증가시키고, 농업지역의 확대는 비료 및 농약의 사용을 증가시키고, 강우시 토양침식에 따른 흙탕물과 비점오염원의 수계 유출로 인해 수질악화 등의 문제를 야기시킨다. 이와 같은 유역환경의 변화는 수질에 직접적인 영향을 끼치므로, 미래 토지이용의 변화에 따른 하천유역의 유출특성과 영향 인자를 규명해야 효율적인 하천유역관리를 할 수 있다. 하지만 우리나라는 기후적 특성상 계절에 따른 수질 및 기후변수의 편차가 크기 때문에 하천유역관리에 있어 어려움이 많다. 특히 남한강 유역은 산림 및 고랭지밭 비중이 높은 지역이며, 여름철에는 강우로인한 토양침식이 심각하여 수질 및 수생태계 건강성을 악화시킨다. 남한강 상류 유역에는 송천과 도암호, 골지천과 같은 비점오염관리지역이 위치하고 있으며 현재까지도 하천유역관리가 어려운 지역에 해당한다. 본 연구는 남한강 유역에 위치한 17개 수질측정망을 대상으로 GIS시스템을 이용해 17개의 소권역으로 나누어 분석하였다. 토지이용자료는 환경공간정보 서비스의 2010년대 말 자료를 이용하였으며, 수질 자료는 유역환경 변화에 영향을 미칠 것이라 판단되는 수질 변수를 선별하여 10년동안의 장기간 수질 데이터를 이용하여 분석하였다. 16개의 수질변수는 정규성을 검증한 후 pairwisse t-test를 이용한 시기별 수질의 차이를 비교하였으며, 수질변수들과 토지이용매개변수 간에 상관관계를 찾아 유의관계가 있는지 확인함으로써 서로 다른 변수간에 상관성을 파악하고자 하였다. 유역의 특성별 상관도를 평가하고 해석하기 위하여 주성분 분석(Principal component analysis, PCA)을 실시하였다. 통계적 방법을 통해 시기에 따른 수질과 토지이용간의 관계를 밝힘으로써 미래하천유역관리에 기초자료로 활용될 것이다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.684-696
• /
• 1995

A mutant for chalky endosperm and genetic male sterility (GMS) was newly developed in rice. The two characters were found to be controlled by single recessive gene which has pleiotropic effect, indicating that chalky seeds should be GMS seeds in segregating populations. Chalky seeds showed the same shape and size as normal seeds. However, starch composition of central part of endosperm was looser and shape of starch granules was rounder compared with normal endosperm, resulting in significantly lower grain weight, absolute density and grain hardness in chalky grains than in normal ones. Amylose content and gel consistency of chalky grains were much lower and harder, respectively. Male sterile plants showed much shorter plant height, poorer panicle exsertion and lesser panicle number compared with normal plants. Microspore abortion stage in pollen developmental process was observed as before meiosis. Male sterility of the mutant was stable regadless of temperature and day length. A system breeding hybrid rice using this mutant was discussed, comp ring with other systems utilizing cytoplasmic-genic male sterility(CGMS) and environment sensitive GMS(EGMS). Separation of GMS seeds in mixed seed bulks by specific gravity (1.14∼1.16g / cm3) was successful about 85∼90%. But some mixed normal plants were seemed to be easily removed by the apparent difference in growth characters at seedling stage. The highest natural outcrossing rate of this GMS line was as 17.3 % in a plot treated with 2-row pollinator, I-row GMS, and GA3 + cutting of flag leaf + pollen-scattering by rope.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.219-225
• /
• 2012

Seed size has been considered as an effective criteria for selection of the most vigorous seeds in sorghum [(Sorghum bicolor (L) Moench]. The smaller seeds were inferior to the larger sizes in emergence and grain yield. This study was conducted to determine germination rate, field emergence and vigor of sorghum for selection of high quality seed by different seed size. Sorghum cultivar of two (Hwanggeumchal and Tojong) were separated into five seed size proportion (<2.36, 2.80, 3.15, 3.35 and >3.55 mm diam.) according to seed size. The larger seed was more higher 1,000 seeds weight, seed density, carbohydrates and protein content. Total seed germination performing varied 92% at the largest size (>3.55 mm diam.) frequently inferior to slightly 67% at smaller seed (2.36 to 2.80 mm diam.) in the standard germination test. Seed size did have a significant effect on mean emergence time (MET) and maximum emergence rate index (ERI) and percentage of emergence. It should be noted that the results refer to MET of sorghum seeds ranging from 4.26 to 4.74 days. The relationship of seed size was not only to stand establishment but to grain yield. Yield was most affected by seed size and large seeds were superior to the smaller seed in 25~37% of the cases. Especially, yield was significant under 3.15 mm the beginning.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.99-112
• /
• 2014

This paper addresses an assessment model for selecting PL(Private Level) product companies. The proposed model extracts the weights of evaluation elements based on AHP(Analytic Hierarchy Process). These evaluation elements are from real-world instances in a domestic hyper market. Especially, the model points at food products which constitute a large portion of entire profits in the market. In this model, we first classify the 54 evaluation elements into 4 layers and secondly carry out a survey with relevant specialists based on them. We also estimate the weights of evaluation elements according to pairwise comparisons from the survey, and propose them as a quantitative alternative which can be applied in real-world problems. Finally, the pilot-study is conducted to compare the proposed model with the existing simple summation method. From this study, HACCP system assessment and Review(0.279281), Transportation(0.117706) and Fundamental law observance(0.066392) are presented as the key evaluation elements for selecting PL product companies. The proposed model facilitates the company selection among those candidate companies which is not easy to determine the superiority by reflecting the importance of evaluation elements.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.373-378
• /
• 2003

Korea's overseas construction industry has been rather depressed by the weakened profitability as well as the sharp decrease of the market shares due to the lack of international competitiveness and the declined international market following the outbreak of Iraq war. There exist a lot of various risks in performing the overseas construction, and especially EPC projects, which entail complicated process from different parts, also require a sophisticated procurement and management skill. Subsequently, to survive in the competitive international market, we need to establish strategies to select potentially profitable projects at the initial stage of bidding process and to mitigate the high degree of risk exposures through contract negotiation and its adjustment. This research provides the profitability evaluation bases, with which overseas construction participants can forecast and analyze the risk more systematically, by eliciting profit-influencing factors from real overseas construction projects and structuring their cause-and-effect relationships. The profitability causal hierarchy structure describes the profitability factors' hierarchy in details and their interrelationships. It also enables us to find out critical factors directly related to profitability aggravation through a qualitative analysis. Ultimately, with this hierarchy structure as the base, the research will suggest how to develop the quantitative profitability forecasting model.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.664-679
• /
• 2008

This paper attempts to evaluate the local economy and the local economic development policy in Goryeong County and to propose some policy alternatives for local economic development. Goryeong County has a locational advantage, which is not just geographically proximate to Daegu, a large metropolis, but also connected directly to the national highway networks. This region can also be regarded as a rural area, in a sense that the primary industry still plays a more important role for the local economy than the secondary industry and the tertiary industry. However, it is problematic that the local economic development strategies of Goryeong are universal rather than strategic and systematic. In order to design an effective regional economic development policy, the policy makers are necessary to deliberately consider regional specificity and geo-political and geo-economic situations around the region. In addition, it is important to say that policy makers, particularly in rural regions, need to break from the fantasy of high-tech industries. In this context, I propose some region-specific and context-specific policy ideas, including the promotion of the agro-food cluster and the build-up of the em-industrial complexes specialized in mechatronics and transportation equipment manufacturing.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.105-112
• /
• 2016

The drying test was carried on the globular type cow manure pellet for use in solid fuel applications. The globular type cow manure pellet fuel was sorted according to size by rotatory sieves. The three kind of drying methods such as convection hot-air drying method, infrared ray drying method and superheated steam method were used to dry the globular type cow manure pellet. Among the three kind of drying methods, superheated steam method of dry time was the shortest. The apparent specific gravity and low calorific value of dried cow manure pelltes was about $250{\sim}350kg/m^3$ and above 3,000 kcal/kg respectively. The smaller the particle size of cow manure pellets, the less drying time was required. The time was required very less for drying smaller particle size cow manure pellet when compared to larger size. In the case of the same drying condition, it has been found that reducing the particle size of cow manure fuel pellet is an important factor for shortening the drying time of the livestock manure pellet.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.47-56
• /
• 2008

The aim of this study is to produce cokes which can be used for the production of ferroalloy, for this purpose, domestic anthracite mixed with plastic was sintered at various condition. The combustion and physical properties of anthracite and plastic, coal separation, and the influence of factors on the strength of coke were investigated. The results of this study are as follows: 1. The three kinds of anthracite from the Samcheok region contained 25 to 30% ash of $100{\mu}m$ over size, and have the caloric value of 5,205 cal/g(TaeAn), 4,893 cal/g(JangSung), 4,873cal/g(KyongDong). 2. The recommendable conditions for heavy-fluid separation of the Samcheok coal are to set the specific gravity of heavy fluid to 2.4 and control the size of coal to $35{\sim}140mesh$. 3. It is concluded that phenolic resin powder, liquefied phenolic resin, SAN, and melamine resin can be used as a binder for the anthracite cokes, from the thermal analysis of various plastics. Especially, the liquefied phenolic resin was considered as the most suitable binder as it would simplify the process.