• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.503-512
• /
• 2010

In AASHTO LRFD (2007), a compact section is defined as a section in which no premature failure caused by local buckling of web and flange plate or later buckling occurs before the section reaches the plastic moment, Mp. The current AASHTO LRFD (2007) provides the compact section requirement by limiting the web slenderness only for webs without longitudinal stiffeners. The role of longitudinal stiffener is to increase the web buckling strength caused flexure. Although a web does not satisfy the compactness requirement without longitudinal stiffeners, the web buckling can be prevented by use of valid longitudinal stiffeners. Therefore, the web may be able to reach the plastic moment. However, the reason why a longitudinal stiffener may not be used to satisfy compactness requirement is not cleary explained in AASHTO LRFD (2007). In this study, the buckling and ultimate strength behaviors of stiffened webs subjected to bending are investigated through the linear buckling and nonlinear finite element analysis. It is found that steel plate girders having webs that do not satisfy the compactness requirement are able to reach the plastic moment if the longitudinal stiffeners have sufficient rigidities and are properly located. From a nonlinear regression analysis of the results, a new compactness requirement is suggested for webs stiffened with one longitudinal stiffener.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.11-19
• /
• 2006

In this study ship collision risk analysis is performed to determine the design vessel for collision impact analysis of suspension bridge. Method II in AASHTO LRFD bridge design specifications which is a more complicated probability based analysis procedure is used to select the design vessel for collision impact. From the assessment of ship collision risk for each bridge pier exposed to ship collision, the design impact lateral strength of bridge pier is determined. The analysis procedure is an iterative process in which a trial impact resistance is selected for a bridge component and a computed annual frequency of collapse(AF) is compared to the acceptance criterion, and revisions to the analysis variables are made as necessary to achieve compliance. The acceptance criterion is allocated to each pier using allocation weights based on the previous predictions. This AF allocation method is compared to the pylon concentration allocation method to obtain safety and economy in results. This method seems to be more reasonable than the pylon concentration allocation method because AF allocation by weights takes the design parameter characteristics quantitatively into consideration although the pylon concentration allocation method brings more economical results when the overestimated design collision strength of piers compared to the strength of pylon is moderately modified. The design vessel for each pier corresponding with the design impact lateral strength obtained from the ship collision risk assessment is then selected. The design impact lateral strength can vary greatly among the components of the same bridge, depending upon the waterway geometry, available water depth, bridge geometry, and vessel traffic characteristics. Therefore more researches on the allocation model of AF and the selection of design vessel are required.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.245-257
• /
• 2023

The representative crop in the Republic of Korea, rice, is cultivated over extensive areas every year, which resulting in reduced resistance to pests and diseases. One of the major rice diseases, rice blast disease, can lead to a significant decrease in yields when it occurs on a large scale, necessitating early detection and effective control of rice blast disease. Drone-based crop monitoring techniques are valuable for detecting abnormal growth, but frequent image capture for potential rice blast disease occurrences can consume significant labor and resources. The purpose of this study is to early detect rice blast disease using remote sensing data, such as drone and satellite images, along with weather data. Satellite images was helpful in identifying rice cultivation fields. Effective detection of paddy fields was achieved by utilizing vegetation and water indices. Subsequently, air temperature, relative humidity, and number of rainy days were used to calculate the risk of rice blast disease occurrence. An increase in the risk of disease occurrence implies a higher likelihood of disease development, and drone measurements perform at this time. Spectral reflectance changes in the red and near-infrared wavelength regions were observed at the locations where rice blast disease occurred. Clusters with low vegetation index values were observed at locations where rice blast disease occurred, and the time series data for drone images allowed for tracking the spread of the disease from these points. Finally, drone images captured before harvesting was used to generate spatial information on the incidence of rice blast disease in each field.

• Environmental and Resource Economics Review
• /
• v.32 no.4
• /
• pp.239-266
• /
• 2023

This study applied the contingent valuation method (CVM) to measure the benefits from an urban liner park that will be created as part of the Gyeongin Expressway downgrade project by Inchon metropolitan city government. The Incheon city government plans to create a liner park (10.5 km) in the middle of the downgraded road to provide leisure and recreation services to residents, and plans to remove retaining walls and soundproof walls to improve the urban residential environment. Considering the characteristics of a liner park that spans several districts in Incheon city and the downgraded road that will be passed by residents of nearby cities as well as Incheon residents, the target population included residents of part of Seoul and several cities surrounding Incheon. In a CVM survey of 1,000 respondents conducted in April 2018, about 70% of the respondents perceived this project positively. About 50% of 757 respondents, excluding protest bids respondents, were willing to pay additional taxes for this project. The more the respondents favored the creation of a linear park and the more they thought that this project would improve the surrounding residential environment, the more positively they evaluated the additional tax payment. The average annual willingness to pay for this project was about 15,300 won for Incheon residents and 6,800 won for residents of Seoul metropolitan area. It is interesting to observe that residents of Seoul metropolitan area, who are not directly affected by this project, were willing to pay a considerable amount for this project.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.105-111
• /
• 2023

Electronic devices have been evolved to be mechanically flexible that can be endured repetitive deformation. This evolution emphasizes the importance of long-term reliability in metal wiring connecting electronic components, especially under bending fatigue in compressed environments. This study investigated methods to enhance adhesion between copper (Cu) and polyimide (PI) substrates, aiming to improve the reliability of copper wiring under such conditions. We applied oxygen plasma treatment and introduced a chromium (Cr) adhesion layer to the polyimide substrate. Our findings revealed that these adhesion enhancement methods significantly affect compression fatigue behavior. Notably, the chromium adhesion layer, while showing weaker fatigue characteristics at 1.5% strain, demonstrated superior performance at 2.0% strain with no delamination, outperforming other methods. These results offer valuable insights for improving the reliability of flexible electronic devices, including reducing crack occurrence and enhancing fatigue resistance in their typical usage environments.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.41-47
• /
• 2023

This study was conducted to determine the effect of an exercise program applied to prevent musculoskeletal changes that occur due to aging on pain, muscle strength, balance ability, and falling efficacy in elderly women. An exercise program including quadriceps setting exercise, bridge exercise, resistance band exercise, and foam roller exercise was applied to elderly women aged 65 years or older once a week for 8 weeks. A visual analog scale was used to evaluate pain, muscle strength was evaluated using a digital muscle strength meter, balance ability was measured using the Berg balance scale, and fear of falling was evaluated using the fall efficacy scale. As a result of the study, compared to before the experiment, pain in the lower back and knee area was significantly reduced, the strength of the quadriceps femoris and gluteus maximus was significantly increased, and balance ability and falling efficacy were significantly improved. In conclusion, application of a program that includes various exercise methods has a positive effect on the physical activity of elderly women by strengthening the musculoskeletal system. Additionally, in order to prevent physical changes due to aging, an exercise program that includes various exercise methods that can strengthen the musculoskeletal system should be applied.

• Journal of Life Science
• /
• v.34 no.6
• /
• pp.393-398
• /
• 2024

The purpose of this study was to verify the antifungal properties of various herbal medicines belonging to the Ranunculaceae family and to find an extraction method effective in inhibiting fungal growth. When antifungal activity was measured in a liquid medium with extracts obtained by either hot water extraction or organic solvent extraction of the herbal medicines Clematis apiifolia, Coptis chinensis, and Pusatilla chinensis, effective results were obtained from the chloroform extract. In addition, fungal growth inhibition experiments were performed on unicellular fungi, Candida albicans, Candida tropicalis, and Candida lusitaniae, and on filamentous fungi, such as Pythium ultimum, Aspergillus fumigatus, and Fusarium oxysporum, using disk diffusion experiments on solid media. It was confirmed that P. chinensis extract has excellent antifungal properties against Candida spp. and C. apiifolia extract against filamentous mold. Finally, GC-MS analysis was performed to explore the useful antifungal substances present in the extract. As a result of the study, thurbergenone from C. apiifolia and 16-hydroxycleroda-3, 13(14)-dien-15, 16-olide (16-HCDO) from C. chinensis were confirmed as antifungal candidates. In conclusion, it was confirmed that C. apiifolia, C. chinensis, and P. chinensis have antifungal activity against various fungi, and in GC-MS analysis, all herbal medicines were confirmed to have different antifungal candidates. These results indicate that the Ranunculaceae family has evolved in several directions for fungal resistance traits.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.154-162
• /
• 2024

Anion exchange membranes (AEMs) are essential components in water electrolysis systems, serving to physically separate the generated hydrogen and oxygen gases while enabling the selective transport of hydroxide ions between electrodes. Key characteristics sought in AEMs include high ion conductivity and robust chemical and mechanical stability in alkaline. In this study, quaternized Poly(terphenyl piperidinium)/cellulose nanocrystals (qPTP/CNC) mixed matrix membrane was fabricated. The polymer matrix, PTP, was synthesized via super-acid polymerization, known for its excellent ion conductivity and alkaline durability. The qPTP/CNC membrane showed a dense and uniform morphology without significant voids or large aggregates at the polymer-nanoparticle interface. The qPTP/CNC membrane containing 2 wt% CNC demonstrated a high ion exchange capacity of 1.90 mmol/g, coupled with low water uptake (9.09%) and swelling ratio (5.56%). Additionally, the qPTP/CNC membrane showed significantly lower resistance and superior alkaline stability (384 hours at 50℃ in 1 M KOH) compared to the commercial FAA-3-50 membrane. These results highlight the potential of hydrophilic additive CNC in enhancing ion conductivity and alkaline durability of ion exchange membranes.

• Korean journal of applied entomology
• /
• v.63 no.1
• /
• pp.43-51
• /
• 2024

Thrips infest hot peppers (Capsicum annuum) cultivating in open fields and give serious economic damages. This study reports their yearly occurrence from transplanting to harvest at three different places in Andong, an intense hot pepper-cultivating area. Two main occurrence peaks were detected in June and September. Two dominant thrips were the flower flowers, Frankliniella occidentalis and F. intonsa, which comprised of over 87% of the total occurring thrips. Other thrips did not follow the occurrence peaks of the two dominant species. Tomato spotted wilt virus (TSWV) was detected from the dominant two species, in which higher viruliferous rate was recorded in F. intonsa. Although the hot peppers were the resistant varieties against TSWV, some of them cultivating in the fields exhibited a characteristic disease symptom infected by the virus over the growing seasons. TSWV was isolated from the viruliferous thrips and assessed in NSs sequences encoded in S RNA segment of the virus. Compared to the known resistance breaking (RB) strains, the TSWV isolated from the viruliferous thrips in Andong did not show any RB mutations.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.484-491
• /
• 2023

Tomatoes in greenhouse are a widely cultivated horticultural crop worldwide, accounting for high production and production value. When greenhouse ventilation is minimized during low temperature periods, CO₂ enrichment is often used to increase tomato photosynthetic rate and yield. Plant-induced electrical signal (PIES) can be used as a technology to monitor changes in the biological response of crops due to environmental changes by using the principle of measuring the resistance value, or impedance, within the crop. This study was conducted to investigate the relationship between tomato growth data, vital response, and PIES resulting from CO₂ enrichment in greenhouse tomatoes. The growth of tomato treated with CO₂ enrichment in the morning was significantly better in all items except stem diameter compared to the control, and PIES values were also higher. The growth of tomato continuously applied with CO₂ was better in the treatment groups than control, and there was no significant difference in chlorophyll fluorescence and photosynthesis. However, PIES and SPAD values were higher in the CO₂ treatment group than control. CO₂ enrichment have a direct relationship with PIES, growth increased, and transpiration increased due to the increased leaf area, resulting in increased water absorption, which appears to be reflected in PIES, which measures vascular impedance. Through this, this study suggests that PIES can be used to monitor crops due to environmental changes, and that PIES is a useful method for non-destructively and continuously monitoring changes of crops.