• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.23-33
• /
• 2021

In Korea, many reservoirs have been built for the purpose of solving the food shortage problem and supplying agricultural water. However, the current 75.6% of the reservoirs are in serious aged as more than 50 years have passed since the year of construction. In the case of such an aging reservoir, the stability due to scour and erosion inside the reservoir is very reduced, and if concentrated rainfall due to recent abnormal weather occurs, the aging reservoir may collapse, leading to a lot of damage to property and human life. Accordingly, each agency that manages aging reservoirs uses Ordinary Portland Cement (OPC) as an injection material and applies the grouting method. However, in the case of OPC, it may deteriorate over time and water leakage may occur again. And there are environmental problems such as consumption of natural resources and generation of greenhouse gases. So, there is a need to develop new materials and methods that can replace the OPC. In this study, an laboratory test and analysis were performed on the grout material developed to induce a curing reaction similar to that of OPC by recycling power plant byproduct. In addition, test in the field such as electric resistivity survey, Standard Penetration Test (SPT), and field permeability test were performed to analyzed to reinforcement effect and determine the possibility of using instead of OPC. As a results of the test, in the case of recycled power plant byproduct, the compressive strength was 2.9 to 3.2 times and the deformation modulus was 2.3 to 3.3 times higher, indicating that it is excellent in strength and can be used instead of OPC. And it was analyzed that the N value of the reservoir was increased by 1~2, and the coefficient of permeability (k) decreased to the level of 8.9~42.5%. showing sufficient reinforcing effect in terms of order.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.16-22
• /
• 2021

This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was 'Greencall' developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (㎡) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.

• Journal of Plant Biotechnology
• /
• v.49 no.2
• /
• pp.118-123
• /
• 2022

To obtain information on the molecular mechanism underlying the low temperature tolerance of sweet potato [Ipomoea batatas (L.) Lam], the proteome expressed in the sweet potato cultivar Xushu 15-1 with high cold storage tolerance and in the cultivar Xushu 15-4 with low cold storage tolerance was analyzed using 2-D and MALDI-TOF/TOF analyses. Compared with the control (without cold treatment), four protein spots were newly expressed in Xushu 15-1. The expression level of one protein spot was higher in Xushu 15-4 than in Xushu 15-1. Spot 2, which was newly expressed in Xushu 15-1, was identified as sporamin. Assessment of the change in protein expression levels over 8 weeks in the storage roots of the two cultivars treated at 4℃ revealed no significant difference in the expression levels in Xushu 15-1 over time. However, in Xushu 15-4, the expression level of one protein spot increased, while those of four spots decreased. Of the proteins with reduced expression levels, spots 7 and 8 were identified as actin and spots 9 and 10 were identified as fructokinase-like proteins. The present results are expected to enhance the understanding of the complex mechanism underlying the low temperature tolerance of sweet potatoes during storage and can be used to identify candidate genes for the development of new varieties of sweet potatoes with improved low temperature tolerance during cold storage in the future.

• Journal of Life Science
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2022

Natural products have gained increasing attention due to their advantage of long-term safety and low toxicity for a very long time. Torreya nucifera is widespread in southern Korea and Jeju Island and its seeds are commonly used as edible food. Oriental ingredients have often been reported for their insecticidal, antioxidant and antibacterial properties, but there have not yet been any studies on their antidiabetic effect. In this study, we investigated several biological activities of T. nucifera pericarp (TNP) and seeds (TNS) extracts and proceeded to characterize the antidiabetic compounds of TNS. The initial results suggested that TNS extract at 15 and 10 ㎍/ml concentration has inhibitory effects on α-glucosidase and protein tyrosine phosphatase 1B, that is 14.5 and 4.35 times higher than TNP, respectively. Thus, the stronger antidiabetic TNS was selected for the subsequent experiments to characterize its active compounds. Ultrafiltration was used to determine the apparent molecular weight of the active compounds, showing 300 kDa or more. Finally the mixture was then partially purified using Diaion HP-20 column chromatography by eluting with 50~100% methanol. Therefore we concluded that the active compounds of TNS have potential as therapeutic agents in functional food or supplemental treatment to improve diabetic diseases.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.651-662
• /
• 2022

The electrochemical impedance spectroscopy(EIS) method was used to evaluate the concrete deterioration process related to chloride-induced steel corrosion with various corrosion levels(initiation, rust propagation and acceleration periods). The impressed current technique, with four total current levels of 0C, 13C, 65C and 130C, was used to accelerate steel corrosion in concrete cylinder samples with w/c ratio of 0.4, 0.5, and 0.6, immersed in a 0.5M NaCl solution. A series of EIS measurements was performed to monitor concrete deterioration during the accelerated corrosion test in this study. Some critical parameters of the equivalent circuit were obtained through the EIS analysis. It was observed that the charge transfer resistance(R_c) dropped sharply as the impressed current increased from 0C to 13C, indicating a value of approximately 10kΩcm². However, the sensitivity of R_c significantly decreased when the impressed current was further increased from 13C to 130C after corrosion of steel had been initiated. Meanwhile, the double-layer capacitance value(C_dl) linearly increased from 50×10^-6μF/cm² to 250×10^-6μF/cm² as the impressed current in creased from 0C to 130C. The results in this study showed that monitoring C_dl is an effective measurement parameter for evaluating the progress of internal concrete damages(de-bonding between steel and concrete, micro-cracks, and surface-breaking cracks) induced by steel corrosion. The findings of this study provide a fundamental basis for developing an embedded sensor and signal interpretation method for monitoring concrete deterioration due to steel corrosion at various corrosion levels.

• Journal of Life Science
• /
• v.32 no.4
• /
• pp.325-330
• /
• 2022

While swimming is a very popular competitive sports activity, swimming injuries are unique due to the repetitive nature of the swimming stroke and demanding training programs that can result in upper limb overuse. Therefore, the primary objective of this review was to analyze swimmers' injury areas, injury types by stroke type, and swimming rehabilitation, as well as to discuss safety management for improving swimming performance. In this study, the injuries incurred in swimming events were discussed in the order of upper limb injuries (neck, shoulder, arm, and wrist), lower limb injuries (knee and ankle), and waist injuries. An analysis by stroke type found that shoulder injuries occurred most often with freestyle, backstroke, and butterfly strokes, followed by rotator cuff injury, impingement syndrome, and SLAP (superior labral tear from anterior to posterior) lesions. Knee injuries were associated with the breaststroke, whereas spinal cord injuries occurred with the breaststroke and butterfly stroke. Finally, back injuries were associated with the butterfly stroke. During the freestyle stroke, the shoulder undergoes repetitive overhead movement; hence, shoulder and musculoskeletal pain are the most common and well-documented complaints of swimmers. For safety management, coaches and instructors must ensure that athletes do sufficient warm-up and cool-down exercises to avoid injuries. In case of an injury, they should be familiar with first aid measures so that secondary damage can be prevented with its quick application. In addition, coaches and instructors need to be trained in injury prevention and treatment so that they can provide appropriate rehabilitation treatment for athletes. Although swimming-related injuries cannot be completely eliminated, to reduce them to a minimum, leaders need the knowledge to apply scientific and systematic training principles and methods individualized for each athlete.

• Korean Journal of Food Science and Technology
• /
• v.54 no.4
• /
• pp.377-385
• /
• 2022

This study examined the dietary fiber content of potato and physicochemical characteristics of potato starch isolated from various cultivars. The total dietary fiber content of the Arirang1ho cultivar was 6.30%, which was higher than that of other cultivars. The amylose content ranged from 36.76-55.75%, with Sooseon having the highest amylose content. Analysis of the degree of amylopectin polymerization revealed that all cultivars had a high proportion of DP (degree of polymerization) 13-24. The phosphate content ranged from 45.90-84.23 mg/100 g, with Arirang1ho having the highest and Eunseon having the lowest phosphate content. The resistant starch content ranged from 58.94-79.87%. Geumseon showed the highest breakdown in the range of 587.45-1,129.72 RVU (rapid viscosity unit). Sooseon had the lowest gelatinization enthalpy value for potato starch in the range of 5.54-7.64 J/g. These results provide basic data for the use of potatoes in industrial applications.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.588-595
• /
• 2010

Background: Base on types of tumor, the types of expressed tumor is diverse and the difference in its expression rate is even more various. Due to such reasons an animal model is absolutely needed for a clinical research of lung cancer. The author attempted oncogenesis by cultivating a cell line of non-small cell carcinoma and then injecting it inside thoracic cavities of nude mice. The author conducted quantitative analyses of HER2/neu tumor gene - an epidermal growth factor receptor (EGFR) related to lung cancer, and TGF-${\beta}_1$, which acts as a resistance to cell growth inhibition and malignant degeneration. In order to investigate achievability of the oncogenesis, histological changes and the expression of cancer gene in case of orthotopic lung cancer is necessary. Material and Method: Among 20 immunity-free male BALB/c, five nude mice were selected as the control group and rest as the experimental group. Their weights ranged from 20 to 25 gm (Orient, Japan). After injection of lung cancer line (SW900 G IV) into the pleural cavity of nude mice, They were raised at aseptic room for 8 weeks. HER2/neu was quantitatively analyzed by separating serum from gathered blood via chemiluminiscent immunoassay (CLIA), and immunosandwitch method was applied to quantitatively analyze TGF-${\beta}_1$. SPSS statistical program (SPSS Version 10.0, USA) was implemented for statistical analysis. Student T test was done, and cases in which p-value is less than 0.05 were considered significant. Result: Even after lung cancer was formed in the normal control group or after intentionally injected lung cancer cell line, no amplification of HER2/neu gene showed reaction. However, the exact quantity of TGF-${\beta}_1$ was $28,490{\pm}8,549pg/mL$, and the quantity in the group injected with lung cancer cell was $42,362{\pm}14,449pg/mL$, meaning 1.48 times highly Significant (p<0.483). It proved that HER2/neu gene TGF-${\beta}_1$ had no meaningful interconnection. Conclusion: TGF-${\beta}_1$ gene expressed approximately 1.48 times amplification in comparison to the control group. The amplification of TGF-${\beta}_1$ meant somatic recuperation inhibition mechanism due to carcinogenesis in nude mice was definitely working. It may be implemented as a quantitative analysis that allows early detection of lung cancer in human body.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.