• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.981-989
• /
• 1990

본 연구에서는 유한체적법에 의한 4단계 Runge-Kutta방법으로 2차원 익열에 대한 비점성 천음속 유동장에 대한 해석을 수행하기로 하는데 이는 경계층방정식에 대 한 경계조건으로 이용될 수 있고 3차원 계산시 그 기초자료가 될 수 있을 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.387-395
• /
• 2015

A technique for calculating the additive drag of the inlet in supersonic flow was studied using commercial CFD software, STAR-CCM+, which provides a efficient way of 3 dimensional flow analysis with polyhedron-shaped grid system. Three configurations were chosen and applied to the calculation with various flow conditions of two different free stream Mach No. and some mass flow ratios. Comparisons with results from wind tunnel test gave good agreements. Though computation were carried out with the inviscid and compressible flow around the supersonic inlet for the supercritical condition, ignoring the viscous effects is concluded to give little effects on the accuracy of the additive drag calculation and to make the calculation more efficient owing to less effort and time consumed for grid system build-up and for iteration because of less grid number and simpler boundary condition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.279-286
• /
• 1999

Wall-bounded 유동과 달리 자유 전단 유동은 Hyperbolic Tangent Profile을 가지고 비점성 불안정에 의해 지배된다. 따라서 자유 전단 유동에서 난류로의 천이과정은 비점성 불안정성 이론에 의해 해석되어 진다. 본 연구는 분리판(Splitter plate)에 의해 분리된 속도가 다른 자유 유속의 혼합에 의해 형성되는 혼합층에서 와류병합과정에 대한 속도비의 영향에 대하여 연구한다. 속도비는, R, $ \frac{U_1-U_2}{U_1+U_2}$ 로 정의되며, 여기서 $U_1$은 분리판 위에서의 자유 유속을 그리고 $U_2$ 는 분리판 아래에서의 자유 유속을 나타낸다. 본 연구에서 와류구조의 병합작용을 분석하기 위하여 2차원 비정상 Large-Eddy Simulation 방법을 적용하였다. 속도비의 변화에 따라 혼합층에서 불안정 Wave가 성장하게 되고, 유체는 2차원 와류구조에서 Roll-up한다. 이러한 2차원 와류구조는 주위의 다른 와류구조와 상호작용을 하게 되고 하나의 커다란 와류구조를 형성하는 것을 볼 수 있다. 혼합층에서 와류병합과정은 반복적으로 일어나는 것을 알 수 있었고, 이 결과를 이용하여 혼합층의 성장을 제어할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.18-27
• /
• 2002

Aerodynamic shape optimization of two-dimensional airfoils in inviscid compressible flows is performed using a continuous adjoint formulation on unstructured meshes. Accurate evaluation of the gradient is achieved by using a reconstruction scheme based on the Laplacian averaging. A least-square method with extended stencil is used for flow gradient calculations. Proper convergence criterion is studied on Euler and adjoint equations for efficient design. The present method has been applied to RAE2822 and NACA0012 airfoils such that wave drag can be minimized by removing the shock wave. An inverse design is also performed to recover the shock wave on the designed RAE2822 airfoil.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.23-28
• /
• 1998

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.25-32
• /
• 2014

Recently supercavitating torpedo has been studied because of its high-speed performance as the next generation of underwater weapon systems. In this study, we present a numerical method based on the potential flow. Characteristic features of the shape of supercavities and drag forces are investigated. In addition, we introduce a viscous-potential method to compensate for the effects of viscosity. The results are compared with viscous calculations using a commercial package, FLUENT V13.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.52-57
• /
• 1997

Dynamic characteristics of compressible flow fields in super-circled constricted tube have been studied numerically. By applying MacCormack's explicit scheme, time marching method with predictor/corrector step, Euler equation is solved to find characteristics of fluid flow in a constricted tube where a two-dimensional inviscid compressible flow is assumed. The effects of tube diameter and aspect ratios on the pressure variations are discussed extensively. The results of the developed numerical schemes are compared with those of commercial FLUENT code, and show a good agreement.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.751-757
• /
• 1986

A three-dimensional calculation is presented on the basis of Wu's theory of quasi-three-dimensional flow in turbo impellers. For the calculation of flow on the Blade-to-Blade stream surface, the finite element method is applied. In this work it is shown that the Kutta condition and the periodicity can be satisfied rationally by the technique of combining a basic through flow in the flow passage and a circulating flow around the blade. The results of numerical calculation are compared with those of the exact solution of the Gostelow's straight cascade and of the experimental results of pressure distribution on the rotating blade surface. It is found that the numerical solutions are in good agreement with the theoretical solution and the experimental results.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The instantaneous location of the solid-liquid interface is fixed for all times by a coordinate transformation. Finite difference method is used to obtain the solution of the unsteady problem, and the growth rate of solid and the transient heat transfer from the surfaces of solid are investigated. The transient solution is dependent on the three dimensionless parameters, but the final steady state is determined by only one parameter of temperature ratio/conductivity ratio. It is observed that the instantaneous heat flux at the surface of solid can be obtained with sufficient accuracy by measuring the thickness of the solid or vice versa.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The solution of dimensionless governing equations is determined by the three dimensionless parameters of (temperature ratio/conductivity ratio), Stefan number, and diffusi-vity ratio. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The equilibrium state is dependent on (temperature ratio/conductivity ratio), but is independent of Stefan number and diffusivity ratio. The effect of fluid flow on the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state, and the characteristics of the solidification process for all the dimensionless parameters are elucidated.