• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.74-82
• /
• 2014

The purposes of this study is to investigate spatial structure characteristics of earthen walled fortresses based on topography, which are locational and Plane morphology, Cross sections of earthworks. Target areas of this study are 37 earthen walled fortresses which are designated as cultural properties. This study is conducted with methodologies of literature review, field investigation, investigation on topography materials and relation analyses of topography&spatial structure. The results from study on spatial structure of earthen walled fortresses are as follows. First, Earthen walled fortresses on flat topography were adjacent to water systems like rivers or streams. Plane morphology showed regular shapes. The cross section morphology presented trapezoid the most with earthworks of which outer and inner walls were built. Second, More than 70% of earthen walled fortresses on hilly topography had water system within close range of approximately 1.5km. Plane morphology was mainly with more than 73% of irregular types. Cross sections of earthworks were of morphology with more than 86% of bordered type and another type leaning against existing topography like mountains. Third, 59% of earthen walled fortresses in mountain areas had water system within their close range, which indicated that they depended on external water system less than those with hilly topography. Plane morphology was mainly with more than 67% of irregular types. Cross sections of earthworks were of monoslope method with more than 94% of bordered type and another type leaning against mountains.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.371-375
• /
• 2009

Electron spin resonance (ESR) spectroscopy was used to detect radiation-induced signals from irradiated spices and ESR parameters were analyzed to define specific signals. Four powdered spices (red pepper, garlic, onion, and black pepper) were irradiated with 0, 1, 5, or 10 kGy at room temperature using a [60Co] gamma-ray irradiator prior to ESR analysis. Radiation-induced triplet signals, including those from the cellulose radical, which are center signals ($g_2=2.00673$) within the range of 3.0455 mT, were observed in all irradiated spice samples. The parameters g-value, center field, and signal range of hyperfine triplet ESR signals were constant in all irradiated samples, being specific for cellulose radicals and thereby distinguishing these signals from those of nonirradiated control samples. High positive correlation coefficients ($R^2=0.8452-0.9854$) were obtained between irradiation doses and corresponding ESR signal intensities. Thus, reliable detection of irradiated dried spices by measurement of ESR cellulose signals was confirmed by parameter analysis for the cellulose radical.

• Clinical and Experimental Pediatrics
• /
• v.45 no.8
• /
• pp.1028-1032
• /
• 2002

Subcutaneous pannicultis-like T cell lymphoma is a rare cutaneous T cell lymphoma. It presents with multiple subcutaneous nodules or plaques involving the extremities or trunk, and with constitutional symptoms that include fever, malaise, fatigue, myalgia, chills and weight loss. Histologically, the lesions of this disease are reminiscent of panniculitis and are composed of a mixture of small and large atypical lymphoid cells infiltrating between adipocytes. The optimal treatment for this disease is undefined and prognosis of this disease is poor, even when treated with multiagent chemotherapy regimens considered optimal for agressive lymphoma of other types. Poor prognosis factors include clinical features such as anemia, leukocytopenia, hepatosplenomegaly, lymphadenopathy and coagulopathy, which are suggestive of hemophagocytosis. Much of the mortality of this disease is due not to disseminated lymphoma with organ failure, but rather to complications of the cytopenias associated with the hemophagocytic syndrome. We report a case of subcutaneous panniculitis-like T cell lymphoma in a 12 year-old boy who presented with initial complaints of fever and multiple subcutaneous nodules, and briefly review the related literature.

• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.13-33
• /
• 2020

This study proposes a Korean sentimental analysis algorithm that utilizes a letter-unit embedding and convolutional neural networks. Sentimental analysis is a natural language processing technique for subjective data analysis, such as a person's attitude, opinion, and propensity, as shown in the text. Recently, Korean sentimental analysis research has been steadily increased. However, it has failed to use a general-purpose sentimental dictionary and has built-up and used its own sentimental dictionary in each field. The problem with this phenomenon is that it does not conform to the characteristics of Korean. In this study, we have developed a model for analyzing emotions by producing syllable vectors based on the onset, peak, and coda, excluding morphology analysis during the emotional analysis procedure. As a result, we were able to minimize the problem of word learning and the problem of unregistered words, and the accuracy of the model was 88%. The model is less influenced by the unstructured nature of the input data and allows for polarized classification according to the context of the text. We hope that through this developed model will be easier for non-experts who wish to perform Korean sentimental analysis.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.1
• /
• pp.7-13
• /
• 2002

Purpose : Preliminary report of the technique and trial of double bundle PCL reconstruction using Achilles allograft. Materials and Methods : From May 1999 to July 2000, 8 cases of PCL insufficient patients were treated with Achilles allograft reconstruction using the double bundle and double femoral tunnel technique. The tibial tunnel was prepared anteromedially. All other combined injuries within the knees were treated accordingly. Minimal follow-up period was 1 year. The results was assessed from the point of function and stability using Lysholm knee score and KT-2000 arthrometer. Results : Up to present follow up. 8 patients showed good sign of recovery with no instability (translation less than 2 mm) except olio that has been grafted-ligament rupture. In addition, none showed any sign of infection nor ROM limitation. Two complications were seen, which one had grafted-bone fracture and the other grafted-ligament rupture. The former occurred during operation and the latter occurred due to improper protection. Conclusion : Presently the follow up period is too short to draw any conclusive opinion but it is essential to select healthy and well sterilized allografts fur successful outcome. Double femoral tunnel technique seems to be more physiologic in PCL reconstruction. With these prerequisites, it seems to be a good alternative to use Achilles allografts fur the reconstruction of PCL. However, a longer follow-up is needed.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.27-44
• /
• 2020

In order to solve the user's information overload problem, recommender systems infer users' preferences and suggest items that match them. The collaborative filtering (CF), the most successful recommendation algorithm, has been improving performance until recently and applied to various business domains. Visual information, such as book covers, could influence consumers' purchase decision making. However, CF-based recommender systems have rarely considered for visual information. In this study, we propose VizNCS, a CF-based deep learning model that uses visual information as additional information. VizNCS consists of two phases. In the first phase, we build convolutional neural networks (CNN) to extract visual features from image data. In the second phase, we supply the visual features to the NCF model that is known to easy to extend to other information among the deep learning-based recommendation systems. As the results of the performance comparison experiments, VizNCS showed higher performance than the vanilla NCF. We also conducted an additional experiment to see if the visual information affects differently depending on the product category. The result enables us to identify which categories were affected and which were not. We expect VizNCS to improve the recommender system performance and expand the recommender system's data source to visual information.

• Informatization Policy
• /
• v.23 no.3
• /
• pp.26-42
• /
• 2016

Recently, with the rapid growth of the O2O market, Fintech combining the finance and ICT technology is drawing attention as innovation to lead "O2O of finance", along with Fintech-based payment, authentication, security technology and related services. For new technology industries such as Fintech, technical sources, related systems and regulations are important but previous studies on Fintech lack in-depth research about systems and technological trends of the domestic Fintech industry. Therefore, this study aims to analyze domestic Fintech trends and find the insights for the direction of technology and systems of the future domestic Fintech industry by comparing Kakao Pay and Samsung Pay, the two domestic representative mobile payment services. By conducting a complete enumeration survey about the tweets mentioning Fintech until June 2016, this study visualized topics extraction, sensitivity analysis and keyword analyses. According to the analysis results, it was found that various topics have been created in the technologies and systems between 2014 and 2016 and different keywords and reactions were extracted between topics of Samsung Pay based on "devices" such as Galaxy and Kakao Pay based on "service" such as KakaoTalk. This study contributes to analyzing the unstructured data of social media by period by using social media mining and quantifying the expectations and reactions of consumers to services through the sentiment analysis. It is expected to be the foundation of Fintech industry development by presenting a strategic direction to Fintech related practitioners.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.37-43
• /
• 2019

Since 3D printed concrete can be constructed without formwork, it is easy to construct an atypical structure, and the construction time and labor cost can be reduced. However, since the construction is exposed to the outside, shrinkage cracking due to moisture loss inside and outside the concrete occurs. Therefore, in order to improve the durability of the 3D printed concrete, a shrinkage reduction plan of the 3D printed concrete is required. In this study, glycol-based and alcohol-based shrinkage reducing agents were fabricated and evaluated for their performance. The shrinkage reducing agent samples showing excellent performance were selected and applied to 3D printed concrete. As a result, the compressive strength was increased by more than 10% and the shrinkage was reduced by more than 36% when using a shrinkage reducing agent. It is expected that the production of high quality 3D printed concrete will be possible because it is possible to increase the compressive strength and reduce the amount of dry shrinkage by applying a shrinkage reducing agent for 3D printed concrete.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.139-156
• /
• 1995

A set of field investigations was performed to estimate accurately the predominant periods of seismic 8round motions and the attenuation characteristics of the seismic ground vibration. Predominant periods of ground motions were estimated from the measurement of the continuous microseismic vibratins of certain periods, inherent in the ground and in the buildings, utilizing the high sensitivity digital velocity seismometer consisting of 3-component geophones and a digital seismograph. Estimated predominant periods of microseismic vibraion of the ground(measured on'the ground surface) and the building (measured on the second floor) were in the range of 0.18~0.235 sec. and 0.26~0.31 sec. respectively. The subsurface structure of the site ground was surveyed by the seismic refraction method utilizing the digital seismicwave probing system. The ground structure was found to be a two-layered system : an upper top soil layer of 7m in thickness with the P-wave velocity of 662m1sec and a lower layer of silty-clayey soils with the P -wave velocity of 2210m1 sec. The attenuation characteristics of the seismic ground vibrations were determined by the amplitude decay measurement method us;ng the Seisgun, which produces strong artificial seismic energy. Measured spatial attenuation coefficients of the ground vibration in vertical(Z) longitudinal(X), transverse(Y) direction were 0.1137, 0.0025, and 0.0290 respectively. Estimated Spartial QP's (inverse of the specific dissipation constant w.r.t. shear waved of X, Y, and Z directions were in the range of 5.913~7.575, 32.371~41.452, 2.794~3.579 re spectively. This indicates that aseimic design of the structures on the site should take stronger consideration regarding the earthquake resistance characteristics of the structures against longitudinal ground motion.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.213-218
• /
• 2015

In parallel with evolving information communication technology, M2M(Machine-to-Machine) industry has implemented multi-functional and high-performance systems, and made great strides with IoT(Internet of Things) and IoE(Internet of Everything). Authentication, confidentiality, anonymity, non-repudiation, data reliability, connectionless and traceability are prerequisites for communication security. Yet, the wireless transmission section in M2M communication is exposed to intruders' attacks. Any security issues attributable to M2M wireless communication protocols may lead to serious concerns including system faults, information leakage and privacy challenges. Therefore, mutual authentication and security are key components of protocol design. Recently, secure communication protocols have been regarded as highly important and explored as such. The present paper draws on hash function, random numbers, secret keys and session keys to design a secure communication protocol. Also, this paper tests the proposed protocol with a formal verification tool, Casper/FDR, to demonstrate its security against a range of intruders' attacks. In brief, the proposed protocol meets the security requirements, addressing the challenges without any problems.