• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.305-314
• /
• 2023

With the development of medical technology and radiation treatment equipment, the frequency of high-precision radiation therapy such as intensity modulation radiation therapy has increased. Image-guided radiation therapy has become essential for radiation therapy in precise and complex treatment plans. In particular, with the introduction of imaging equipment for diagnosis in a linear accelerator, CBCT scanning became possible, which made it possible to calibrate and correct the patient's posture through 3D images. Although more precise reproduction of the patient's posture has become possible, the exposure dose delivered to the patient during the image acquisition process cannot be ignored. Radiation optimization is necessary in the field of radiation therapy, and efforts to reduce exposure are necessary. However, when acquiring 3D CBCT images by changing the imaging conditions to reduce exposure, there should be no image quality or artefacts that would make it impossible to align the patient's position. In this study, Rando phantom was used to scan and evaluate images for each shooting condition. The highest SNR was obtained at 100 kV 80 mA 25 ms F1 filter 180°. As the tube voltage and tube current increased, the noise decreased, and the bowtie filter showed the optimal effect at high tube current. Based on the actual scanned images, it was confirmed that patient alignment was possible under all imaging conditions, and that image-guided radiation therapy for patient alignment was possible under the condition of 70 kV 10 mA 20 ms F0 filter 180°, which showed the lowest SNR. In this study, image evaluation was conducted according to the imaging conditions, and low tube voltage, tube current, and small rotation angle scan are expected to be effective in reducing radiation exposure. Based on this, the patient's exposure dose should be kept as low as possible during CBCT imaging.

• The Journal of Society for e-Business Studies
• /
• v.21 no.2
• /
• pp.1-22
• /
• 2016

News contents has been collected, selected, edited and sometimes distorted by the news recommendation mechanisms of online portals in nowadays. Prior studies had not confirmed the consensus of newsworthiness, and they had not tried to empirically validate the impacts of newsworthiness on audience reactions. This study challenged to summarize the concepts of newsworthiness and validate the impact of representativeness of both editor's and audience's perspective on audience reactions as perceived news quality, trust on news portal, perceived usefulness, service satisfaction, loyalty, continuous usage intention, and word-of-mouth intention by adopting the representativeness heuristics method and information adoption model. 357 valid data had been collected using a scenario survey method. Subjects in each groups are exposed by 3 news recommendation mechanisms: 1) the time-priority news exposure mechanism (control group), 2) the reference-score-based news recommendation mechanism (a single treatment group), and 3) the major-news-priority exposure mechanism sorting by the reference scores made by peer audiences (the mixed treatment group). Data had been analyzed by the MANOVA and PLS method. MANOVA results indicate that only mixed method of both editor and audience recommendation mechanisms impacts on perceived news quality and trust. PLS results indicate that perceived news quality and trust could significantly affect on the perceived usefulness, service satisfaction, loyalty, continuance usage, and word-of-mouth intention. This study would contributions to empathize the role of information technology in media industry, to conceptualize the news value in the balanced views of both editors and audiences, and to empirically validate the benefits of news recommendation mechanisms in academy. For practice, the results of this study suggest that online news portals would be better to make mixed news recommendation mechanisms to attract audiences.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.660-673
• /
• 2001

In Video-on-Demand (VoD) servers, disk throughput is an important system design parameter because it is directly related to the number of user requests that can be served simultaneously. In this paper, we propose an efficient periodic request grouping scheme for disk array-based VoD servers that reduces the disk seek time, thus improving the disk throughput of VoD disk arrays. To reduce the disk seek time, the proposed scheme groups the periodic requests that access data blocks stored in adjacent regions into one, and arranges these groups in a pre-determined order (e.g., in left-symmetric or right-symmetric fashion). Our simulation result shows that the proposed scheme reduces the average disk bandwidth required by a single video stream and can serve more user requests than existing schemes. For a data block size of 192KB, the number of simultaneously served user requests is increased by 8% while the average waiting time for a user request is decreased by 20%. We also propose an adaptation technique that conforms the proposed scheme to the user preference changes for video streams.

• Journal of KIISE:Software and Applications
• /
• v.28 no.1
• /
• pp.52-63
• /
• 2001

필기 단어 인식 방법에는 낱자별 분할 및 낱자 단위 인식을 통해 인식하는 방법과 단어 사전을 이용하여 단어와 영상을 직접 비교하는 방법이 있다. 이 중 후자는 인식 대상이 되는 단어들이 작은 수의 어휘로 제한되었을 대 매우 효과적이다. 본 논문에서는 입력 영상이 주어졌을 때 자모를 순차적으로 탐색하고 그 결과의 최적 조합을 찾아 인식하는 사전을 이용한 필기 한글 단어 인식 방법을 제안한다. 입력 영상은 사전의 각 단어와의 매칭을 통해 인식된다. 단어는 필기 순서로 정렬된 자모열로 표현하고 입력 영상은 획들의 집합으로 표현한다. 단어의 자모들은 입력 영상으로부터 추출된 획들의 집합으로부터 단계적으로 탐색된다. 각 단계에서는 전 단계까지의 매칭 상태와 탐색하려는 자모의 형태로부터 자모가 존재할 것이라고 기대되는 정합 기대 영역을 설정한 후 그 안에서 자모 탐색기를 이용해 자모를 찾는다. 자모 탐색기는 획들의 집합으로 이루어진 복수의 자모 후보와 그 점수를 출력한다. 각 단계마다 생성된 자모 후보들은 최적의 단어 매칭을 찾기 위한 탐색 공간을 이룬다. 본 연구에서는 단어 사전을 trie로 구성하고, 탐색 과정에서 dynamic programming을 이용하여 효과적으로 탐색을 수행하였다. 또한 인식 속도를 향상시키기 위해 산전 축소, 탐색 공간 축소 등 다양한 지식을 이용하였다. 제안하는 방법은 무제약으로 쓰여진 필기 단어도 인식 할 수 있을 뿐 아니라, 동적 사전을 이용하기 때문에 사전의 내용이 변하는 환경에서도 적용할 수 있다. 인식 실험에서는 39개의 단어로 이루어진 사전에 대하여 613개의 단어 영상에 대해 실험한 결과 98.54%의 높은 인식률을 보임으로써 제안하는 방법이 매우 효과적임을 확인하였다. 아니라 곰팡이 균주도 실제 praxis에 적합하게 개발시킬수 있다. 따라서 앞으로 발효육제품제조에 있어 starter culture가 갖는 의미는 매우 중요하며 특히 짧은 숙성기간을 거치는 발효소시지의 제조에 있어서는 필수불가결한 공정의 한 분야로 자리잡게 될 것이다.큰 차이 없었으나 이중포장과 진공포장은 상당히 효과적임을 알 수 있었다.로는 18%에 비하여 22%가 더 적합한 것으로 생각되었다.$0.15{\sim}0.35%$이었다.irc}C$에서 $13.49{\times}10^{-3}$이었다. 이 값들을 Arrhenius식에 대입하여 구한 활성화 에너지는 24.795 kJ/Kmol이었다. 이 값으로부터 결정한 살균 포장약주 명가의 상용 저장 수명은 $10^{\circ}C$에서 2년, $20^{\circ}C$에서 1년 4개월, $25^{\circ}C$에서 1년 2개월 이었다. 서울의 매월 평균 온도를 기준으로 계산할 때 본제품의 상용저장기간은 1년 8개월이었다.로 반죽이 호화되고 가열시간이 그 이상으로 증가할 때도 반죽의 호화가 약간은 진행되지만 $90^{\circ}C$ 이상의 가열온도에서는 가열시간 0.5분 이내에 반죽의 호화가 급속히 일어나고 가열 시간을 증가시켜도 더이상의 호화는 일어나지 않았다. 같은 조건에서는 waxy corn starch 반죽의 호화 속도가 corn starch보다 더 빠른 것으로 나타났다. 대표적으로 52% 수분함량에서 반응속도상수(k)와 가열온도(T)사이의 관계식은 corn starch의 경우 $logk=11.1140-4.1226{\times}10^3(1/T)

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.149-161
• /
• 2005

Catadioptric mirrors are widely used in automatic surveillance system. The major drawback of catadioptric mirror is its unequal image resolution. Equidistance catadioptric mirror can be the solution to this problem. Even double panoramic structure can generate stereo images with single camera system. So two images obtained from double panoramic equidistance catadioptric mirror can be used in finding the depth and height values of object's points. But compared to the single catadioptric mirror. the image size of double panoramic system is relatively small. This leads to the severe accuracy problem in estimation. The exact axial alignment and the exact mount of mirror are the sources that can be avoided but the focal length variation is inevitable. In this paper, the effects of focal length variation on the computation of depth and height of object' point are explained and the effective focal length finding algorithm, using the assumption that the object's viewing angles are almost same in stereo images, is presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1207-1212
• /
• 2015

A vibro ripper utilizes high-frequency vibration for rock fragmentation. This concept is different from those used by other existing breakers. The gearbox-shank welded joint of a vibro ripper is a very important part. Because it delivers the vibromotive force to the tooth, it is important to predict its soundness. This study was conducted to predict the fatigue life under welding conditions. The shank materials were Hardox-Hituf and AR400, and the filler metals were CSF-71T and CSF-81T. Fatigue tests were conducted under each set of conditions. P-S-N curves are presented based on the statistical testing method recommended by JSME-S002, and a comparison is made of the results under each set of conditions. The life was estimated using a P-S-N curve.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.816-824
• /
• 2009

In the face space, face images due to illumination and pose variations have a nonlinear distribution. Active Appearance Models (AAM) based on the linear model have limits to the nonlinear distribution of face images. In this paper, we assume that a few clusters of face images are given; we build local AAMs according to the clusters of face images, and then select a proper AAM model during the fitting phase. To solve the problem of updating fitting parameters among the models due to the model changing, we propose to build in advance relationships among the clusters in the parameter space from the training images. In addition, we suggest a gradual model changing to reduce improper model selections due to serious fitting failures. In our experiment, we apply the proposed model to Yale Face Database B and compare it with the previous method. The proposed method demonstrated successful fitting results with strongly illuminated face images of deep shadows.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.627-635
• /
• 2016

When many processes issue write operations alternately on Log-structured File System (LFS), the created files can be fragmented on the file system layer although LFS sequentially allocates new blocks of each process. Unfortunately, this file fragmentation degrades read performance because it increases the number of block I/Os. Additionally, read-ahead operations which increase the number of data to request at a time exacerbates the performance degradation. In this paper, we suggest a new cleaning method on LFS that minimizes file fragmentation. During a cleaning process of LFS, our method sorts valid data blocks by inode numbers before copying the valid blocks to a new segment. This sorting re-locates fragmented blocks contiguously. Our cleaning method experimentally eliminates 60% of file fragmentation as compared to file fragmentation before cleaning. Consequently, our cleaning method improves sequential read throughput by 21% when read-ahead is applied.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1454-1464
• /
• 2013

In this paper, we propose a rapid rigid registration method for the fusion visualization of intra-operative 2D XA and pre-operative 3D CTA images. In this paper, we propose a global movement estimation based on a trilateration for the fast and robust initial registration. In addition, the principal axis of each image is generated and aligned, and the bounding box of the vascular shape is compared for more accurate initial registration. For the fine registration, two images are registered where the distance between two vascular structures is minimized by selective distance measure. In the experiment, we evaluate a speed, accuracy and robustness using five patients' data by comparing the previous registration method. Our proposed method shows that two volumes can be registered at optimal location rapidly, and robustly comparing with the previous method.