• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.113-120
• /
• 2011

A technique for measuring the thermal diffusivity of nanofluids is proposed in this study. In theory, it has been well known that the transient hot-wire method can be used to measure the thermal conductivity and diffusivity of fluids simultaneously. However, when traditional methods were employed, the accuracy of the calculated thermal conductivity was considerably higher than that of diffusivity. The proposed method has two advantages for practical use: it only needs a simple data-conversion process for calculating the diffusivity, and it can skip the tedious calibration process involved in the case of a wire sensor. A validation experiment for the new system has been performed with the basic fluids, and the comparison experiment to compare the change in diffusivity of the base oil and the change in diffusivity of the nano oil has been carried out. It is expected that the present system will provide numerous methods for investigating the variation in the thermal properties other than thermal conductivity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.767-776
• /
• 1985

Unsteady thermally stratified flow caused by two-dimensional surface discharge of warm water into a oblong channel was investigated. Experimental study was focused on the rapidly developing thermal diffusion at small Richardson number. The basic objective were to study the interfacial mixing between a flowing layer of warm water and an underlying body of cold water and to accumulate experimental data to test computational turbulence models. Mean velocity field measurements were carried out by using NMR-CT (Nuclear Magnetic Resonance-Computerized Tomography). It detects quantitative flow image of any desired section in any direction of flow in short time. Results show that at small Richardson number warm layer rapidly penetrates into the cold layer because of strong turbulent mixing and instability between the two layers. It is found that the transfer ofheat across the interface is more vigorous than that of momentum. It is also proved that the NMR-CT technique is a very valuable tool to measure unsteady three dimensional flow field.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.18-27
• /
• 2019

The flow mixing characteristics for the heated dual jets were numerically studied by using URANS (unsteady Reynolds-averaged Navier-Stokes). The increased turbulent diffusion was obtained for the compressible flow, and the thermal diffusion of incompressible flow increased more than that of compressible flow. From the results of FFT and phase portraits, periodic and quasi-periodic states were observed as the jet spacing increased. It was observed that linear variations of merging points and combined points were different because unsteady flow determined the flow mixing characteristics for a large jet spacing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.154-160
• /
• 1982

One dimensional unsteady heat conduction was studied on soybean curd as a water-protein-fat food system. This heterogeneous soybean curd could be treated as homogeneous material as for the unsteady heat conduction by 'effectiver' thermal diffusivity. Measurements were made with a apparatus designed and constructed by the author and also made with ice to establish the reliability, the reproducibility and the accuracy of the apparatus. It was found that the effective thermal diffusivity of soybean curd was substantially dependent on the fraction of protein and fat as well as water.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.3
• /
• pp.156-163
• /
• 1977

길이방향의 열전도효과가 비교적 큰유체- 고체 열교환계내에 일정한 조ㅍ은 온도를 가진 유체가 유입될 때 이에 따른 비정상 온도분포가 해석되었다. 이러한 계를 기술하는 연립편미분 방정식의 수치해가 유한차분법에 의해 구해졌으며, 열전도가 무시된 경우에 대한 해석적 해를 구하여 위의 결과를 검증하였다. 한편 이상화된 모델에 대한 실험을 행하고 이 결과를 앞서 구한 수치해와 비교 검토하였다. 여기서 구해진 온도분포를 이용하여 축열효율${\eta}_A$및 ${\eta}_B$를 ${\eta}_A$는 시간 t에서의 축열량과 정상상태에 도달했을 때의 축열량의 비로 , 그리고 ${\eta}_B$는 시간 t 동안의 축열된 양과 공급된 열량의 비고 정의하여 온도분포와 효율들에 애하여 시간변수 .tau., 위치변수 .xi.와 무차원 열확산율 .betha.가 미치는 영향을 조사하였다. 이에 따르면 온도는 .betha. 가 적어짐에 따라 점점 가파르게 분포되고 한편 ${\eta}_A$는 .tau.가 점점 커지거나, .xi.가 작아질수록 좋아지는 것을 알 수 있다. 또한 ${\eta}_B$는${\eta}_A$와는 정반대의 경향을 보여주어 축열계의 최적상태가 존재함을 알 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.655-662
• /
• 1985

화염스트레치와 확산선호도가 예혼합화염에 미치는 영향을 몇가지 모델에 대해 현상적으로 고 찰하였다. 즉, 정상상태의 구형화염, 구형으로 전파되는 화염, 균일유동장내의 곡면화염, 일차원 평면화염, 그리고 확대유동장내에서 스트레치된 평면화염등을 고찰하였으며, 이 해석의 결과는 화염면의 면적 변화율로 정의된 화염스트레치의 제인자들 즉, 비균일 접선속도장과 전파화염의 곡률에 의한 영향들이 공통적 특성을 나타냄을 보여주고 있다. 화염스트레치와 확산선호도가 화염전파속도에 미치는 복합효과는 세가지로 나타나는데 이는 화염온도의 변화에 따른 화학반 응강도의 변동, 열 및 물질확산의 강도차이, 그리고 대류 및 확산전달의 방향의 상이함에 기인 한다.

• Journal of KIISE:Software and Applications
• /
• v.28 no.6
• /
• pp.429-438
• /
• 2001

정보통신 구조의 확산과 함께 전산시스템에 대한 침입과 피해가 증가되고 있으며 침입탐지 시스템에 대한 관심과 연구가 늘어나고 있다. 본 논문에서는 은닉 마르코프 모델(HMM)을 이용하여 사용자의 정상행위에서 생성된 이벤트ID 정보를 모델링한 후 사용자의 비정상행위를 탐지하는 침입탐지 시스템을 제안한다. 전처리를 거친 이벤트ID열은 전방향-역방향 절차와 Baum-Welch 재추정식을 이용하여 정상행위로 구축된다. 판정은 전방향 절차를 이용해서 판정하려는 열이 정상행위로부터 생성되었을 확률을 계산하며, 이 값을 임계값과 비교함으로써 수행된다. 실험을 통해 침입탐지를 위한 최적의 HMM 매개변수를 결정하고 사용자 구분이 없는 단일모델링, 사용자별 모델링, 사용자 그룹별 모델링 방식을 비교하여 정상행위 모델링 성능을 평가하였다. 실험결과 제안한 시스템이 발생한 침입을 적절히 탐지함을 확인할 수 있었지만, 신뢰도 높은 침입탐지 시스템의 구축을 위해서는 보다 정교한 모델의 클러스터링이 필요함을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.451-460
• /
• 1983

Computational four-equation turbulence model is developed and is applied to predict twodimensional unsteady thermal surface discharge into a reservoir. Turbulent stresses and heat fluxes in the momentum and energy equations are determined from transport equations for the turbulent kinetic energy (R), isotropic rate of kinetic energy dissipation (.epsilon.), mean square temperature variance (theta. over bar $^{2}$), and rate of destruction of the temperature variance (.epsilon. $_{\theta}$). Computational results by four-equation model are favorably compared with those obtained by an extended two-equation model. Added advantage of the four-equation model is that it yields quantitative information about the ratio between the velocity time scale and the thermal time scale and more detailed information about turbulent structure. Predicted time scale ratio is within experimental observations by others. Although the mean velocity and temperature fields are similarly predicted by both models, it is found that the four-equation model is preferably candidate for prediction of highly buoyant turbulent flows.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.139-147
• /
• 2000

Non-Fickian (or anomalous) diffusion was observed in transient sorption of aromatic solvents(such as benzene, toluene, and chlorobenzene) in fluoropolymers (such as ETFE, ECTFE and PVDF). In this study, five other transient sorption models (Crank, Long ＆ Richman, Berens ＆ Hopfenberg, Neogi, Li) based on Fick's law were employed to fit the anomalous sorption data for aromatic solvents. The adjustable parameters were determined by least square analysis of the measured and predicted fractional uptake. For ETFE sorption data slightly deviating from Fickian behavior, all the models exhibited satisfactory results in fitting the anomalous sorption data. In particular, Neogj model predicted intrinsic diffusivity (0.4～0.8$\times$10$^{-5}$ $\textrm{cm}^2$/day) and equilibrium diffusivity (0.13～0.31$\times$10$^{-4}$ $\textrm{cm}^2$/day) as well as relaxation kinetics related to non-Fickain diffusion. For a typical sigmoidal sorption behavior in PVDF, only Crank's model could give the reasonable evaluation on transport properties. The ratio of intial diffusivity (D$_{i}$) to final equilibrium diffusivity (D$_{\infty}$) was ranged from 80 to 200. For the final stage of uptake In ECTFE with drastic acceleration, all the models exhibited significant deviations from the sorption data. New diffusion models based on thermodynamics and continuum mechanics should be employed to get valuable information on transport properties as well as relaxation kinetics coupled with non-Fickian diffusion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1147-1152
• /
• 2013

In this study, the effect of an insulation coating on the start time of a linear region is theoretically investigated when an insulation-coated hot-wire is used for the transient hot-wire method (THWM). For this purpose, important parameters affecting the start time of the linear region are presented from an analytical solution of temperature-rise for an insulation-coated hot-wire. Furthermore, a critical time to ignore the influence of important parameters is studied. The theoretical results indicate that the effect of the insulation coating rapidly disappears with a decrease in the wire radius, coating thickness, thermal diffusivity of insulation material or an increase in the thermal conductivity of the insulation material. The results of this study will be helpful for selecting a proper start time of the linear region for the THWM using insulation-coated hot-wires.