• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1650_1651
• /
• 2009

DC/DC 승압 컨버터는 인덕터 내부 저항으로 인하여 부하 저항의 변화가 시스템 동작점에 영향을 미치게 되며, 이로 하여 제어기 설계의 기준이 되는 선형화된 모델은 불확실성을 가지게 된다. 본 논문은 인덕터의 내부 저항과 출력단의 부하 변동으로 인한 불확실성에 대하여 출력 전압의 강인성을 향상시키기 위해 PI 관측기 기반 적분형 상태 변수 궤환 제어기를 제안한다. PI 관측기는 불확실한 시스템 제어에 널리 사용되는 오차의 적분항을 Luenberger 관측기에 추가한 형태로써 불확실성에 강인한 추정 성능을 보인다. 모의실험을 통해 불확실성이 존재하는 경우 제안된 제어기의 강인성을 확인하고 설계된 관측기가 Luenberger 관측기에 비해 상태변수 추정 성능이 우수함을 보인다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.60-68
• /
• 2007

Conventional analysis of spectral induced polarization (SIP) data consists of measuring impedances over a range of frequencies, followed by spectral analysis to estimate spectral parameters. For the quantitative and accurate estimation of subsurface SIP parameter distribution, however, a sophisticated and stable inversion technique is required. In this study, we have developed a two-step inversion approach to obtain the two-dimensional distribution of SIP parameters. In the first inversion step, all the SIP data measured over a range of frequencies are simultaneously inverted, adopting cross regularisation of model complex resistivities at each frequency. The cross regularisation makes it possible to enhance the noise characteristics of the inversion by imposing a strong assumption, that complex resistivities should show similar characteristics over a range of frequencies. In numerical experiments, we could verify that our inversion approach successfully reduced inversion artefacts. As a second step, we have also developed an inversion algorithm to obtain SIP parameters based on the Cole-Cole model, in which frequency-dependent complex resistivities from the first step are inverted to obtain a two-dimensional distribution of SIP parameters. In numerical tests, the SIP parameter images showed a fairly good match with the exact model, which suggests that SIP imaging can provide a very useful subsurface image to complement resistivity.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.49-58
• /
• 2003

To analyze the anisotropic characteristics of fractured aquifer, variations of streaming potential were measured during and after pumping over several wells at the two test sites. Surface electrical resistivity survey, normal resistivity logging, and slug test were performed at the wells to identify the hydrogeological structure. Applying the results to the recently suggested model, the aquifer of the two test sites showed confined characteristics. Anisotropic direction appeared in using equi-potential maps from self-potential monitoring results matched well with the results of the hydrogeological test. The self-potential monitoring method adopted in this study would be useful for providing a more reliable information on the anisotropy of aquifer in the pumping test at single well.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.741-746
• /
• 2010

It is necessary to estimate more accurately the resistance of barge in still water and waves to compute the break load of towline and towing power for safety towing performance. The method proposed by government has calculated the total resistance of barge which is composed of frictional resistance, wave making resistance and air resistance considering the shape of hull and towing speed. However, the added resistance is equally applied with the significant wave height regardless of the type of vessels. In this study, we have carried out the numerical calculation to estimate the added resistance of wigley model in waves and compared with the experiment data to confirm the accuracy of the method. Then the computation was executed for the barge varying shape of the bow. As a result, added resistance of barge was differently occurred i.e. 0.3∼1.1 ton according to encounter angle, 0.4∼1.2 ton according to towing speed and 0.5∼1.1 ton according to shape of bow.

• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.82-93
• /
• 2018

Resistivity monitoring data at embankment dams are affected by the seasonal temperature variation. Especially when the seasonal temperature variation is large like Korea, the temperature effects may not be ignored in the longterm resistivity monitoring. Therefore, temperature effects can make it difficult to accurately interpret the resistivity monitoring data. In this study, through analyzing the time series of ground temperature collected at an embankment dam, ground temperature variations are calculated approximately. Then, based on the calculated temperature profile with depth, the inverted resistivity model of the embankment dam is corrected to remove the temperature effects. From these corrections, it was confirmed that the temperature effects are significant in the upper, superficial part of the dam, but can be ignored at depth. However, temperature correction based only on the temperature distribution in the dam body cannot remove the temperature effect thoroughly. To overcome this problem, the effect of temperature variation in the reservoir water seems to be incorporated together with the air temperature variation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.60-60
• /
• 1999

단결정 다이아몬드의 열전도도는 약 22W/cm.K로 열전도도가 가장 큰 물질로 알려져 있으며, 비저항은 10$\Omega$.cm 이상의 높은 값을 갖는다. 대부분 열전도도가 큰 것으로 알려진 물질들은 Cu, Ag 등과 같이 전자의 흐름에 의하여 열이 전도되기 때문에 큰 전기전도도를 함께 갖는 것일 일반적이다, 그러나, 다이아몬드는 빠른 phonon의 이동에 의하여 열전도가 이루어지므로 전기적으로 절연 특성을 갖으면서도 큰 열전도가 가능하다. 단결정 다이아몬드는 고방열 절연체로서 이상적인 물질 특성을 보여준다. 전기절연성을 갖는 열전도층으로 다이아몬드를 이용하기 위해서는 저가로 제조가 용이한 화학기상증착법을 이용하여야 한다. 화학기상증착법으로 제조된 다결정 다이아몬드 박막의 열전도도는 약 21W/cm.K로 여전히 매우 높은 값을 갖는 것으로 알려져 있지만, 비저항 값은 인위적으로 도핑을 전혀 하지 않은 상태에서도 106$\Omega$.cm 정도의 낮은 값을 갖는다. 전혀 도핑을 하지 않았음에도 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여 주고 있으므로 이에 대한 연구는 주로 전기 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여주고 있으므로 이에 대한 연구는 주로 전기전도성의 원인을 규명하는데 집중되고 있다. 아직 명확한 전도 기구는 제안되고 있지 못하지만 전도성의 원인은 수소와 관련이 있고 전도는 표면을 통하여 이루어진다는 것이다. 산(acid)을 이용하여 다결정 다이아몬드 박막을 세척하면 전기 전도성이 사라지고 높은 저항값을 갖는 박막을 얻게 되는데 박막을 세척하는 공정은 박막의 표면만을 변호시키므로 표면에 있던 전기전도층이 용액 처리를 통하여 제거되므로 전도성이 사라진다고 생각하는 것이다. 그러나, 본 연구에서는 두께가 두꺼울수록 저항값이 증가하는 것이 관찰되었고 기존의 측정방식인 수평적인 저항 측정법에 대하여 수직적 방향으로 저항을 측정하면 저항값이 1/2 정도 작게 측정되었다. 다결정 다이아몬드에서 표면을 통하여 전류가 흐른다면 박막의 두께에 따른 변화가 나타나지 않아야 하고 수직적인 전류 측정법이 오히려 더 큰 저항을 보여주어야 한다. 기존의 표면 전도 모델로는 설명되지 못하는 현상들이 관찰되었고 정확한 전기 전도 경로를 확인하기 위하여 전해 도금법으로 금속들이 석출되는 모습을 관찰하였다. 이 방법을 통하여 다결정 다이아몬드에서 전류는 결정입계를 통하여 전도됨을 알 수 있었다. 온도에 따른 다결정 다이아몬드의 전기전도도 변화를 관찰하였고 이로부터 활성화 에너지 값을 구할 수 있었다. 다결정 다이아몬드의 전도도는 온도에 따라서 0.049eV와 0.979eV의 두 개의 활성화 에너지를 갖는 구간으로 나뉘어졌다. 이로부터 다결정 다이아몬드에는 활성화 에너지 값이 다른 두 종류의 defect level이 형성되는 것으로 추정할 수 있고 이 낮은 defect level에 의하여 전도성을 갖는 것으로 생각된다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.15-16
• /
• 2015

본 논문은 리튬 이온 배터리의 실시간 등가회로 모델링의 정확도 개선을 위한 방법을 제안한다. 기존의 실시간 변수 추출 방법은 다수의 비선형 변수를 포함한 2차 RC ladder 모델을 기반의 변수 추출이 어렵다. 개선된 방법은 오프라인 변수 추출 결과를 기준값으로 저항성분을 실시간으로 추정하여 보정하는 방법을 사용한다. 각 실시간 모델링 방법별로 배터리 모델을 완성하고 단자 전압을 재현하여 정확도를 검증한다.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.99-108
• /
• 2022

Among induced polarization (IP) methods, spectral IP (SIP) uses alternating current as a transmission source to measure amplitudes and phase of complex electrical resistivity at each source frequency, which disperse with respect to source frequencies. The frequency dependence, which can be explained by a relaxation model such as Cole-Cole model or equivalent models, is analyzed to estimate SIP parameters from dispersion curves of complex resistivity employing multi-objective optimization (MOO). The estimation uses a generic algorithm to optimize two objective functions minimizing data misfits of amplitude and phase based on Cole-Cole model, which is most widely used to explain IP relaxation effects. The MOO-based estimation properly recovered Cole-Cole model parameters for synthetic examples but hardly fitted for the real laboratory measures ones, which have relatively smaller values of phases (less than about 10 mrad). Discrepancies between scales for data misfits of amplitude and phase, used as parameters of MOO method, and it is in necessity to employ other methods such as machine learning, which can deal with the discrepancies, to estimate SIP parameters from dispersion curves of complex resistivity.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.153-164
• /
• 2009

We examined the regional 1-D deep resistivity structure of the Korean Peninsula using MT data acquired at seven sites located in the Kyongsang Basin and Kyonggi Massif. At the sites located in the Kyongsang Basin, surrounding sea distorts observed MT response and hence this distortion, so called "sea effect", is corrected using an iterative tensor stripping method. The 1-D layered inversion results for the seven MT sites reveal 4 layered structure, which is composed of 1) near surface layer, 2) upper crust, 3) lower crust and upper mantle, and 4) asthenosphere from the surface downward. Conrad interface, which is a boundary between upper and lower crust, is distinctly identified beneath all the MT sites. Conrad interface depth is estimated to about be 17km in the Kyongsang Basin and about 12km in the Kyonggi Massif, while the upper crust of the Kyongsang Basin is about 5 times more resistive than that of the Kyonggi Massif. Finally, asthenosphere is inferred to exist below a depth of approximately 100km with a resistivity of 200-300 ohm-m.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.503-514
• /
• 2006

FBG sensors are capable of measuring the strain of structures easily and more durably than electric resistance gauges. Thus, many researches are dedicated to the application for the response monitoring or non-destructive evaluation of structures using FBG sensors. Additionally, the measured strains at the top and bottom of a cross-section can be transformed into the curvature of the section, which can be used to calculate its vertical displacement. Hence, this study aims to measure the dynamic strain signals of a steel section simply supported beam and to estimate the dynamic displacement from the strain signals, after which the estimated displacement is com pared with the measured displacement. The dynamic characteristics (natural frequency, damping ratio and mode shape) of the beam are predicted from both the estimated and measured displacement signals, and from the strain time history of the FBG sensors. The predicted properties are compared with those of an analytical model of the beam. The estimated displacement. However, the predicted dynamic properties from both the estimated displacements and the measured strains are well-correlated with those from the measured displacement. It is therefore appreciated that the estimation of the dynamic properties of FBG sensor signals is reasonable. Especially, the strain signal of the FBG sensor was amplified at a higher-frequency region in comparison with the displacement estimation with higher-mode properties.